Development of catalysts for hydrogen generation from hydride compounds

Catalytic hydrolysis of NaBH₄ and NH₃BH₃ has been studied. It was shown that the nature of the support and the active component of the catalyst affect the H₂ generation rate. Despite similar sizes of rhodium particles formed on the surface of different supports (γ-Al₂O₃, TiO₂, carbon), their reactivity is different. Rh/TiO₂ with low rhodium concentration (1 wt.%) is the most active catalyst both in the hydrolysis of NaBH₄ and NH₃BH₃. The obtained results show that the rhodium chloride interaction with titania determines the reactivity of rhodium particles formed under action of NaBH₄ medium. TEM, DRS UV–vis and XPS were used to characterize the catalysts.     

Effect of modifying additions on the binding properties of lignosulfonates

The effect of various modifying additions to technical lignosulfonates used in the production of periclase (from fused and sintered periclase), chromite-periclase, and thermostable chromite-periclase articles is investigated. An acceptable strength for the green material for periclase articles is provided by lignosulfonates produced by the Kamsk Wood-Pulp and Paper Plant. The recommended modifying addition is carbamide. An addition of tall oil reduces the strength of greenware but improves the properties of articles after firing. Lignosulfonates with additions of carbamide, aluminum chloride, and titanium sulfate are considered the most efficient for chromium-containing articles.Translated from Ogneupory, No. 12, pp. 15 – 21, December, 1994.     

The integral experiment on beryllium with D-T neutrons for verification of tritium breeding

A clean benchmark experiment on beryllium was performed with D-T neutrons at the FNS facility of the Japan Atomic Energy Agency. The main objective was to verify the integral data related to the tritium production on lithium isotopes. Tritium production rates, as well as activation reaction rates were measured inside the beryllium assembly that was shaped as a pseudo-cylindrical slab with an area-equivalent diameter of 628 mm and a thickness of 355 mm. Experimental results were analyzed with a three-dimensional Monte Carlo transport code MCNP-4C and FENDL/MC-2.0, JENDL-3.2/3.3 neutron transport libraries. Evaluation of reaction rates was based on the cross section data taken from the JENDL Dosimetry File and ENDF B-VI data libraries. Analysis shows that all calculation combinations (transport and activation cross section libraries) used for evaluation of reaction rates give data that is agreeable with measured values within 10%.     

Robust adaptive control of robotic manipulators without the regressor matrix

A new adaptive controller is presented here for rigid-body robotic manipulators. It is stable and robust with respect to a class of external disturbances. The robustness of the adaptive controller is established without the ‘slow-varying’ assumption and the computationally demanding regressor matrix. The control law consists of a non-adaptive PD control part and an adaptive control part. It uses two adaptive matrices to compensate two uniformly bounded coefficient matrices derived from the original dynamics. A α σ|q?|-modified adaptive law is designed to adjust the adaptive matrices. A Lyapunov-type stability analysis indicates that the closed-loop system is uniformly ultimately bounded. The tracking error and compensation error will eventually converge into a closed region, which can be made arbitrarily small by adjusting the controller parameters. Simulation results are included to demonstrate the performance of the proposed controller.     

Isolation of lactic whey proteins in the form of complexes with apple pectin

The possibility of isolating lactic whey proteins (LWP) in the form of insoluble complexes (IC) with apple pectin was studied. The effect of pH, ionic strength (mu, NaCl), temperature (T degree C), pectin weight fraction (X3%) and the total concentration of macromolecular components in the system (Ws) on isolation has been considered. The process has been characterized by LWP yield in the composition IC--P, percentage and the extent of protein concentration in the concentrated phase (IC)--F. The mixing of lactic whey with a pectin solution usually yielded an IC (10% less than or equal to X3 less than or equal to 90%). The dependence of P on X3 is of an extreme nature with a maximum of 85% at X3 = 60%. The following conditions correspond to the maximum LWP yield (90%) in the complex composition: pH 3.4, mu = 0.01, T = 5-20 degrees C, X3 = 60%, Ws = 0.5%. At compositions of the system corresponding to the maximum P value (X3 = 60%) practically all the LWP fractions are present in the concentrated phase. If X3 much greater than 60% or X3 much less than 60% alpha-lactalbumin is practically absent in the concentrated phase. Usually, minimum F values (2.5-4.0) correspond to maximum protein yield at X3 = 60%. At X3 greater than 70% and X3 less than 50% F values may be considerably higher (20 times and more). A decrease in the pectin methylation degree from 56.7% down to 15.4% does not affect F. The maximum protein yield (94%) occurs when low methylated pectin is used. The character of the dependence of F on X3 is explained according to similar processes of complex gel formation and the processes of gel formation in polymer solutions.     

Structural group composition of sulfonate additives

Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 9, pp. 34–35, September, 1990.     

Mechanical Properties and Oxidation Behavior of Al2O3–AlN–TiN Composites

The study examines the effect which the composition of hot-pressed electroconductive ceramics has on their structure, mechanical properties, and oxidation behavior, for ceramics of the type AIN–Al₂O₃–42 wt% TiN, differing in the AIN/Al₂O₃ ratio. The results are physico-mechanical property data, including density, hardness, strength, fracture toughness, and wear resistance. A correlation was found between the wear resistance and fracture toughness. The analysis of oxidation products revealed the formation of α-Al₂O₃ and rutile in the temperature range from 600° to 1100°C and aluminum titanate above 1200°C. The spallation of the oxide layer caused low oxidation resistance of Al₂O₃-rich composites above 1250°C. The oxidation of composites was compared with the oxidation of pure TiN. The relationship is discussed between material properties, composition, phases, and processing parameters.