The traditional Yemeni window and natural lighting

The traditional Yemeni window is considered to be one of the most important elements that characterize the yemeni architecture. The beauty of the traditional Yemeni window comes from its four main components which combined the functions of view, lighting, ventilation, protection, and privacy. These functions can be controlled by the occupants according to their social and environmental needs. The four main components are the lower part (Taqah), the fanlight (Qamariyah), the wooden external overhang (Konnah), and the small vent (Shaquos). Since fanlights provide natural lighting during day-time, the area of the lower part can be reduced and its exterior shutters can be closed without the need for artificial lighting. The internal natural lighting that is provided by the upper and lower parts of the window was investigated to see its quality. In this investigation, there were two main goals. The first is the contribution and quality of the internal light provided by the Qamariyah when shutters are closed. The second is the effect of the internal simple white cloth curtains, in the lower part, in the internal light quality. Visual measurements were taken in a typical room of a traditional house of the Old City of Sana'a, Yemen. From the findings, it was found that the fanlights (Qamariyat) provide low and soft homogeneous internal lighting which was as low as 22 lux average. However, the occupants have the ability to increase level of lighting to as high as 600 or 700 lux. This can be done simply by deciding which shutter to open and how many of them to be opened. In this paper, the methodology and findings will be presented and discussed.     

Electromagnetic scattering by metallic holes and its applicationsin microwave circuit design

The problem of arbitrarily incident plane-wave scattering from rod structures of thick conducting plates arranged with two-dimensional (2D) periodicity has been examined. The square approximation as well as truncated-square approximation of circular cross sections is used in this study. The impedance of cascaded screens and the reflection coefficient is calculated using the multimodal variational method for both TE- and TM-polarized incident electric field. The 2D periodic structure of holes described in this paper can be used for the purpose of designing new guiding microwave structures. A transverse resonance method is applied to solve this problem. The convergence behavior of the technique has also been examined. The numerical results of the reflection coefficient, surface impedance, and dispersion curves are presented     

A basic program for calculating subsurface water temperatures using chemical geothermometers-implication to geothermal reservoir estimation

GEOTHERM is a computer program written in BASIC language to estimate geothermal reservoir temperature using the well-known chemical gèothermometers. The empirical equations used in the program were obtained from the literature. Three different chemical geothermometers are included in the program: Na-K, Na-K-Ca, and silica geothermometers; this gives the user the opportunity not only to select the most reliable geothermometer in estimating subsurface temperature, but also to select the type of geothermometer according to available data. A sample input file of geothermal waters obtained from Iceland has been tested, so as to show the applicability and usefulness of the program.     

Synthesis and Thermal Treatment of Pd-Cr@Carbon for Efficient Oxygen Reduction Reaction in Proton-Exchange Membrane Fuel Cells

A nanostructured Pd-Cr catalyst was deposited on a supported carbon surface using the modified borohydride reduction method for the oxygen reduction reaction (ORR) to be utilized as an efficient catalyst in the proton-exchange membrane fuel cell. The crystal structure and feature nanostructure of the Pd-Cr@carbon were established through the use of X-ray powder diffraction (XRD) and transmission electron microscopy (TEM). Meanwhile, its catalytic activity was studied using the cyclic voltammetry and electrochemical polarization techniques. Based on the XRD analysis, it was observed that the Pd phase with the fcc crystal structure was dominant, while the Pd-Cr phase with tetragonal crystal structure was detected only for the as-prepared sample and samples calcined at 573 K. The estimated average crystallite size of the Pd phase increased from 9.66 to 37.54 nm as the calcination temperature increased to 973 K, and the calcination time had a slight effect on the crystallite size. On the other side, the average crystallite size for the formed Pd-Cr phase slightly increased from 43.74 nm for the as-prepared sample to 44.90 nm for the sample calcined at 573 K for 3 h. The TEM examination revealed the uniform distribution of the Pd and Pd-Cr nanoparticles upon the carbon surface. The calcination temperature and time played an important role in controlling the structural and morphology parameters of Pd-Cr@carbon. The adsorption/desorption potentials were found to be dependent on the calcination temperature and time and hence the particle and crystallite sizes. The optimum ORR activity and chemical stability were observed for samples calcined at 773 K for 3 h.

     

Miscibility enhancement of poly(vinyl chloride)/polystyrene blend: Application to membrane separation of benzene from benzene/cyclohexane mixture by pervaporation

In order to improve the miscibility of poly(vinyl chloride)/polystyrene (PVC/PS) system and to use the prepared material as a membrane to separate benzene from benzene/cyclohexane mixture by pervaporation technique, two poly(styrene-co-N-vinylpyrrolidone) (PSVP) copolymers containing 6.67 and 13.55 mol% of N-vinylpyrrolidone (N-VP) contents were synthesized through a radical polymerization. A comparative study of the miscibility of the PVC/PSVP blends with different compositions was carried out using differential scanning calorimetry, viscosimetry and Fourier transform infrared spectroscopy methods in which the interaction parameters between the two components were widely investigated. To improve the pervaporative flux of PVC membrane to separate benzene from benzene/cyclohexane mixture, a preliminary test of swelling and sorption was performed on PVC/PSVP7 membranes using an azeotropic benzene/cyclohexane mixture. It was revealed that the PVC/PSVP7 membrane containing 10 wt% of PSVP7 showed the best performance and the diffusion behaviour of this mixture through PVC and PVC/PCVP7 membranes has a Fickian behaviour. The pervaporation parameters of this membrane support those of the swelling and selective sorption data and reveal that this membrane could enhance the total flux without significantly affecting its selectivity to benzene.     

Yielding behaviour of thermoplastic/elastomer blends cured by gamma irradiation

Mechanical blends of thermoplastic medium density polyethylene (MDPE) and elastomeric ethylene propylene diene monomer (EPDM) have been prepared with a fixed composition of 60/40 wt%. They have been used either in their gum form or loaded with two different reinforcing fillers, high abrasion furnace (HAF) carbon black or precipitated SiO₂ (Hi Sil) of concentration 25–100 phr (parts per hundred parts of resin) with respect to the blend. Curing was achieved by gamma irradiation. Yielding properties (yield stress, yield strain and cold drawing) have been followed as a function of irradiation dose for different blend compositions. Yield stress values increased with irradiation dose and with the content of the reinforcing filler, but yield strain and cold drawing values decreased with irradiation dose and also with the filler content. The data obtained reveal that Hi Sil is more effective as a reinforcing filler, and the prepared blends are suitable for load‐bearing applications. © 2001 Society of Chemical Industry     

Study of the effects of structural uncertainties on a fractional system of the first kind – application in vibration isolation with the CRONE suspension

In this paper, we deal with the effects of the uncertainties on a fractional system of the first kind, mainly on the frequency-domain and the time-domain responses. For the structural uncertainties, two main aspects are studied: the nonlinearities of the physical components used to realize the fractional system and the consideration of the previously neglected dynamics of the system. Both uncertainties are introduced for the hydropneumatic CRONE suspension, previously synthesized and realized without taking into consideration these uncertainties. So, the novel approach treated in this work is to find whether the uncertainties, which were previously neglected in the synthesis and the realization phases, alter the behaviour of the system or not. The results show that the fractional order system behaviour is not affected.     

Inhibition of enterotoxicogenic strains Bacillus cereus GT1 and Staphylococcus aureus S1 isolated from double white cream cheese

In this study three different food preservatives (sodium nitrate, sodium benzoate and sodium sorbate) were used to evaluate their effect on two enterotoxicogenic strains (Bacillus cereus GT1 and Staphylococcus aureus S1). A significant decrease in the viability and production of virulence factors was observed. Yet, obvious tolerance to increasing concentrations (from 1 to 6?g/l) of the three preservatives was recorded reflecting possible resistance mechanisms within the tested strains. The two strains were subjected to increasing doses of gamma radiation (1, 2, 3, 4, 5, 6, 7, 8, 9 and 10?kGy). Obvious correlation was observed between the initial counts of bacterial spores contaminating the products and the required dose for their complete elimination. Whereas the eliminating dose of B. cereus GT1 strain was 10?kGy only 4?kGy was sufficient to suppress the growth and virulence of S. aureus S1, reflecting its sensitivity to low doses of gamma irradiation. Also, inhibition of the two strains by probiotic strain Bacillus pumilus G4 was studied both in situ (in cheese) and in vitro (in culture media). The viable cell population of B. cereus GT1 increased from 10⁶ to 2.9?×?10⁸?CFU/g within 60?h in controls but decreased from 2.1?×?10⁶ to 2.3?×?10³?CFU/g after treatment with the probiotic strain. No viable count was observed after 60?h of incubation. Whereas, the viable cell population of S. aureus S1 increased from 10⁶ to 2.5?×?10⁸?CFU/g within 60?h in controls but decreased from 1.5?×?10⁶ to 4.3?×?10²?CFU/g after treatment with the probiotic strain. No viable count was observed after 54?h of incubation.     

Monitoring of acrylamide carcinogen in selected heat-treated foods from Saudi Arabia

Food Science and Biotechnology - The present study reports the outcomes of assessment on acrylamide levels in selected heat-treated foods of diverse brands and origins from Saudi Arabia. In chips,...     

Knowledge driven robotics for kitting applications

This article presents a newly developed knowledge methodology/model that was designed to support the IEEE Robotics and Automation Society’s Ontologies for Robotics and Automation Working Group. This methodology/model allows for the creation of systems that demonstrate flexibility, agility, and the ability to be rapidly re-tasked. The methodology/model will be illustrated through a case study in the area of robotic kit building. Through this case study, the knowledge model will be presented, and automatic tools for optimizing the knowledge representation for planning systems and execution systems will be discussed.