Design sensitivities of fatigue performance and structural dynamic response in an automotive application

Direct accounting for durability rarely finds its way into multidisciplinary optimization. Though reduction of loads by some means can certainly have a beneficial influence on the fatigue performance of a structure, changes in load levels are not a direct measure of the influence of design changes on fatigue performance. In this paper, an assessment is made of an approach to the calculation of design sensitivities of a fatigue performance index namely, number of damaging cycles to failure. The approach makes use of analytical sensitivities of structural dynamic response, and a standard approach to the calculation of fatigue performance. The method is demonstrated using a simple nine degree-of-freedom structural model of an automobile in a conceptual representation of the industrial practice of road testing and road simulation. Results suggest that the estimates of changes in fatigue life are of sufficient quality for typical fatigue life evaluations, and open the door for the incorporation of a direct measure of fatigue performance in formal structural optimization. Received January 27, 2000 Communicated by J. Sobieski     

A multi-purpose Schrödinger-Poisson Solver for TCAD applications

We present the Vienna Schrödinger-Poisson Solver (VSP), a multi-purpose quantum mechanical solver for investigations on nano-scaled device structures. VSP includes a quantum mechanical solver for closed as well as open boundary problems on fairly arbitrary one-dimensional cross sections within the effective mass framework. For investigations on novel gate dielectrics VSP holds models for bulk and interface trap charges, and direct and trap assisted tunneling. Hetero-structured semiconductor devices, like resonant tunneling diodes (RTD), can be treated within the closed boundary model for quick estimation of resonant energy levels. The open boundary model allows evaluation of current voltage characteristics.     

Second generation (low modulus) titanium alloys in total hip arthroplasty

Titanium alloys ‐ type (α+β) ‐ like Ti6Al7Nb or Ti6Al4V are widely used in cementless total hip arthroplasty due to their lower modulus, biocompatibility and enhanced corrosion resistance in comparison to Stainless Steel or Cobalt‐Chromium implant materials. Several articles report about atrophy of the proximal femur in cases where long stems with a big diameter made of (α+β) Titanium alloys with a relatively high value of the Youngs’ Modulus (110 GPa) in comparison to the Youngs’ Modulus of cortical bone (15–25 GPa) have been implanted using a prosthesis design with distal anchorage technique. Meanwhile several implant manufacturers have developed a new group of biocompatible Beta‐Titanium alloys with a lower Youngs’ Modulus around 70 GPa. This article gives an overview of the current status of available low modulus Titanium alloys including their mechanical characteristics and future developments.     

Integration of beamforming and uncertainty-of-observation techniques for robust ASR in multi-source environments

This paper presents a new approach for increasing the robustness of multi-channel automatic speech recognition in noisy and reverberant multi-source environments. The proposed method uses uncertainty propagation techniques to dynamically compensate the speech features and the acoustic models for the observation uncertainty determined at the beamforming stage. We present and analyze two methods that allow integrating classical multi-channel signal processing approaches like delay and sum beamformers or Zelinski-type Wiener filters, with uncertainty-of-observation techniques like uncertainty decoding or modified imputation. An analysis of the results on the PASCAL-CHiME task shows that this approach consistently outperforms conventional beamformers with a minimal increase in computational complexity. The use of dynamic compensation based on observation uncertainty also outperforms conventional static adaptation with no need of adaptation data.     

Postictal nose wiping: a lateralizing sign in temporal lobe complex partial seizures

We report postictal nose wiping as a postictal symptom of localizing and lateralizing significance in focal epilepsy. We reviewed videotapes of 444 focal seizures in 101 patients who underwent prolonged video and EEG monitoring during presurgical epilepsy evaluation, and observed postictal nose wiping in 51.3% of 76 patients with temporal lobe epilepsy. The hand used to perform postictal nose wiping was ipsilateral to the side of seizure origin in 86.5% of all seizures and in 97.3% of all patients. We conclude that postictal nose wiping is a common, easily assessed symptom after focal seizures of temporal lobe origin that provides reliable lateralizing information on the side of seizure onset.     

Tissue localization of bovine dander allergen Bos d 2

We examined serum levels of a CD44 splice variant that contained variant exons 8-10 (CD44v8-10) as a tumor marker in colorectal cancer patients. We performed enzyme-linked immunosorbent assays in 81 sera obtained from 71 colorectal cancer patients and 10 healthy controls. Serum CD44v8-10 levels were significantly higher in the colorectal cancer patients than in the healthy controls (0.209 +/- 0.098 versus 0.114 +/- 0.019 OD; P < 0.01). There was a close correlation between immunohistochemical expression and serum CD44v8-10 levels. Surgical resection of the tumors resulted in a reduction of serum CD44v8-10 levels. There was no significant correlation between serum CD44v8-10 level and serosal invasion or histologic type. However, a significant correlation was observed between serum CD44v8-10 level and lymphatic or venous invasion. In addition, serum CD44v8-10 levels were significantly higher in carcinomas associated with lymph node or liver metastasis than in those without metastasis. These findings suggest the usefulness of serum CD44v8-10 level in the prediction of colorectal cancer metastasis.     

Integrated control/structure optimization by multilevel decomposition

A method for integrated control/structure optimization by multilevel decomposition is presented. It is shown that several previously reported methods were actually partial decompositions wherein only the control was decomposed into a subsystem design. One of these partially decomposed problems was selected as a benchmark example for comparison. The presented paper fully decomposes the system into structural and control subsystem designs and produces an improved design. Theory, implementation, and results for the method are presented and compared with the benchmark example.     

Flow and compartmental weight in relation to the cours of stroke

Using a scintillation camera system, hemispheric and regional cerebral blood flow was measured repeatedly during the course after a stroke. In 20 patients who improved clinically mean hemispheric and regional flow and relative weight of rapidly perfused compartment increased, while these values decreased in 15 patients, on an average, whose clinical condition deteriorated or did not change. The changes of flow and relative weight were significantly different between the two groups. Futhermore, the relationship between changes in clinical condition, scored according to a rating scale, and changes in flow and compartmental weight was proved by significant Spearman rank correlation coefficients. In six cases hyperperfused areas in locations of disturbed neurological function were observed; these areas were found to be ischemic at measurements done early and late in the cours after the stroke. This type of hyperperfusion was related to beneficial prognosis. The results indicate a shift of tissue form fast to slowly cleared compartment after a cerebrovascular attack. If tissue morphology is not entirely destroyed, recovery might occur; this results in an increase of recorded weight of rapidly clearing compartments, which correlates to the clinical course.     

Indications and technique of bone cutting

For cutting bones different tools and techniques are available. The question which method is most advantageous depends on the basic surgical concept, the location of the bone cut and the choice of the subsequent implant. The biological activity of the anatomical site of the cut determines how much the tissue needs to be protected, taking into consideration the vascularity of the bone and avoiding heat transfer. The surgical approach depends on the implant and should be used also for the bone cut. Specific indications are given for the oscillating saw, the Gigli saw, the osteotome, drill holes and the medullary saw.     

Second-Generation Meridianin Analogues Inhibit the Formation of Mycobacterium smegmatis Biofilms and Sensitize Polymyxin-Resistant Gram-Negative Bacteria to Colistin

Drug-resistant bacteria are rapidly becoming a significant problem across the globe. One element that factors into this crisis is the role played by bacterial biofilms in the recalcitrance of some infections to the effects of conventional antibiotics. Bacteria within a biofilm are highly tolerant of both antibiotic treatment and host immune responses. Biofilms are implicated in many chronic infections, including tuberculosis, in which they can act as bacterial reservoirs, requiring an arduous antibiotic regimen to eradicate the infection. A separate, compounding problem is that antibiotics once seen as last-resort drugs, such as the polymyxin colistin, are now seeing more frequent usage as resistance to front-line drugs in Gram-negative bacteria becomes more prevalent. The increased use of such antibiotics inevitably leads to an increased frequency of resistance. Drugs that inhibit biofilms and/or act as adjuvants to overcome resistance to existing antibiotics will potentially be an important component of future approaches to antibacterial treatment. We have previously demonstrated that analogues of the meridianin natural product family possess adjuvant and antibiofilm activities. In this study, we explore structural variation of the lead molecule from previous studies, and identify compounds showing both improved biofilm inhibition potency and synergy with colistin.