Synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone) grafted sodium alginate hydrogel beads for the controlled release of indomethacin

Graft copolymers of sodium alginate (NaAlg) with N‐vinyl‐2‐pyrrolidone were prepared using azobisisobutyronitrile as initiator. The graft copolymers (NaAlg‐g‐PVP) were characterized with Fourier transform infrared spectroscopy, elemental analysis, and differential scanning calorimetry. Polymeric hydrogel beads of NaAlg and NaAlg‐g‐PVP were prepared by crosslinking method using glutaraldehyde (GA) as a crosslinker in the hydrochloric acid catalyst (HCl) and these beads were used to deliver anti‐inflammatory drug, indomethacin (IM). Chemical stability of the IM after encapsulation into beads was confirmed by FTIR. Preparation conditions of the NaAlg‐g‐PVP beads were optimized by considering the percentage entrapment efficiency, particle size, swelling capacity and their release data. In vitro release studies were performed in simulated gastric fluid (pH 1.2) for the initial 2 h, followed by simulated intestinal fluid (pH 7.4) for 4 h. Effects of GA concentration, exposure time to GA, drug/polymer (d/p) ratio, and concentration of HCl on the release of IM were discussed. It was observed that IM release from the beads decreased with increasing GA concentration and exposure time. IM release also decreases with increasing d/p ratio and HCl concentration. The highest IM release was obtained to be 77% for beads crosslinked with 0.027M GA. Swelling experiments were also performed to compute molecular mass between crosslinks of the beads. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Joint forecasts of Dow Jones stocks under general multivariate loss function

When forecasts are assessed by a general loss (cost-of-error) function, the optimal point forecast is, in general, not the conditional mean, and depends on the conditional volatility—which, for stock returns, is time-varying. In order to provide forecasts of daily returns of 30 DJIA stocks under a general multivariate loss function, the following issues are addressed. We discuss what conditions define a multivariate loss function, and a simple class of such functions is proposed. Based on suitable combinations of univariate losses, the suggested multivariate functions are convenient for practical applications with many variables. To keep the computational aspect tractable, a flexible multivariate GARCH model is employed in estimating the conditional forecast distributions. The model easily copes with large number of series while allowing for skewness, fat tails, non-ellipticity, and tail dependence. Based on Engle’s DCC GARCH, it uses multivariate affine generalized hyperbolic distributions as conditional probability law, and the number of parameters to be estimated simultaneously does not depend on the number of series. The model is fitted using daily data from 2002 to 2007 (keeping data from 2008 for out-of-sample forecasts), and a bootstrap procedure is used to derive point forecasts under several multivariate loss functions of the proposed type.     

Time-averaged behaviour of single and dual flying capacitor converters

The Single Flying Capacitor Converter (SFCC) and Dual Flying Capacitor Converter (DFCC) are two-quadrant power supplies for energy storage and transfer systems. They have applications in nuclear research and pulsed power systems in which superconductive coils are used. In this paper analytical expressions for the time-averaged behaviours of SFCC and DFCC are derived by using averaging technique. Because large superconductive magnet coils are used, time constants of the switched circuits are large enough compared to the switching period. Therefore, an averaged PWM switch equivalent circuit is substituted into the original converter circuits to find the averaged system equations. With this new insight in the averaged dynamics, their design and control can be optimized. Although DFCC has less coil current ripple compared to SFCC, the analysis will show that the averaged behaviours of both converters are the same.     

Performance analysis of dual-hop fixed-gain AF relaying systems with OSTBC over Nakagami-m fading channels

In this paper, we present outage probability and symbol error rate (SER) performance analyses of a dual-hop transmission using fixed-gain amplify-and-forward relaying in flat Nakagami-m fading channels. The system under consideration is equipped with multiple antennas at source and destination adopting orthogonal space-time block coding to provide transmit diversity and maximum ratio combining to provide receive diversity, respectively. For integer and half-integer m values, closed forms of exact outage probability and moment generating function (MGF) expressions are derived through cumulative distribution function (CDF) of the overall system signal-to-noise ratio. Closed-form exact SER expressions based on the overall CDF are obtained for binary phase shift keying, binary frequency shift keying and M-ary pulse amplitude modulation. Exact SER expressions based on the MGF method are also obtained for binary differential phase shift keying, M-ary phase shift keying and M-ary quadrature amplitude modulation. Moreover, the asymptotic diversity order analysis is performed through derivations of asymptotic outage probability and SER. Theoretical analyses are validated by Monte Carlo simulations showing perfect match between each other.     

Infrared drying of button mushroom slices

The effect of different infrared power levels on the drying kinetics of button mushrooms was investigated. Mushroom slices were dried at infrared power levels of 83, 125, 167, and 209 W. The power level affected the drying and rehydration characteristics of mushroom slices. Drying time was reduced from 300 min to 40 min as the infrared power level increased from 83 to 209W. Mathematical models frequently used to represent drying of agricultural products were fitted to experimental data of mushroom drying. The parabolic model was the best for representation of mushroom drying. Effective moisture diffusivity varied from 3.81×10^?10 to 4.20×10^?9 m²/s over the infrared power levels used. The activation energy was estimated using a modified Arrhenius-type equation and calculated to be 7.55 kW/kg.     

Synthesis and evaluation of tetra(2,7-octadienyl) titanate as a reactive diluent for air-drying alkyd paints

Environmental regulations are forcing the reformulation of many decorative and protective coatings systems. In particular, air-drying solventborne alkyd paints need to meet increasingly stringent emission limits and often must be reformulated with suitable exempt solvents or reactive diluents to achieve volatile organic compound (VOC) reduction. In the research summarized in this article, a new reactive diluent, tetra(2,7-octadienyl) titanate, was synthesized and evaluated in alkyd formulations for VOC reduction and property enhancement. A soy-based long-oil alkyd resin; a soy-based high-solids, long-oil alkyd resin; and a linseed-based, high-solids long-oil alkyd resin were evaluated in combination with the new reactive diluent at weight percentages ranging from 10% to 50%. Characterization included measuring viscosity, film dry times, and film performance of the reactive diluent formulations in comparison to neat alkyd resins used as control. The tetra(2,7-octadienyl) titanate formulations consistently exhibited reduced viscosities and dry times as a function of concentration. The resulting films were harder and more thoroughly cured than the control systems.     

Optimization of some parameters of stirred mill for ultra-fine grinding of refractory Au/Ag ores

In this study, optimization of some parameters of stirred mill on ultra-fine grinding of refractory Au/Ag ores was performed. A three-level Box-Behnken design combining a response surface methodology (RSM) with quadratic programming (QP) was employed for modelling and optimization of some operating parameters in ultra-fine grinding. Grinding tests were carried out in a laboratory scale pin-type vertical stirred mill. The relationship between the response, i.e. d₈₀ size, and four grinding parameters, i.e. ball diameter, grinding time, ball charge ratio and stirrer revolution was presented as empirical model equations. Analysis of variance showed a high coefficient of determination value (R² = 0.9698), thus ensuring a satisfactory of the second-order regression model with the experimental data.The model equations were then optimized using the quadratic programming method to minimize for d₈₀ size within the experimental range studied. The optimum conditions were found to be 1.61 mm for ball diameter, 11.50 min for grinding time, 80% for ball charge ratio and 745 rpm for stirrer revolution for this grinding process.In order to verify the improvement of grinding performance using the optimal level of control factors three verification experiments were conducted, and the results for d₈₀ was 3.37 μm, which were smaller than those obtained in the initial tests.     

Synthesis and characterization of novel poly(dimethylsiloxane)/polyindole composites

A series of composites of polyindole (PIN) and poly(dimethylsiloxane) (PDMS) were synthesized chemically using FeCl₃ as an oxidant agent in anhydrous media. The composites were characterized by FTIR and UV‐visible spectroscopies, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X‐ray diffraction (XRD), elemental analysis, inductively coupled plasma‐optic emission spectroscopy (ICP‐OES), magnetic susceptibility, stress–strain experiments, and conductivity measurements. The conductivities of PIN at different temperatures were also measured and it was revealed that their conductivities were slightly increased with increasing temperature. Moreover, the freestanding films of PDMS/PIN composites were prepared by casting on glass Petri dishes to examine their stress–strain properties. From thermogravimetric analysis results it was found that PDMS/PIN composites were thermally more stable than PIN. Thermal stabilities of PDMS/PIN composites increased with increasing PIN content. It was found that the conductivities of PDMS/PIN composites depend on the indole content in the composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, thermal stability,conductivity, and band gap of a new aromatic polyether containing an azomethine as a side

In this study, the oxidative polycondensation reaction conditions of 4‐[(4‐methylphenyl)iminomethyl]phenol (4‐MPIMP) were studied by using oxidants such as air O₂, H₂O₂, and NaOCl in an aqueous alkaline medium between 50 and 90°C. The structures of the synthesized monomer and polymer were confirmed by FTIR, UV–vis, ¹H–¹³C‐NMR, and elemental analysis. The characterization was made by TGA‐DTA, size exclusion chromatography (SEC), and solubility tests. At the optimum reaction conditions, the yield of poly‐4‐[(4‐methylphenyl)iminomethyl]phenol (P‐4‐MPIMP) was found to be 28% for air O₂ oxidant, 42% for H₂O₂ oxidant, and 62% for NaOCl oxidant. According to the SEC analysis, the number–average molecular weight (M_n), weight–average molecular weight (M_w), and polydispersity index values of P‐4‐MPIMP were found to be 4400 g mol^?1, 5100 g mol^?1, and 1.159, using H₂O₂, and 4650 g mol^?1, 5200 g mol^?1, and 1.118, using air O₂, and 5100 g mol^?1, 5900 g mol^?1, and 1.157, using NaOCl, respectively. According to TG analysis, the weight losses of 4‐MPIMP and P‐4‐MPIMP were found to be 85.37% and 72.19% at 1000°C, respectively. P‐4‐MPIMP showed higher stability against thermal decomposition. Also, electrical conductivity of the P‐4‐MPIMP was measured, showing that the polymer is a typical semiconductor. The highest occupied molecular orbital and the lowest unoccupied molecular orbital energy levels and electrochemical energy gaps (E) of 4‐MPIMP and P‐4‐MPIMP were found to be ?5.76, ?5.19; ?3.00, ?3.24; 2.76 and 1.95 eV, respectively. According to UV–vis measurements, optical band gaps (E_g) of 4‐MPIMP and P‐4‐MPIMP were found to be 3.34 and 2.82 eV, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007