The Inflammatory Profile of Obesity and the Role on Pulmonary Bacterial and Viral Infections

Obesity is a globally increasing health problem, entailing diverse comorbidities such as infectious diseases. An obese weight status has marked effects on lung function that can be attributed to mechanical dysfunctions. Moreover, the alterations of adipocyte-derived signal mediators strongly influence the regulation of inflammation, resulting in chronic low-grade inflammation. Our review summarizes the known effects regarding pulmonary bacterial and viral infections. For this, we discuss model systems that allow mechanistic investigation of the interplay between obesity and lung infections. Overall, obesity gives rise to a higher susceptibility to infectious pathogens, but the pathogenetic process is not clearly defined. Whereas, viral infections often show a more severe course in obese patients, the same patients seem to have a survival benefit during bacterial infections. In particular, we summarize the main mechanical impairments in the pulmonary tract caused by obesity. Moreover, we outline the main secretory changes within the expanded adipose tissue mass, resulting in chronic low-grade inflammation. Finally, we connect these altered host factors to the influence of obesity on the development of lung infection by summarizing observations from clinical and experimental data.     

A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Squeeze casting and powder metallurgy techniques were employed to fabricate AlSi12/Al₂O₃ composites, which are lightweight structural materials with potential applications in the automotive industry. The impact of the processing route on the material properties was studied. Comparative analyses were conducted for the Vickers hardness, flexural strength, fracture toughness, thermal conductivity, thermal residual stresses, and frictional wear. Our results show that the squeeze cast composite exhibits superior properties to those obtained using powder metallurgy.

     

The seismic source parameters of tremors provoked by destress blastings in coal seam

Underground mining of coal seams in the Upper Silesian Coal Basin is currently being carried out under difficult geological and mining conditions. Rockburst hazard can be minimized via the use of active rockburst prevention, where destress blastings take an important role, especially during mining under disadvantageous geological and mining conditions. Presented paper shows how seismic source parameters may be useful to study destress blastings effects. Destress blastings were performed in coal seam no. 510 during longwall mining of coal seam no. 510 in one of the coal mines in the Upper Silesian Coal Basin. The presented preliminary investigations have given possibility for rapid estimation of destress blasting effectiveness with the use of seismic source parameters, but further analysis under other geological and mining conditions and other blasting parameters is needed.     

Effect of Tempering and Strain on Decomposition of Metastable Austenite in X210CrW12 Thixo-Cast Steel

Thixoforming of hot rolled X210CrW12tool steel led to the formation of globular austenitic grains (82.4 vol.%) surrounded by eutectic mixture (α-Fe and M₇C₃ carbides). The thixo-cast steel reached compression strength 4.8 GPa at plastic strain 34%. The analysis of pole figures after deformation indicated distinct texturization of microstructure in comparison with undeformed steel. Main texture components for austenite were {101}, 〈010〉, while ferrite did not reveal clearly formed orientation. DSC analysis confirmed that austenitic structure in the X210CrW12 steel was metastable and temperature of decomposition depended on the strain applied at 634 °C for the un-deformed sample and at 599 °C for sample compressed up to 4.8 GPa. Discontinuous transformation of austenite into perlite, that started mainly at grain boundaries and proceeded to the center, was the predominant mechanism responsible for the decomposition of globular grains in thixoformed X210CrW12 steel. The decomposition caused by tempering of supersaturated and severely strained steel led to obtaining characteristic product of transformation of higher hardness in comparison with only tempered sample. In the deformed sample the reaction started on slip bands and twins which revealed high density of defects, promoting precipitation of carbides, followed by local depletion in carbon as a result of α′- Fe formation. In contrast to non-deformed state they covered the area of grains. Two fronts of reaction α-Fe plate +M₃C → mixture of α-Fe and M₇C₃ carbides were also observed.     

Effects of damming a large lowland river on chironomids and fish assessed with the (multiplicative partitioning of) true/Hill biodiversity measure

The impact of a large lowland temperate zone reservoir on chironomid and fish biodiversity was investigated in the same upstream (U) and downstream (D) sites on the same sampling occasions in spring and autumn of several post‐impoundment years. The true/Hill N1 diversity measure was used to construct diversity models of the impact, and partitioning of N1 to reveal the importance of ecological gradients. N1 is unique in being decomposable among multiple levels and easily comparable across ecosystems and animal groups. Chironomids were more diverse than fish in all community sets owing to their probably lower mobility, lower interspecific competition, opportunistic character and much shorter life spans than those of fish. Fish exerted consumption pressure on chironomids upstream by foraging mostly on benthic insects, but not downstream where they fed on microcrustaceans of reservoir origin or on epiphytic fauna (mainly Chironomidae). The reservoir impact on chironomids decreased their diversity in U and increased in D, while much the opposite was true in fish. In D in macroinvertebrates, the impact consisted in advancing over time intensification of seasonal development of submersed macrophytes, while in D in fish in a few species escaping from the reservoir after their populational explosions each year. Partitioning of diversity revealed that the spatial (upstream–downstream) gradient was the strongest factor of diversity change in chironomids as compared with season, and age of the impoundment. No gradient was dominant in fish. Comparisons of observed data with a null model testified to very strong intraspecific aggregation in both chironomids and fish. Copyright © 2010 John Wiley & Sons, Ltd.     

Novel adhesive system based on 1,3-dimethylol-4,5-dihydroxyethyleneurea (DMDHEU) and hyperbranched polyglycerols

Two hyperbranched polyglycerols bearing 1,1,1-tris(hydroxymethyl)propane or Bisphenol A core and terminal hydroxyl functionality were examined as components of novel wood adhesive systems. Two 1,3-dimethylol-4,5-dihydroxyethyleneurea resins (DMDHEU) were used as crosslinkers. Shear strength tests revealed that the adhesives containing up to 75 wt% of renewable glycerol-derived polyglycerols retained performance comparable to that of neat DMDHEU. The results give way to extending the area of application of hyperbranched polyglycerols in the field of wood adhesives.     

Identification of Mg<Subscript>2</Subscript>Cu particles in Cu-alloyed austempered ductile iron

In the present work, the Mg₂Cu precipitates in copper-alloyed austempered ductile iron (ADI) were identified by analyzing techniques such as TEM and SEM with EDS. It was revealed that, in castings made of ADI-containing copper, highly dispersed particles of Mg₂Cu are formed, whose size does not exceed <1 μm. The research work was carried out on ductile iron that was austenitized at 900 °C, followed by austempering at 380 °C. The microstructure was investigated using various techniques, including optical microscopy, XRD, SEM, and TEM. In addition to this, the exhibited impact properties of castings with Cu, Ni, and Cu+Ni were also determined. This study casts a new light on the formation of the structure of Cu-alloyed ADI. The highly-dispersive and brittle Mg₂Cu particles that are located in the vicinity of the graphite nodules have a negative effect on the impact properties of ADI. It has also been shown that impact strength decreases from levels of 160-180 J (for copper-free ADI) to 90-120 J (for copper-and copper-nickel-alloyed ADI).     

Correction to: A Comparative Study of Mechanical Properties,Thermal Conductivity,Residual Stresses,and Wear Resistance of Aluminum-Alumina Composites Obtained by Squeeze Casting and Powder Metallurgy

Metallurgical and Materials Transactions A -     

Melt-spinning and semi-solid processing of bainitic steel

A steel with a chemical composition meant to form nanostructured bainite following appropriate heat treatment, was, cooled rapidly from the liquid phase (1550°C) using melt spinning and modified injection-suction methods, as well as from a semi-solid temperature (1430°C) through thixoforming. The hardness of the as-cast melt spun ribbons was ～960?HV due to a fine martensite–austenite mixture surrounded by three-dimensional skeleton-like primary carbides of length scale 0.2–0.3?µm. The suction-injection cast method led to a similar structure but less hard (780?HV) due to a lower cooling rate. The thixoformed material showed unmelted globular, fine grains and a fine eutectic mixture formed directly from the liquid phase. The variety of processed steel samples were tempered and their microstructures, examined.