Electrochemical mass transfer between an impinging jet and a rotating disk in a confined system

This paper presents the mass transfer results from an impinging liquid jet to a rotating disk. The mass transfer coefficients were measured using the electrochemical limiting diffusion current technique (ELDCT). Rotational Reynolds number (Re_r) in the range of 3.4 × 10⁴–1.2 × 10⁵, jet Reynolds number (Re_j) 1.7 × 10⁴–5.3 × 10⁴ and non-dimensional jet-to-disk spacing (H/d) 2–8 were taken into consideration as parameters. It was found that the jet impingement resulted in a substantial enhancement in the mass transfer compared to the case of the rotating disk without jet.     

Effect of biochemical storage on the denitrification potential of acetate in sequencing batch reactors.

This study evaluates the effect biochemical storage on the denitrification potential (N(DP)) of acetate. The fate of bacterial storage is evaluated in a sequencing batch reactor system operated in a sequence of anoxic/aerobic phases, fed with acetate as a pulse and continuously under anoxic conditions. N(DP) is defined based on system stoichiometry both for direct growth and storage on acetate. Experimental results do not support conceptual calculations based on system stoichiometry, yielding a higher denitrification potential, N(DP), for continuous feeding than the N(DP) obtained with pulse feeding, due to partial utilisation of the stored PHB within the anoxic phase. The nitrate, acetate and poly-beta-hydroxybutyrate (PHB) profiles obtained in the experimental studies were used in model calibrations for two different feeding patterns. Results of model simulations confirm the experimental results and evaluate the effects imposed on the denitrification potential by sludge age and the anoxic volume ratio.     

Locational analysis for regionalization of Turkish Red Crescent blood services

After a series of earthquakes in 1999, Turkish Red Crescent (TRC) has engaged in a restructuring for all of its activities, including the blood services. Our study on the blood management system had been started as part of this initiative to restructure the blood services and improve both their effectiveness and efficiency. In the current system of TRC, not much consideration has been given to how the locational decisions affect the performance of blood centers, stations and mobile units. In recent years, however, there has been much discussion regarding the regionalization of the blood management system in Turkey. In this study, we develop several mathematical models to solve the location–allocation decision problems in regionalization of blood services. We report our computational results, obtained by using real data, for TRC blood services.     

Prediction of software vulnerability based deep symbiotic genetic algorithms: Phenotyping of dominant-features

The detection of software vulnerabilities is considered a vital problem in the software security area for a long time. Nowadays, it is challenging to manage software security due to its increased complexity and diversity. So, vulnerability detection applications play a significant part in software development and maintenance. The ability of the forecasting techniques in vulnerability detection is still weak. Thus, one of the efficient defining features methods that have been used to determine the software vulnerabilities is the metaheuristic optimization methods. This paper proposes a novel software vulnerability prediction model based on using a deep learning method and SYMbiotic Genetic algorithm. We are first to apply Diploid Genetic algorithms with deep learning networks on software vulnerability prediction to the best of our knowledge. In this proposed method, a deep SYMbiotic-based genetic algorithm model (DNN-SYMbiotic GAs) is used by learning the phenotyping of dominant-features for software vulnerability prediction problems. The proposed method aimed at increasing the detection abilities of vulnerability patterns with vulnerable components in the software. Comprehensive experiments are conducted on several benchmark datasets; these datasets are taken from Drupal, Moodle, and PHPMyAdmin projects. The obtained results revealed that the proposed method (DNN-SYMbiotic GAs) enhanced vulnerability prediction, which reflects improving software quality prediction.

     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.     

Corrosion inhibition of stainless steel by polyaniline,poly(2-chloroaniline), and poly(aniline-co-2-chloroaniline) in HCl

Polyaniline (PANi), poly(2-chloroaniline) (PClANi), and poly(aniline-co-2-chloroaniline) (co-PClANi) films were synthesized by electrochemical deposition on 304-stainless steel (SS) from an acetonitrile solution. The structural properties of these polymer films were characterized by spectroscopic (FTIR and UV–vis) and electrochemical (cyclic voltammetry) methods. Open circuit potential–time (E_ocp–time) curves, potentiodynamic polarization, and electrochemical impedance (EIS) measurements showed that these films have significant protective performance against corrosion of SS in 0.5 M HCl solution. It was found that co-PClANi film has acted as a passivator as well as barrier for cathodic reduction reaction in a similar manner as PANi film. However, PClANi film has behaved only as barrier for corrosion protection of SS in 0.5 M HCl.     

Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model

This paper is the first one of the two papers entitled “modeling and solving mixed-model assembly line balancing problem with setups”, which has the aim of developing the mathematical programming formulation of the problem and solving it with a hybrid meta-heuristic approach. In this current part, a mixed-integer linear mathematical programming (MILP) model for mixed-model assembly line balancing problem with setups is developed. The proposed MILP model considers some particular features of the real world problems such as parallel workstations, zoning constraints, and sequence dependent setup times between tasks, which is an actual framework in assembly line balancing problems. The main endeavor of Part-I is to formulate the sequence dependent setup times between tasks in type-I mixed-model assembly line balancing problem. The proposed model considers the setups between the tasks of the same model and the setups because of the model switches in any workstation. The capability of our MILP is tested through a set of computational experiments. Part-II tackles the problem with a multiple colony hybrid bees algorithm. A set of computational experiments is also carried out for the proposed approach in Part-II.     

Prioritized Mobile Robot Exploration Based on Percolation Enhanced Entropy Based Fast SLAM

The major aim in search and rescue using mobile robots is to detect and reach trapped survivors and to support rescue operations through disaster environments. Our motivation is based on the fact that a search and rescue (SAR) robot can navigate within and penetrate a disaster area only if the area in question possesses connected voids. Traversability or penetrability of a disaster area is a primary factor that guides the navigation of a search and rescue (SAR) robot, since it is highly desirable that the robot, without hitting a dead end or getting stuck, keeps its mobility for its primary task of reconnaissance and mapping when searching the highly unstructured environment. We propose a novel percolation guidance that collaborates with entropy based SLAM under a switching control setting the priority to either position or map accuracy. This newly developed methodology has proven to combine the superiority of both percolator guidance and entropy based prioritization so that the active SLAM becomes speedy, with high coverage rate of the area as well as increased accuracy in localization. Our percolator guidance stems from a frontier based conditioning of a-posteriori occurrences of upcoming connected voids that uses the fact that every obstacle partially seen at the frontier of the explored domain has a spatial continuity into the unexplored area. The developed modular architecture is introduced in details and demonstrative examples are provided and discussed.     

Activities of MFI-Supported Rhenium Catalysts for the Aromatization of Methane: Effect of Cationic Form of the Inorganic Carrier

MFI type inorganic carrier was used in two different cationic forms, hydrogen and calcium respectively. MFI-supported molybdenum and rhenium catalysts were prepared. The activities of the catalysts were compared for the aromatization reaction of methane. Higher activity values were attained with the catalysts supported on HZSM-5. Aromatics were also observed with the catalysts supported on CaZSM-5, despite their deficiency in acid sites. Highly dispersed rhenium is expected to be formed with the use of the inorganic carrier in calcium form. On the other hand, lower reaction rates were observed with rhenium supported on CaZSM-5, in spite of the improved dispersion of the active rhenium species on this catalyst. This was interpreted in terms of the critical role of the acid sites in the conversion of methane to aromatics, compared to the improved dispersion of the active metal.