排序方式: 共有10条查询结果,搜索用时 943 毫秒
1
1.
低冲击火工解锁螺栓的内弹道特性分析 总被引:1,自引:0,他引:1
为适应高速导弹级间分离系统的需要,设计了一种楔块式火工解锁螺栓,建立了其作用过程的内弹道模型并进行了仿真计算;通过试验测试了这种连接分离机构腔内燃气压力-时间曲线、分离体内筒的位移-时间曲线以及其他性能参数,得到了其分离时间为14.60 ms,分离冲量为1.667 N.s,冲击加速度为3 932g,最大拉伸承载力为21.1 kN.试验结果与内弹道模型仿真结果和试验结果基本一致,均可反映楔块式火工解锁螺栓的分离运动特性. 相似文献
2.
1,顶棚抹灰存在的问题
工程竣工后,经常出现顶棚抹灰空鼓、开裂、爆灰,甚至出现顶棚抹灰脱落伤人现象。主要原因有以下几个方面: 相似文献
3.
The thermal stability of normal lead styphnate (N-LTNR) has been studied under severe temperature (-70℃ -130℃ for 5 days) with a high optical microscope and camera were used to observe apparent morphology and thermal gravimetric analysis was applied to study the physical changes. In addition, vacuum stability analysis, differential scanning calorimetry(DSC), thermal gravimetric analysis(TGA) and purity analysis were utilized to study the chemical changes. As well as flame sensitivity analysis were used to investigated the explosive changes. The results show that N-LTNR has good chemical stability and fire function stability between -70℃ and 130℃, but poor physical stability. When the temperature was exceeded than 110℃, the N-LTNR lost crystal water which made the energetic material become darker in color, lager in volume and lighter in weight (3.416%) when the temperature was below -40℃, the phenomenon of crystal broking and jumping happened. 相似文献
4.
5.
基于SCB(半导体桥)点火技术,设计了一种轴向长度为64mm、径向最大直径为16mm的新型火工解锁机构,并通过拉伸承载力、分离时间与同步性等性能试验,测得其极限承载力不小于20kN、分离时间略大于1ms、同步性为0.126ms,且分离时无烟雾泄漏现象.试验结果表明本文设计的火工解锁机构具有结构尺寸小、分离时间短、同步性... 相似文献
6.
In order to study the detonation velocity deficits of bending flexible detonating fuses,a physical model and a theoretical mathematical equation of detonation velocity deficits for bending flexible det... 相似文献
7.
8.
对一种为高速导弹设计的楔块式火工分离机构的薄弱环节进行了受力分析与强度校核,基于失效分析方法得到内筒螺纹段是影响分离机构总体载荷强度的关键,其最大承载力为21.6kN;通过对该机构进行分离能力与承载力试验,得到其分离时间为1.2ms左右,平均最大承载力为21kN左右。试验表明理论强度校核方法能准确估算出机构的最大承载力,可为类似航天器火工装置的设计提供有益参考。 相似文献
9.
为准确预示反推式分离螺母各运动组件的分离行为,建立考虑多种火药燃烧、热散失、密封圈摩擦力、内部机构多阶段运动的数学模型。模型模拟得到的腔内压力等分离特性参量与实测值相吻合。与忽略热散失与密封圈摩擦力的模型预测结果相比,该模型对腔内压力等参量的预测结果更接近实测值,可避免腔内峰值压力33%、内套筒峰值速度47%的过预示。使用建立的模型分析装药量对分离特性的影响规律。分析结果表明:采用新模型可适当增加药盒装药量,大幅减少快燃速Al/KClO4药量,有利于提高分离可靠性、降低分离冲击。 相似文献
10.
降低火工解锁螺栓分离冲击的技术研究 总被引:1,自引:0,他引:1
为了使火工解锁螺栓在分离过程中产生的分离冲击降到最小,对一种典型的火工解锁螺栓工作原理进行分析,确定了影响分离冲击的关键因素为分离部件的质量和起爆器装药量;并通过结构尺寸优化和起爆器装药小量化两种技术途径,分别使分离部件的质量从83g减小到17g,起爆器装药量从45mg减小到35mg.极限承载力与分离冲击试验结果表明:... 相似文献
1