排序方式: 共有38条查询结果,搜索用时 312 毫秒
1.
2.
3.
在试验的基础上建立了打击力测量的二阶动力学模型,不仅考虑了测力传感器的动态特性,而且考虑了被测机械系统的动态特性,并且上机进行了计算机模拟试验,探讨了打击力测量中存在的问题。 相似文献
4.
5.
Porous SiO2-Si3N4 composite ceramics with high porosity and excellent mechanical properties were fabricated by pressureless-sintering at relatively low temperature of 1 500 °C using diatomite as pore forming agent. The effects of diatomite on flexural strength, fracture toughness, shrinkage, porosity and phase transformation of the porous ceramics were investigated in detail. Compared with that of the ceramic without adding diatomite, the porosity of the ceramic with 10% diatomite is increased by about 27.4%, the flexural strength and fracture toughness reaches 78.04 MPa and 1.25 MPa·m1/2, respectively. As the porosity increases, the dielectric constant of porous SiO2-Si3N4 ceramic decreases obviously from 3.65 to 2.95. 相似文献
6.
7.
磁性材料的研究和发展趋势 总被引:2,自引:0,他引:2
介绍了磁性材料的种类和发展过程,并在此基础上阐述了磁性材料的研究进展、性能及应用,展望了其发展趋势和今后的研究开发的重点. 相似文献
8.
9.
等径角挤压2A12铝合金超细晶组织结构研究 总被引:5,自引:7,他引:5
使用Φ=90°和ψ=30°的挤压模具在室温下对2A12铝合金进行了8次等径角挤压,成功制备了晶粒尺寸为200nm左右、具有大角度晶界的块体超细晶材料,并且采用HitachiS-800透射电镜,研究了挤压过程中2A12铝合金的组织结构及其变化。结果表明挤压一次后,晶粒内位错密度急剧增加,形成位错纠缠,晶粒细化效果最明显;挤压前分布在α-Al基体上的针状第二相Al2Cu和颗粒状Al2Cu Mg,在剪切力的作用下,针状Al2Cu变成颗粒状,弥散分布在α-Al基体上,Al2CuMg颗粒因晶粒细化进入了晶界位置,而且在以后的挤压中,这些化合物颗粒大小基本保持不变。继续挤压,位错逐渐由晶内移动到晶界上,在晶界上形成胞状组织,最后逐渐变成了清晰的小角度晶界或大角度晶界,从而实现组织的超细化。 相似文献
10.
等径角挤压法制备块体超细晶材料的研究现状及展望 总被引:5,自引:0,他引:5
对块体超细晶材料的研究是近年来的一大热点.大塑性变形法(Sever Plastic Deformation,SPD)之一的等径角挤压(Eaqual channel angular pressing ,ECAP)法,可以在室温或不太高的温度下,将材料的晶粒由几微米至几十微米细化至200nm~400nm,材料的性能得到提高,并且ECAP法有着相对简单的制备工艺及较好的细化效果.本文介绍了ECAP处理对提高材料的强度、疲劳寿命、超塑性等的贡献以及影响ECAP工艺的因素,分析了ECAP目前存在的问题,并对ECAP的应用前景进行了展望. 相似文献