排序方式: 共有15条查询结果,搜索用时 15 毫秒
1.
低成本YSZ电解质膜管的制备和性能研究 总被引:3,自引:0,他引:3
用真空注浆法制备出膜厚为0.2mm的8mol%YSZ电解质膜管,用排水法、SEM和复阻抗等分析手段研究了YSZ电解质膜管烧结密度、表面形貌及其电导性能,确定了可使YSZ电解质膜管获得最佳烧结性能的烧结温度。研究结果表明,真空注浆法是一种制备高烧结性能YSZ电解质膜管的简单方法。用这一方法已制备出相对密度为98.1%、长度为254mm的致密YSZ电解质膜管,其烧结温度范围比传统注浆法制备YSZ电解质管降低了190~200℃。研究还表明,随烧结温度升高,样品致密度增大,导电性能也逐渐提高。经1600℃烧结2h样品的烧结密度和导电性能均达到最佳值;进一步提高烧结温度,样品的致密度和电学性能均有所下降。 相似文献
2.
3.
5月12日下午14∶28分,四川省汶川县发生8.0级特大地震,德阳市距震中仅80余公里,突如其来的特大地震,给我市经济和人民生命财产造成了巨大损失。到目前为止,我市死亡17076人,伤68878人,直接经济损失达2000多亿元,间接经济损失达7000亿元。巨大的灾害,没有吓倒德阳的无线电管理工作者,我们第一时间奔赴灾区慰问受灾群众, 相似文献
4.
5.
6.
YSZ-Al2O3电解质膜管制备及其应用 总被引:3,自引:2,他引:1
以吡啶为分散剂,采用真空注浆法制备出膜厚为0.2 mm、长度为35 mm的致密YSZ-Al2O3电解质膜管,研究了烧结温度对样品致密度和离子电导率的影响,确定了获得电解质膜管综合性能的最佳烧结温度范围。用1 650 ℃烧结2 h制备的致密YSZ-Al2O3电解质膜管组装成固体氧化物燃料电池,以氢气为燃料,研究了电池在600~850 ℃电池的电性能。实验结果表明,真空注浆法可制备出具有高密度和高电导率的YSZ-Al2O3电解质膜管,经1 600 ℃烧结2 h其相对密度已达理论密度的99.0%,接近理论密度。单电池的开路电压最大值为1.164 V,850 ℃时输出功率为0.42 W。 相似文献
7.
管状YSZ电解质的制备及其在固体氧化物燃料电池中的应用* 总被引:12,自引:2,他引:10
以 8mol %钇稳定化氧化锆 (YSZ)为原料 ,以阿拉伯树胶为分散剂和粘接剂 ,采用改进注浆法制备出长度为 2 2 6~2 60mm、壁厚为 0 .4~ 0 .9mm的致密YSZ电解质薄管。设计并制出带有一定锥度的空芯石膏模 ,研究了球磨时间对成型料浆稳定性的影响 ,烧结温度对YSZ样品致密度的影响。研究结果表明 :球磨时间在 75~ 14 0min的范围内料浆的稳定性较好 ,随烧结温度的升高 ,样品的致密度提高。用这种YSZ薄管制成固体氧化物燃料电池 ,电池的电学性能随温度的升高而明显提高 ,三节电池串联的最大功率为 2 .2W。 相似文献
8.
改进注浆法制备YSZ电解质薄管的烧结和电性能 总被引:4,自引:0,他引:4
用改进注浆法制备出8mol%钇稳定化氧化锆(YSZ)电解质长薄管,研究了YSZ电解质长薄管的烧结工艺,分析了烧结过程和Al2O3掺入量对其致密性的影响,确定了相应的烧结制度,并对所获得的YSZ电解质薄管的电性能进行了研究。研究结果表明:升温速度对YSZ长薄管的性能有着重要影响,坯体中阿拉伯树胶在600℃时被完全烧尽,1400~1500℃的温度范围是烧结的重要阶段,这期间气孔率显著下降,致密性明显提高。加入适量的Al2O3有助于提高YSZ长薄管的致密性。样品的氧离子电导率随烧结密度的增大而提高。利用改进注浆法和上述烧结工艺在1650℃已烧制出相对密度为96.7%、长度为266mm、厚度为0.4~0.9mm的YSZ电解质长薄管。 相似文献
9.
Electrical Properties and Applications of (ZrO2)0.92 (Y2O3)0.08 Electrolyte Thin Wall Tubes Prepared by Improved Slip Casting Method 总被引:2,自引:0,他引:2
8%(mole fraction) yttria-stabilized zirconia electrolyte thin wall tubes were prepared by improved slip casting method. The length and wall thickness of the tubes are 266 mm and 0.4 - 0.9 mm, respectively and the relative density is 96.7 %. The microstructure and electrical properties of samples sintered at different temperatures were studied using SEM and ac impedance spectroscopy. The effect of sintered density, grain and grain boundary on the electrical properties of the samples was analyzed. The research results show that the density of the samples increases gradually with increasing sintering temperatures. The microstructurc of samples strongly influences its electrical properties, and the electrical prop.erties of samples enhance with the increase of sintered density. The ionic conductivity of grain and grain boundary is increased as the sintering temperature increases. Better sinterability of the samples was obtained at the sintering temperature of 1650℃. The maximum open circuit voltage and short circuit current for single cell is 0.946V and 1.84A, respectively. The maximum output power of single cell is 0.46W at the temperature of 850℃. 相似文献
10.
Lanthanumchromite(LaCrO3)isparticularlysuitableforusingasaninterconnecterofsolidoxideelectrolytefuelcell(SOFC)becauseofitspropertiesofthehighelectronicconductivityinthefuelandoxidantatmospheres,thestabilityofoperatinginthefuelcellenvironment,andthe… 相似文献