Synthesis of Benzophenones and in vitro Evaluation of Their Anticancer Potential in Breast and Prostate Cancer Cells

Breast and prostate cancers are frequently treated with chemotherapy. Several novel chemicals are being reported for this purpose, particularly synthetic and natural benzophenones. This work reports the synthesis of substituted 2-hydroxybenzophenones through 1,4-conjugate addition/intramolecular cycloaddition/dehydration of nitromethane on key intermediate chromones. Structures were extensively studied by means of 2D NMR spectroscopy and single-crystal XRD. Their cytotoxicity was evaluated in vitro in two breast cancer cell lines (MDA-MB-231 and T47-D) and one prostate cancer cell line (PC3). The most potent compound exhibited good cytotoxic effects against the three cancer cell lines (IC₅₀ values ranging from 12.09 to 26.49 μm ) and induced cell-cycle retardation only on prostate cancer cells, which suggested that it might exert cell-type-specific effects.     

SFG and DFG investigation of Au(111), Au(210), polycrystalline Au,Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing KCN and 4-cyanopyridine

We report on potential-dependent in situ SFG and DFG spectroscopy carried out at Au(111), Au(210), polycrystalline Au, Au–Cu and Au–Ag–Cu electrodes in contact with aqueous solutions containing CN⁻ and 4-cyanopyridine (4CP). Spectroelectrochemical work was complemented by cyclic voltammetry. The chief stress has been placed on systematising and quantifying the interaction between 4CP and CN⁻ and the attending effects on the vibrational and electronic structures of the interface. The voltammetric behaviour of the investigated electrodes, modified by the addition of 4CP to the CN⁻ electrolyte, denote changes in the CN⁻ adsorption characteristics and effects of the adsorbed CN⁻ layer on the electrodic reactivity of 4CP. The differences among the investigated electrodes can be explained in terms of their respective degrees of atomic packing or with alloying effects on the stability of adsorbed CN⁻. The potential-dependent spectra have been analysed quantitatively with a model for the second order non linear susceptibility accounting for vibrational and electronic effects. The spectral changes induced by addition of 4CP denote interaction of the aromatic with the electrode through the CN⁻ monolayer. The non-resonant contribution yields information on the effects of 4CP on the fine structure of the bound electron density of states.     

Bacteroides fragilis enterotoxin cleaves the zonula adherens protein, E-cadherin

Strains of Bacteroides fragilis associated with diarrheal disease (enterotoxigenic B. fragilis) produce a 20-kDa zinc-dependent metalloprotease toxin (B. fragilis enterotoxin; BFT) that reversibly stimulates chloride secretion and alters tight junctional function in polarized intestinal epithelial cells. BFT alters cellular morphology and physiology most potently and rapidly when placed on the basolateral membrane of epithelial cells, suggesting that the cellular substrate for BFT may be present on this membrane. Herein, we demonstrate that BFT specifically cleaves within 1 min the extracellular domain of the zonula adherens protein, E-cadherin. Cleavage of E-cadherin by BFT is ATP-independent and essential to the morphologic and physiologic activity of BFT. However, the morphologic changes occurring in response to BFT are dependent on target-cell ATP. E-cadherin is shown here to be a cellular substrate for a bacterial toxin and represents the identification of a mechanism of action, cell-surface proteolytic activity, for a bacterial toxin.     

Carbon segregation and inclusions effects on surface fracture morphology of a 12% chromium stainless steel

Martensitic 12% chromium stainless steel is generally used for the manufacture of water vapour turbine blades. This material, under these environmental conditions, develops fatigue corrosion with failure as a result of the segregation of certain constituent elements such as phosphorus (P) and sulphur (S),^[1–3] or the presence of some types of inclusions.^[2–4] To be able to understand and explain these phenomena, in situ characterization of the fractured surfaces were performed for two types of samples: steel 1 as manufactured turbine material whose fracture mode is intergranular and steel 2 issued from last stage turbine blades after 100 000 h service at 40 °C whose fracture mode is transgranular. The techniques used for characterization were scanning electron microscopy (SEM) coupled with the x-ray analysis by energy dispersive spectroscopy (EDS), and auger electron spectroscopy (AES). The Auger results enabled the understanding of the brittle to ductile transition for the material by showing the simultaneous diffusion of carbon from grain boundaries (GB) to grains (G) and chromium from G to GB. Furthermore, the heavy segregation of phosphorus at the GBs could explain the intergranular crack rupture traces observed in steel 2. SEM observations coupled with EDS analysis showed the presence of different types of non-metallic inclusions such as silicon-based complex inclusions and manganese sulfides (MnS). The presence of silicon-based complex inclusions at GB could explain the intergranular fracture mode previously reported. The characterization of the fracture appearance suggests also that MnS inclusions can act as nucleation sites for secondary microcracks at the GB level that were observed after service.     

Determination of the vapor pressures of select polychlorinated dibenzo-p-dioxins and dibenzofurans at 75-275 °C

Vapor pressures were determined for several polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) at 75-275 °C, extending the available literature data to more relevant temperature regions and providing the first experimental data for 2,3,7-trichlorodibenzo-p-dioxin (2,3,7-TriCD). A modification of the effusion technique, based upon controlling the diffusion of the target compound and subsequent high resolution gas chromatography/low resolution mass spectrometry (HRGC/LRMS) analysis, was proven comparable to other accepted methods for determining the vapor pressures of semi-volatile organic compounds (SVOCs). Vapor pressures for octachlorodibenzo-p-dioxin (OCDD) and octachlorodibenzofuran (OCDF) were in excellent agreement with those reported in literature. The application of the current method for the vapor pressure determinations of eight polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) in the extended temperature range (up to 275 °C) is reported. The extension of the vapor pressures to such temperatures, unprecedented for the PCDDs/Fs, is important for vapor-particle partitioning modeling in regions relevant to PCDD/F formation and control. Estimates for the melting temperatures and enthalpies of sublimation and vaporization are also reported, the latter for which no experimentally determined values have been found in the literature. The use of the method to deliver reproducible, trace concentrations (ppt-ppb) of targets was applied to the calibration of the jet-REMPI/TOFMS as an online detector for low chlorinated PCDDs/Fs.     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Application of the cross entropy method to the GLVQ algorithm

This paper discusses an alternative approach to parameter optimization of well-known prototype-based learning algorithms (minimizing an objective function via gradient search). The proposed approach considers a stochastic optimization called the cross entropy method (CE method). The CE method is used to tackle efficiently the initialization sensitiveness problem associated with the original generalized learning vector quantization (GLVQ) algorithm and its variants. Results presented in this paper indicate that the CE method can be successfully applied to this kind of problem on real-world data sets. As far as known by the authors, it is the first use of the CE method in prototype-based learning.     

Eliminating Selective Dropping Attack in Mobile Ad Hoc Network

Wireless Personal Communications - In this paper, we propose a new reputation approach, called I-WD (improved WatchDog). We attempt to eliminate selective dropping attack that ensue when malicious...     

Bending-stretching analysis of thick functionally graded micro-plates using higher-order shear and normal deformable plate theory

In the present article, higher-order shear and normal deformable plate theory together with modified couple stress theory are developed to study the bending analysis of thick functionally graded rectangular micro-plates. One material length scale parameter is used for capturing the size effects. Utilizing the variational approach and also a principle of virtual displacement, a new form of equilibrium equations and the corresponding boundary conditions are derived. It is assumed that material properties vary through the thickness according to the power law function. Finally, an analytical solution for the bending problem of a simply supported FG rectangular micro-plate is presented.