The Affinity of Basic Dyes for Leacril 16 Acrylic Fibre

The dyeing affinity of some thiazole and benzothiazole basic azo dyes for Leacril 16 acrylic fibre was measured using Langmuir isotherms. Results show a close dependence of dye structure on affinity.     

Determination of nanotubes properties by Raman spectroscopy

The basic concepts and characteristics of Raman spectra from single-wall carbon nanotubes (SWNTs, both isolated and bundled) are presented. The physical properties of the SWNTs are introduced, followed by the conceptual framework and characteristics of their Raman spectra. Each Raman feature, namely the radial breathing mode, the tangential G band, combination modes and disorder-induced bands are discussed, addressing their physical origin, as well as their capability for characterizing SWNT properties.     

Mathematical modeling of gas‐phase biofilter performance

In the present paper, a new mathematical model describing the physical, chemical and biological phenomena involved in the process of contaminant removal in biofilters is developed. In addition to the contaminant, the key components of the present theoretical model are carbon dioxide and oxygen. The model predicts the concentration profile of the key components in the gas phase, the biofilm and the sorption liquid retained in the solid particles composing the filter bed at both steady and transient regimes. The model equations were solved numerically and comparison between theory and experiment showed that the model results for styrene and carbon dioxide concentration profiles were in very good agreement with experimental data for the biofiltration of styrene vapors at steady state. The analysis of oxygen concentration profile in the biofilm predicted by the theoretical model revealed that oxygen limitation does not occur under the operating styrene biodegradation rate in the biofilter. Copyright © 2003 Society of Chemical Industry     

Radiation induced carbon complexes in gallium arsenide

Gallium arsenide grown by the metallorganic chemical vapour deposition method and n-doped to various silicon concentrations was irradiated with reactor neutrons (1 MeV equivalent damage in silicon) in the fluence range 0 to 3 × 10¹⁵ cm⁻². Native defects, including carbon which is a residual impurity of the growth method, and those introduced by irradiation, were characterized by photoluminescence (PL) and deep level transient spectroscopy (DLTS). In some samples with fixed doping value, the PL intensity of all the transitions, including that to the carbon impurity increases at low fluence levels before decreasing at high fluence. At higher fluences, the transition to the carbon impurity goes through other maxima. The carbon PL intensity versus fluence curve depends on initial doping. DLTS results reveal the removal of a trap EL12 at low fluences, but the introduction of other traps at higher fluences. The defect introduction rates depend on fluence. We attribute the variation in the carbon PL intensity to an interaction between the defects introduced by the irradiation and the carbon impurity.     

Value of the Di Maria leads in the electrocardiographic diagnosis of posterior myocardial infarct

Authors retain, on the basis of their experiences, that right chest leads proposed by Di Maria for the infer-posterior and postero-basic myocardium wall study can overall be useful in those cases which had posterior myocardial infarction and where standard leads did not show variations or showed untrustworthy variations. Therefore Authors also supported by vectorcardiographic findings, recommend the routine use of Di Maria leads.     

Biodiesel compatibility with carbon steel and HDPE parts

Compatibility of the new environmentally-friendly alternative of diesel engine fuels, biodiesel, with storage and engine part materials, is still an open issue. In this work, the interaction between three fuels (petroleum diesel and two types of biodiesel — soybean and sunflower) and two materials (carbon steel and high density polyethylene) used in storage and automotive tanks, is analyzed in detail. A wide set of characterization techniques was used to evaluate the changes in both solid and fluid materials, as weight change measurement, optical, scanning electron and atomic force (AFM) microscopies, Raman and FTIR spectroscopies, and differential scanning calorimetry. The AFM technique allowed detecting surface roughness and morphology changes in the metallic material following the trends in the weight losses. In the case of polymeric material, weight gain by fluid absorption occurred, being detected by the spectroscopic techniques. The biodiesel fuels underwent some ageing however this phenomenon did not affect the interaction between the biodiesel fuels and the substrates. The petrodiesel, which did not age, caused more significant degradation of the substrates.     

Design of high fastness acid dyes for silk: a chemometric approach

A chemometric strategy tor the design of acid dyes for silk is reported. A small set of representative dyes was selected by the technique of fractional factorial design, using the principal properties of the substituents as design variables. The selected dyes were synthesised and fastness properties on silk were measured. Wash fastness and light fastness values were related to the chemical structure by the partial least squares (PLS) method. The models were used to predict the fastness of new dyes of the same class and to optimise the structure.     

Leaching of cell wall components caused by acid deposition on fir needles and trees

Virgin fir forests have been declining since the 1960s at Mt. Oyama, which is located at the eastern edge of the Tanzawa Mountains and adjacent to the Kanto plain in Japan. An acid fog frequently occurs in the mountains. We collected throughfall and stemflow under fir trees and rainfall every week during January-December 2004 at Mt. Oyama to clarify the influence of acid fog on the decline of fir (Abies firma) needles. In relation to throughfall and stemflow, D-mannose, D-galactose, and D-glucose are the major neutral sugar components; only D-glucose is a major component of rainfall. The correlation coefficient between the total neutral sugars and uronic acid (as D-galacturonic acid), which is a key component of the cross-linking between pectic polysaccharides, was high except for rainfall. The leached amount of calcium ion, neutral sugars, uronic acid, and boron is related to the nitrate ion concentration in throughfall. Results of a laboratory exposure experiment using artificial fog water simulating the average composition of fog water observed at Mt. Oyama (simulated acid fog: SAF) on the fir seedling needles also shows a large leaching of these components from the cell walls of fir needles. The leaching amount increased concomitantly with decreasing pH of the SAF solution. We also observed that a dimeric rhamnogalacturonan II-borate complex (dRG-II-B) that exists in the cell wall as pectic polysaccharide was converted to monomeric RG-II (mRG-II) by the leaching of calcium ion and boron. Results not only of field observations but also those of laboratory experiments indicate a large effect of acid depositions on fir needles.     

Idealisation of ships with large hatch openings by a thin-walled rod of open section on many elastic supports

The open part of the ship's hull with large hatch openings is considered as a prismatic thin-walled rod of open section on many elastic supports subjected to torsion. The stiffness of deck strips and the ship's sides in the deck plane is taken into account by elastic supports. Internal forces and displacements of the open part of the hull and deck strips are obtained in an analytical form, using the method of initial parameters. Stresses and displacements can be presented numerically and graphically, in a form suitable for preliminary calculations. A numerical example is given.