A note on “A new method for ranking discovered rules from data mining by DEA”, and a full ranking approach

In a recent paper by Toloo et al. [Toloo, M., Sohrabi, B., & Nalchigar, S. (2009). A new method for ranking discovered rules from data mining by DEA. Expert Systems with Applications, 36, 8503–8508], they proposed a new integrated data envelopment analysis model to find most efficient association rule in data mining. Then, utilizing this model, an algorithm is developed for ranking association rules by considering multiple criteria. In this paper, we show that their model only selects one efficient association rule by chance and is totally depended on the solution method or software is used for solving the problem. In addition, it is shown that their proposed algorithm can only rank efficient rules randomly and will fail to rank inefficient DMUs. We also refer to some other drawbacks in that paper and propose another approach to set up a full ranking of the association rules. A numerical example illustrates some contents of the paper.     

Identification and classification of ERP critical failure factors in Iranian industries

Implementation of Enterprise Resource Planning systems (ERPs) is a complex and costly process, which usually results in serious failures. The majority of previous studies and research projects have been conducted in identifying ERP Critical Success Factors (CSFs) rather than Critical Failure Factors (CFFs). On the other hand, most studies have been devoted to developed countries, while in developing countries, many companies have moved towards using such systems. The majority of IT/IS management standards and guidelines have been developed by technologically-leading countries. But developing countries, which mostly confront with especial challenges, have a different condition from the implicit assumptions of leading countries. Iran is one of these countries that many of its ERP implementation projects led to failure. There is no comprehensive study that identifies ERP CFFs in Iranian industries. The main purpose of this study is to identify such factors and classify them to help other industries, consultants and implementers to prevent failures in the implementation of ERP projects. So, at first, with the semi structured interviews and literature reviews, 47 failure factors were identified. After that a questionnaire developed and sent to ERP project team members in Iranian industries that failed in their ERP projects. Robust Exploratory Factor Analysis (EFA) has been used for data analysis, which finally classified critical failure factors in seven groups named as vendor and consultant, human resources, managerial, project management, processes, organizational and technical. The results of this study have provided a very useful reference for scholars and managers to identify the relevant issues of ERP projects failure in developing countries.     

New approaches for determining a common set of weights for a voting system

Data Envelopment Analysis (DEA) is one of the methods that have been proposed to determine the weights in a ranked voting system. DEA solves one model corresponding to each candidate and evaluates candidates with their own weights. However, sometimes solving only one model, and evaluating the candidates based on a common set of weights, is preferred. In this paper, some drawbacks of existing models are explained and new approaches for determining a common set of weights are proposed. Numerical examples are utilized to illustrate the content of the paper.     

Physical and mechanical properties of a poly-3-hydroxybutyrate-coated nanocrystalline hydroxyapatite scaffold for bone tissue engineering

A major challenge for tissue engineers is the design of scaffolds with appropriate physical and mechanical properties. The present research discusses the formation of ceramic scaffolding in tissue engineering. Hydroxyapatite (HAp) powder was made from bovine bone by thermal treatment at 900?°C; 40, 50 and 60%wt porous HAp was then produced using the polyurethane sponge replication method. Scaffolds were coated with poly-3-hydroxybutyrate (P3HB) for 30?s and 1?min in order to increase the scaffold??s mechanical properties. XRD, SEM and FT-IR were used to study phase structure, morphology and agent groups, respectively. In XRD and FT-IR data, established hydrogen bands between polymer and ceramic matrix confirm that the scaffold is formed as a composite. The scaffold obtained with 50%wt HAp and a 30?s coating was 90% porous, with an average diameter of 100?C400???m, and demonstrated a compressive strength and modulus of 1.46 and 21.27?MPa, respectively. Based on these results, this scaffold is optimised for the aforementioned properties and can be utilised in bone tissue engineering.     

Polyhydroxybutyrate/chitosan/bioglass nanocomposite as a novel electrospun scaffold: fabrication and characterization

Scaffolds and their features play a central role in tissue engineering; so this study is based on the production of a series of electrospun PHB/Chitosan/nBG nanocomposite scaffolds with 9 wt% polyhydroxybutyrate, 10, 15 and 20 wt% chitosan and 7.5, 10 and 15 wt% nanobioglass (nBG). Electrospinning process was performed with optimal conditions of spinning machine including voltage of 16 kV, syringe-collector spacing of 16 cm, and output rate of 1 µl per hour. The developed phases and the formation of chemical bonds between ceramic and polymer bands were studied through XRD and FTIR analyses. The FE-SEM and TEM analyses showed uniform morphology of nanofibers and dispersion of bioglass nanoparticles in the fiber structure. The presence of 10 wt% bioglass nanoparticles and 15 wt% chitosan increased the tensile strength of fibers to 3.42 MPa, which was about four times greater than strength of control sample (pure PHB). The developed fibers were kept 28 days in SBF solution and 60 days in PBS solution to assess their bioactivity and biodegradability. The results showed that the presence of bioglass nanoparticles leads to a dramatic increase in absorption of calcium and phosphorus ions and weight loss of scaffold. The developed scaffold can be used for bone and teeth tissue engineering applications.     

Wire electrical discharge machining of ASP30 tool steel

Wire electrical discharge machining is a non-traditional cutting process for machining of hard and high strength materials. This study analyzed the effects of the main input parameters of wire electrical discharge machining of ASP30 steel (high alloyed Powder metallurgical [PM] high speed steel) as the workpiece on the material removal rate and surface roughness. The input parameters included spraying pressure and electric conductivity coefficient of the dielectric fluid, linear velocity of the wire and wire tension. The machined surface quality was evaluated using SEM pictures. Results indicated that increasing the spraying pressure of dielectric fluid leads to a higher material removal rate and surface roughness and that increasing the wire tension, linear velocity of wire, and electric conductivity of the dielectric fluid decreases the material removal rate and surface roughness.

     

Highly efficient supported AlCl3-based cationic catalysts to produce polyα-olefin oil base stocks

The main aim of this research is to decrease the amount of AlCl₃ content that is very corrosive and hazardous in the catalytic system, required for the α-olefin oligomerization without substantial change of final oil features. This was successfully achieved by supporting AlCl₃ on different carriers. More precisely, a series of supported bimetallic catalysts was synthesized by immobilization of AlCl₃ and TiCl₄ onto Al₂O₃, SiO₂, and mixed supports, that is, Al₂O₃/FeCl₃ and SiO₂/FeCl₃. It was found that silica and alumina-based catalysts had higher catalytic activities compared to support free AlCl₃; however, this enhancement for silica-based supports was more significant. According to gel permeation chromatography (GPC) results, the use of single supports, that is, Al₂O₃ and SiO₂, increased oligomer's molecular weight, while the application of mixed supports resulted in the decrease of molecular weight of the oligomers. Viscosity characteristics of the synthesized oligomers have also been studied at two different temperatures of 40 and 100°C (KV⁴⁰ and KV¹⁰⁰). The viscosity index (VI) values, derived from KV⁴⁰ and KV¹⁰⁰, of the prepared oligomers were in the range of 126–145. The molecular weight and termination mechanisms of the oligomers were studied by ¹H-NMR spectroscopy. The obtained results disclosed that the employed reaction conditions led to the production of oligomer chains with various structures including vinylidene (Vd), and di and three-substituted vinylene (2Vn, 3Vn) structures.     

An Overview on SARS‑CoV‑2(COVID‑19)and Other Human Coronaviruses and Their Detection Capability via Amplification Assay,Chemical Sensing,Biosensing,Immunosensing,and Clinical Assays

A novel coronavirus of zoonotic origin(SARSCoV-2)has recently been recognized in patients with acute respiratory disease.COVID-19 causative agent is structurally and genetically similar to SARS and bat SARS-like coronaviruses.The drastic increase in the number of coronavirus and its genome sequence have given us an unprecedented opportunity to perform bioinformatics and genomics analysis on this class of viruses.Clinical tests like PCR and ELISA for rapid detection of this virus are urgently needed for early identification of infected patients.However,these techniques are expensive and not readily available for point-of-care(POC)applications.Currently,lack of any rapid,available,and reliable POC detection method gives rise to the progression of COVID-19 as a horrible global problem.To solve the negative features of clinical investigation,we provide a brief introduction of the general features of coronaviruses and describe various amplification assays,sensing,biosensing,immunosensing,and aptasensing for the determination of various groups of coronaviruses applied as a template for the detection of SARS-CoV-2.All sensing and biosensing techniques developed for the determination of various classes of coronaviruses are useful to recognize the newly immerged coronavirus,i.e.,SARS-CoV-2.Also,the introduction of sensing and biosensing methods sheds light on the way of designing a proper screening system to detect the virus at the early stage of infection to tranquilize the speed and vastity of spreading.Among other approaches investigated among molecular approaches and PCR or recognition of viral diseases,LAMP-based methods and LFAs are of great importance for their numerous benefits,which can be helpful to design a universal platform for detection of future emerging pathogenic viruses.     

Poly1‐hexene: New impact modifier in HIPS technology

Poly1‐hexene was prepared using a conventional heterogeneous Ziegler–Natta catalyst and its stereoregularity was characterized using ¹³C‐NMR analysis. New kind of high impact polystyrene (HIPS) was prepared by radical polymerization of styrene in the presence of different amounts of synthesized poly1‐hexene (PH) as impact modifier (HIPS/PH) and compared with conventional high impact polystyrene with polybutadiene (HIPS/PB) as rubber phase. Scanning electron microscopy (SEM) revealed that the dispersion of poly1‐hexene in polystyrene matrix was more uniform compared with it in HIPS/PB. The impact strength of HIPS/PH was 29–79% and 80–289% higher than that in HIPS/PB and neat polystyrene, respectively. FTIR was used to confirm more durability of HIPS/PH samples toward ozonation. To study the effect of rubber type and amount on the T_gs of polystyrene, differential scanning calorimetry was employed. Results obtained from TGA demonstrated higher thermal stability of HIPS/PH sample in comparison with conventional HIPS/PB one. Our obtained results suggest new high impact polystyrene that in all studied aspects has better performance than the conventional HIPS. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43882.