Numerical simulation of molding-defect formation during resin transfer molding

The present study investigated a numerical simulation of molding-defect formation during resin transfer molding using boundary element method and line dynamics. The proposed method enables to simulate small molding defects by increasing the node for required position during time evolution; thereby, the method computes high-resolution flow front without being affected by the initial mesh geometry. The method was applied to the radial injection RTM with single inlet, and it was confirmed by comparison with theoretical value based on Darcy’s law that the flow advancement was computed with high accuracy. In addition, the method was also applied to the flow advancement for inclusion problem with cylinder, and four-point injection problem. The simulated flow behavior, void formation, and shrinkage agreed with the results in references. Finally, the method was compared with experiments using two-point injection problem. The computed configuration of the flow front and weld line agreed well with the experimental results.     

Spindle cell carcinoma of the breast: a case report and an immunohistochemical study including p53 and Ki-67 expression

A rare case of spindle cell carcinoma (SpCC) of the breast occurring in a 51-year-old Japanese woman is reported. A firm and well-circumscribed tumor, measuring 9 x 8.5 x 8.5 cm, was located on the upper lateral region of the right breast. Microscopically, the tumor consisted of sheets of both malignant spindle cells and poorly differentiated ductal carcinoma containing squamoid islands with gradual transition to the spindle cell component. The immunocytochemical expression of epithelial markers was recognized in the spindle cells, as well as in the carcinomatous cells. Moreover, the spindle cell component expressed vimentin, alpha-smooth muscle actin and S-100 protein. Ultrastructurally, in addition to the features of adenocarcinoma, squamous or myoepithelial differentiation was confirmed in the spindle cell component. These findings thus suggest an epithelial origin with squamous differentiation and myoepithelial participation in the genesis of SpCC. In a comparative study, the expression of p53 protein and Ki-67 as a proliferation marker in each component of this tumor was also investigated. The mean p53 labeling index (LI) in both the carcinomatous and spindle cell area was similar, however the mean MIB-1 LI in the spindle cell area was significantly higher than that in the carcinomatous area. The results indicate that p53 overexpression is involved in the tumorigenesis of both components in the SpCC, and the spindle cell component shows a higher degree of proliferative activity than the carcinomatous component.     

Capsaicin in the 4th ventricle abolishes retching and transmission of emetic vagal afferents to solitary nucleus neurons

Systemic tachykinin NK1 receptor antagonists and resiniferatoxin are known to abolish vomiting mediated by vagal afferents. Emetic vagal afferents have been shown to make synaptic contact with neurons in the medial solitary nucleus. These results suggest that substance P participates in the synapse as a mediator. To examine this possibility, the effects of 4th-ventricular application of capsaicin (0.033-33 mM, 20-30 microl) and resiniferatoxin (1.6-160 microM, 20-30 microl) on the activity of neurons in the medial solitary nucleus and fictive retching induced by vagal stimulation were observed in paralyzed decerebrate dogs. Capsaicin (33 mM) and resiniferatoxin (160 microM) initially increased the neuronal firing and occasionally produced retching, then abolished both neuronal and retching responses. However, stimulation of the medial solitary nucleus continued to provoke retching. Field potential changes in the medial solitary nucleus evoked by pulse-train vagal stimulation decreased in amplitude, but did not disappear. Latencies of neuronal firing and evoked potentials were about 300 ms. These results suggest that emetic vagal afferents are capsaicin-sensitive C fibers which may have substance P as an excitatory transmitter or modulator.     

Selective detection of a catecholamine against electroactive interferents using an interdigitated heteroarray electrode consisting of a metal oxide electrode and a metal band electrode

We developed an interdigitated array electrode (IDAE) consisting of a metal oxide electrode and a metal band heteroelectrode and employed it for the selective detection of catecholamines. We used an indium-tin oxide (ITO) film as the oxidation electrode of the IDAE because the ITO was able to suppress response currents from L-ascorbic acid (AA) and uric acid (UA), which are major electroactive interferents in biological fluids. However, the ITO film also suppresses the reduction of quinones including oxidized catecholamines. We developed a simple technique for fabricating our hetero IDAE, which also preserves the electrochemical properties of the ITO. When we compared hetero ITO-gold, homo ITO-ITO, and carbon-carbon IDAEs, we found that the hetero IDAE provided both high sensitivity and selectivity for DA detection. We achieved high selectivities for DA against AA and UA. The ratios of the response currents of AA and UA to DA were calculated as 6 and 5%, respectively.     

Climate Change Impact Assessment on Blue and Green Water by Coupling of Representative CMIP5 Climate Models with Physical Based Hydrological Model

Water Resources Management - Climatic changes have altered hydrological and climatic parameters worldwide, and climate projections suggest that such alterations will continue. In order to maintain...     

A Fluid Liquid‐Crystal Material with Highly Polar Order

An anomalously large dielectric permittivity of ≈10⁴ is found in the mesophase temperature range (MP phase) wherein high fluidity is observed for a liquid‐crystal compound having a 1,3‐dioxane unit in the mesogenic core (DIO). In this temperature range, no sharp X‐ray diffraction peak is observed at both small and wide Bragg angles, similar to that for a nematic phase; however, an inhomogeneous sandy texture or broken Schlieren one is observed via polarizing optical microscopy, unlike that for a conventional nematic phase. DIO exhibits polarization switching with a large polarization value, i.e., P = 4.4 µC cm^?2, and a parallelogram‐shaped polarization–electric field hysteresis loop in the MP phase. The inhomogeneously aligned DIO in the absence of an electric field adopts a uniform orientation along an applied electric field when field‐induced polarization switching occurs. Furthermore, sufficiently larger second‐harmonic generation is observed for DIO in the MP phase. Second‐harmonic‐generation interferometry clearly shows that the sense of polarization is inverted when the +/? sign of the applied electric field in MP is reversed. These results suggest that a unidirectional, ferroelectric‐like parallel polar arrangement of the molecules is generated along the director in the MP phase.     

TL-10: A programming language for assembly robots

TL-10, Toyoto Robot Language-10, is a BASIC-like robot language. It has functions that define locations and subroutine parameters, which are useful in the accumulation and the transference of robot applied technology. It also has functions to communicate with other computers such as those for vision systems. The important features are described and illustrated by examples.     

Water molecule adsorption properties on surfaces of MVO4 (M = In, Y, Bi) photo-catalysts

Water molecule adsorption properties at the surface of InVO₄, YVO₄, and BiVO₄, which have indicated promising photocatalytic properties, have been investigated using an ab initio molecular dynamics approach. It was found that the water molecules were adsorbed dissociatively to the three-fold oxygen coordinated V (3c-V) sites on the (001) surface and 4c-In sites on the (100) surface of InVO₄, however, in a non-dissociated molecular form on the 5c-Bi site on the (100) surface of BiVO₄ and the 7c-Y site on the (010) surface of YVO₄. The adsorption energies of water molecule and geometries of the systems with adsorbed water molecules are reported in detail.     

Kinetics of self-interstitial cluster aggregation near dislocations and their influence on hardening

Kinetic Monte Carlo (KMC) computer simulations are performed to determine the kinetics of SIA cluster ‘clouds’ in the vicinity of edge dislocations. The simulations include elastic interactions amongst SIA clusters, and between clusters and dislocations. Results of KMC simulations that describe the formation of ‘SIA clouds’ during neutron irradiation of bcc Fe and the corresponding evolution kinetics are presented, and the size and spatial distribution of SIA clusters in the cloud region are studied for a variety of neutron displacement damage dose levels. We then investigate the collective spatio-temporal dynamics of SIA clusters in the presence of internal elastic fields generated by static and mobile dislocations. The main features of the investigations are: (1) determination of the kinetics and spatial extent of defect clouds near static dislocations; (2) assessment of the influence of localized patches of SIA clouds on the pinning-depinning motion of dislocations in irradiated materials; and (3) estimation of the radiation hardening effects of SIA clusters. The critical stress to unlock dislocations from self-interstitial atom (SIA) cluster atmospheres and the reduced dislocation mobility associated with cluster drag by gliding dislocations are determined.