Comparison of gait between young adults fitted with the space foot and nondisabled persons

Prosthetic feet having new keel configurations were specially designed to store deformation energy during early and midstance and release it at push-off. These prosthetic components display longitudinal symmetry favoring good energy storage/release capability in the sagittal plane. The need for inverters/everters either as independent components or within the foot structure has long been recognized. This article documents the walking and slow jogging performances of six young adults wearing below-knee prostheses fitted with the Space Foot, a flexible foot prosthesis that provides medio-lateral control at heel-strike and lateral and forward propulsion at push-off. Results indicate that the Space Foot behaves as a flexible keel foot prosthesis. Its gait performances are also good for fast walking; however, the Space Foot's actual design should be modified if used in sporting activities involving running.     

Brokers and bricoleurs: entrepreneurship in Wales' online music scene

 The power of some new entrants to the music industry derives from their position as brokers in computer-mediated environments. Brokers act instrumentally to exploit their position within a network which, in turn, depends on their ability to build and sustain links (and, in computer-mediated environments, hyperlinks). Bricolage in computer-mediated entrepreneurship refers to the intuitive manipulation of resources in order to achieve (perhaps tacit) goals. Without careful stewardship of the new intellectual wealth thus created, bricolage may profit neither the individual nor the wider community. Accepted 14 March 2002     

Electroantennographic and coupled gas chromatographic-electroantennographic responses of the mediterranean fruit fly,Ceratitis capitata,to male-produced volatiles and mango odor

We have identified five compounds from the headspace of calling male Mediterranean fruit flies (medfly),Ceratitis capitata (Wiedemann), and three compounds from the headspace of ripe mango (Mangifera indica L). using coupled gas chromatographic-electroantennographic (GC-EAG) recordings, coupled gas chromatographic-mass spectrometric (GC-MS) analysis, and electroantennographic (EAG) assays of standards. The male-produced volatiles eliciting responses from female antennae were ethyl-(E)-3-octenoate, geranyl acetate, (E,E)--farnesene, linalool, and indole. An EAG dose-response test of linalool enantiomers and indole with female medfly antennae showed relatively strong EAG activities, but no significant difference between (R)-(-)-linalool and (S)-(+)-linalool. The three mango volatiles were identified as (1S)-(-)--pinene, ethyl octanoate, and-caryophyllene. In addition, a strong antennal response was recorded from a contaminant,-copaene, present in a commercial sample of-caryophyllene. The EAG response amplitudes from both male and female antennae to the above three mango volatiles were significantly greater than to a hexanol control. For both male and female medfly antennae, the greatest EAG responses were elicited by-caryophyllene followed by ethyl octanoate. The mean EAG responses of female antennae to-caryophyllene and (1S)-(-)--pinene were significantly greater than those of male antennae.     

MET𝔸P: revisiting Privacy-Preserving Data Publishing using secure devices

The goal of Privacy-Preserving Data Publishing (PPDP) is to generate a sanitized (i.e. harmless) view of sensitive personal data (e.g. a health survey), to be released to some agencies or simply the public. However, traditional PPDP practices all make the assumption that the process is run on a trusted central server. In this article, we argue that the trust assumption on the central server is far too strong. We propose Met _??P, a generic fully distributed protocol, to execute various forms of PPDP algorithms on an asymmetric architecture composed of low power secure devices and a powerful but untrusted infrastructure. We show that this protocol is both correct and secure against honest-but-curious or malicious adversaries. Finally, we provide an experimental validation showing that this protocol can support PPDP processes scaling up to nation-wide surveys.     

Estimation of the 3-D center of mass excursion from force-plate data during standing

Biomechanical models are used with force-plate information to determine the center of mass (COM) trajectory during standing. They are usually based on simplifying assumptions and are often limited to a single-plane analysis. The objectives of this study were to present a three-dimensional (3-D) model to calculate the excursion of the COM of the human body, validate it and compare its performance to a video-based system during quiet standing and antero-posterior (AP) and medio-lateral (ML) self-imposed oscillations. In addition to the vertical displacements of the COM, the originality of the method lies in eliminating the accelerations terms in the model and their related assumptions. The model was able to estimate closely the COM displacements in quiet standing [a root mean square (RMS) of 0.9 mm or less]. For the self-imposed oscillations, the RMS differences were 6.6 mm in the AP and ML directions and 1.6 mm along the vertical axis. For all three testing conditions, the coefficients of correlation of the COM displacements between the model and the video methods were above 0.8 with the exception of the vertical direction, where the values were more variable.     

Behavior of Pt Atoms on Oxide Supports During Reduction Treatments at Elevated Temperatures,Characterized by Aberration Corrected Stem Imaging

Abstract  

Aberration-corrected scanning transmission electron microscopy at the sub-?ngstr?m resolution allows imaging the structure of catalytic materials at the single atom level and permits fundamental studies of the behavior of heavy metal catalytic species as a result of elevated temperature gas-treatments. The present study is aimed at understanding the development of clusters and nanoparticles of Pt on γ-alumina during reduction treatments of a pre-oxidized highly dispersed catalyst. A special built ex situ reactor and a specimen holder allowing cyclic anaerobic transfer between the reactor and microscope were used for the study. The number of atoms in a nascent cluster can be determined along with the general shape of the cluster. Reduction experiments without air exposure of the sample showed that although clusters are formed at 500 °C, many Pt atoms are not associated with the cluster and are still dispersed on the catalyst support. After a 700 °C reduction, all of the Pt atoms are associated with the clusters. Movement of the clusters on the catalyst support is different depending upon the catalyst support.     

Observation of Sublattice Disordering of the Catalytic Sites in a Complex Mo–V–Nb–Te–O Oxidation Catalyst Using High Temperature STEM Imaging

A Mo–V–Nb–Te–O oxidation catalyst has been imaged using scanning transmission electron microscopy at 780 K, which is slightly above its operating temperature. We observe a sublattice disordering of the corner-sharing octahedra forming the catalytic sites containing V⁵⁺ while the edge-sharing pentagonal bipyramidal {Nb(Mo₅)} sublattice remains structurally more rigid and thereby maintains the overall structural integrity of the catalyst. Imaging the termination of the edges of the [001] basal zones at room temperature reveal a preference for presence of a closed network of secondary structural {Nb(Mo)₅} units providing further evidence of the stability of this sublattice structure. We propose that sublattice disordering of catalytic sites enables structural flexibility to accommodate different oxidation states during multistep chemical reactions within a more rigid superstructure and presents a new paradigm for compositionally and structurally complex catalysts.     

Efficient polymer nanocrystal hybrid solar cells by improved nanocrystal composition

We demonstrate the importance of the nanocrystal surface treatment and the inorganic composition for hybrid solar cells. Mixtures of CdSe nanorods and CdSe quantum dots integrated in hybrid solar cells together with the conjugated polymer poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta[2,1-b;3,4-b']-dithiophene)-alt-4,7-(2,1,3-benzothiadiazole)] (PCPDTBT) perform better than nanorod and quantum dot only based devices. In addition larger sized quantum dots show a similar improvement after integration in respective solar cells. Power conversion efficiency values exceeding 3% are observed. A first result on the shelf lifetime of such a device is highlighted.     

Weathering of High-Density Polyethylene-Wood Plastic Composites

Due to the widespread use of wood-plastic composites (WPCs), high-density polyethylene-wood flour composites (HDPE/WF) were studied in order to determine their stability in different application conditions. UV degradation and periodic absorption/desorption of moisture cause damaging changes to material during WPCs’ exterior application, so it is necessary to ensure WPCs’ durability against atmospheric influences. Samples were characterized by FTIR spectroscopy and scanning electron microscopy (SEM) in order to study the degradation after simulated weathering. The degree of water absorption was also determined. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were used for the determination of composites’ thermal properties. Results show that the stability of the HDPE/WF composites to UV treatment highly depends on stabilizer content and its dispersion in the polymer matrix. Incompatibility of HDPE and wood particles is a major problem that should be solved to achieve good durability and satisfying properties in use.