Environmental effects on the strength and impact damage resistance of alumina based oxide/oxide ceramic matrix composites

In this study the effects of high temperature and moisture on the impact damage resistance and mechanical strength of Nextel 610/alumina silicate ceramic matrix composites were experimentally evaluated. Composite laminates were exposed to either a 1050°C isothermal furnace-based environment for 30 consecutive days at 6 h a day, or 95% relative humidity environment for 13 consecutive days at 67°C. Low velocity impact, tensile and short beam strength tests were performed on both ambient and environmentally conditioned laminates and damage was characterized using a combination of non-destructive and destructive techniques. High temperature and humidity environmental exposure adversely affected the impact resistance of the composite laminates. For all the environments, planar internal damage area was greater than the back side dent area, which in turn was greater than the impactor side dent area. Evidence of environmental embrittlement through a stiffer tensile response was noted for the high temperature exposed laminates while the short beam strength tests showed greater propensity for interlaminar shear failure in the moisture exposed laminates. Destructive evaluations exposed larger, more pronounced delaminations in the environmentally conditioned laminates in comparison to the ambient ones. External damage metrics of the impactor side dent depth and area directly influenced the post-impact tensile strength of the laminates while no such trend between internal damage area and residual strength could be ascertained.     

Comparison of single-fiber and macro electrode recordings: relationship to motor unit action potential duration

The factors contributing to the duration of a motor unit action potential (MUAP) are believed to be well known, with both manual measurements and computer simulations agreeing with respect to MUAP durations approaching 10 ms. In this investigation, it is clearly demonstrated that use of a wide-open amplifier bandpass combined with signal-to-noise ratio enhancement results in MUAP durations approaching 30 ms recorded with either a macro or single-fiber electrode. Why the clinically recorded MUAP duration differs significantly from these physiologic durations is discussed. A hypothesis is presented whereby the major contributing factor toward MUAP duration is the total time of action potential transmembrane current flow along the muscle fiber from end-plate zone to musculotendinous junction.     

When danger lurks in the background: Attentional capture by animal fear-relevant distractors is specific and selectively enhanced by animal fear.

Across 2 experiments, a new experimental procedure was used to investigate attentional capture by animal fear-relevant stimuli. In Experiment 1 (N = 34), unselected participants were slower to detect a neutral target animal in the presence of a spider than a cockroach distractor and in the presence of a snake than a large lizard distractor. This result confirms that phylogenetically fear-relevant animals capture attention specifically and to a larger extent than do non-fear-relevant animals. In Experiment 2 (N = 86), detection of a neutral target animal was slowed more in the presence of a feared fear-relevant distractor (e.g., a snake for snake-fearful participants) than in presence of a not-feared fear-relevant distractor (e.g., a spider for snake-fearful participants). These results indicate preferential attentional capture that is specific to phylogenetically fear-relevant stimuli and is selectively enhanced in individuals who fear these animals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The effect of solidification time and heat treatment on the fatigue properties of a cast 319 aluminum alloy

Solidification time and heat treatment are known to have a large effect on the microstructure of cast aluminum alloys. This study was conducted to quantify how the fatigue properties of a 319-type aluminum alloy are affected by solidification time and heat treatment. Both porosity-containing (non-hot isostatically pressed (HIP)) and porosity-free (HIP) samples in the T6 (“peak aged”) or T7 (“overaged”) heattreated conditions were tested. As the solidification time increased, the average initiating pore diameter increased and stress-controlled fatigue life decreased. Heat treatment was observed to have a large effect on fatigue properties of the HIP samples. However, in the non-HIP fatigue samples, heat treatment did not significantly change the fatigue life or fatigue strength of the cast 319-type alloy. The absence of an influence of heat treatment on fatigue response is attributed to the predominance of the microporosity in fatigue crack initiation in cast aluminum.     

Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.     

The effects of a monetary alternative on marijuana self-administration

We have used a variety of methods to characterize the genome of the archaeon Methanosarcina thermophila TM-1. Pulsed-field gel analysis indicates a genome size of 2.8 Mb. We have constructed a bacterial artificial chromosome (BAC) library of M. thermophila and have used it to generate physical maps for this organism. The library is made up of 384 clones with an average insert size of 58 kb representing 8.0 genome equivalents. The utility of the library for low-resolution physical mapping was shown by identifying NotI linking clones and using these to order the NotI macrorestriction fragments of M. thermophila into a 2.8 Mb map. Hybridization of nine single copy genes and a 16S rRNA sequence to these macrorestriction fragments forms the basis for the first genetic map in this organism. High-resolution physical maps, consisting of overlapping clones, have been created using HindIII fingerprints of BAC clones. In this way, we identified a minimal path of five clones that span a 270 kb NotI fragment. The ease of manipulating BAC clones makes the BAC system an excellent choice for the construction of low-resolution and high-resolution physical and genetic maps of archaeal genomes. It also provides a substrate for future genome-sequencing efforts.     

Pulsed phase-locked loop calibration over frequency

This paper presents a method of correcting for unwanted phase shifts introduced by interchanging ultrasonic transducers and other measurement system components when using the pulsed phase-locked loop (PPLL) ultrasonic system. Theory is derived mathematically separating phase errors into their constituents. The relationship to a previously derived method of determining the number of periods into the tone-burst, at which the system samples, is established, and a method of adjusting this number to be an integer is presented. Implementation of the technology on a computer is demonstrated through experimental results on transducers of differing frequencies and diameters. Sensitivity to path-length is tested. This work has resulted in a straightforward means of calibrating transducers in conjunction with PPLL measurements using a single, fixed reference block