Water soluble acrylamide polymers, 2. Aging and viscous flow of aqueous solutions of polyacrylamide and hydrolyzed polyacrylamide

The aging of aqueous solutions of polyacrylamide which appears experimentally as a decrease of solution viscosity and which is probably caused by microorganisms may be prevented by the addition of a small amount (0.02 wt.-%) of an antimicrobial agent such as sodium azide. Aluminium chloride causes a very strong decrease of the viscosity during a prolongated storing time. The addition of aluminium ions to the polymer solution leads to a complexing of amidic groups with aluminium cations and probably also to decrease of the dimensions of individual polymer coils. The viscous flow of aqueous solutions of polyacrylamide and hydrolyzed polyacrylamides was studied as a dependence of the shear gradient D on the shear stress τ and was described by the relation D = k · τⁿ, where k and n denote constants. Both constants depend on the polymer concentration, the degree of polymerization and the content of carboxylic groups in the polymer. The greatest deviations from the Newtonian behaviour were found in the range of molecular weights over 2 · 10⁶ g/mol and practically no deviations were observed for polyacrylamide with molecular weights below 1 · 10⁶ g/mol. The dependence of the viscosity on the shearing time at different shear rates (300, 600 and 1200 s^?1) which was observed in solutions of polyacrylamide, hydrolyzed polyacrylamide and poly-(N,N-dimethyl)-acrylamide was explained by an entanglement model.     

Preparation of TiO2 epoxy nanocomposites by ultrasonic dispersion and resulting properties

Nanocomposites gained more and more importance in the last few years because of their improved performance over the neat polymer matrix, that is, toughness and stiffness can be enhanced simultaneously by the addition of nanoparticles. However, the dispersion of these particles in the matrix remains a big challenge. In this study, two types of TiO₂ nanoparticles were dispersed in two different epoxy resins by means of ultrasound. The particle size development in dependence on the dispersion time was investigated by dynamic light scattering for the different material systems. Furthermore, the influence of the viscosity on the sonication process' efficiency was analyzed. The resulting nanocomposites were tested for fracture and Charpy toughness. SEM images revealed that the improved fracture toughness properties are correlated to a rougher fracture surface, whose formation dissipates more energy. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Rheological characterization of polypropylene/poly(ethylene-<Emphasis Type="Italic">co</Emphasis>-propylene) in-reactor blends synthesized under different polymerization conditions

In-reactor blends of polypropylene/poly(ethylene-co-propylene) with complex microstructure, synthesized through different polymerization procedures; two-step (one homopolymerization and one copolymerization under high ethylene concentration) and three-step (with an additional copolymerization step under low ethylene concentration), were characterized by rheological measurements. The effects of a change in the polymerization process on the types and amounts of block copolymers in the blends were evaluated using small amplitude oscillation rheometry in the linear viscoelastic region. The Palierne model in its complete form was employed to model the rheological behavior of the blends. For this analysis the reactor products were separated into xylene cold insoluble (XCI) and xylene cold soluble fractions. Besides, another two copolymer fractions at 80 and 100 °C, which are crystallizable copolymer fractions and contain block copolymers rich in polyethylene and polypropylene, respectively, were separated from XCI fraction by xylene using temperature gradient elution fractionation method. Considering all copolymer fractions as dispersed and the remained fraction (mostly polypropylene) as matrix phase, it was shown that the rheological properties of the blends could not be predicted by Palierne model. It was found that only by considering part of block copolymer fractions having long polypropylene sequences along with polypropylene homopolymer as one phase, the rheological properties of the blends could be predicted by Palierne model. By rheological modeling, it was confirmed that the amounts of copolymers with long polypropylene sequences which are miscible with the matrix are higher in the case of three-step blends and also the elasticity of three-step polymerized blends is higher than two-step polymerized blends.     

Iron‐Catalyzed Cross‐Coupling of 1‐Alkynylcyclopropyl Tosylates and Related Substrates

1‐Alkynylcyclopropyl tosylates react with alkylmagnesium halides in the presence of catalytic ferric acetylacetonate [Fe(acac)₃] under net propargylic substitution; allene formation, which is the prevalent reactivity mode of propargylic substrates otherwise, was noticed as a side reaction only when branched alkyl‐ or aryl‐Grignard reagents were used. These transformations represent the first successful iron‐catalyzed cross‐coupling reactions of tert‐alkyl electrophiles.

     

Dispersion of TiO2 Particles in PET/PP/TiO2 and PET/PP/PP‐g‐MA/TiO2 Composites Prepared with Different Blending Procedures

2 vol.‐% TiO₂ particles were incorporated into PET/PP blends with and without MA‐grafted PP compatibilizer. During extrusion of the PET/PP/TiO₂ composites the TiO₂ particles migrated from the PP matrix to the PET‐dispersed phase irrespective of the blending route. For the PET/PP/PP‐g‐MA/TiO₂ composites, however, the location of TiO₂ depended on the blending sequence. The preferred location of the TiO₂ nanoparticles was confirmed by SEM pictures taken from the chemically etched surface of the blends. The observed migration behavior was traced to differences in the interfacial tensions between TiO₂ and PET and TiO₂ and PP, and to TiO₂ encapsulation in one of the blend components during the related blending procedure.

     

Die Wasserkraftschnecke – Praxis, Prüfstand und Potenzial

Since 2001 Archimedean screws have been used for commercial power generation. However, due to a lack of distribution, this comparatively new, ultra-low-head technology is essentially still a niche product. This work examines their potential, combining an operator survey, field measurements as well as laboratory tests. In extensive lab experiments, efficiencies were measured and compared for seven different screw types at varying speed-to-flow-rate combinations and inclination angles. Here, both excellent efficiencies and the impact of different parameters were observed and significant potential for improvement on the state of the art was found. This article summarizes the area of application, practical experience to date, and the latest developments concerning this highly efficient, low-maintenance, and ecologically promising low-head technology. In doing so, it also provides a well-founded basis for decision-making involving turbine selection at small hydropower sites.