Modelling of the viscoelastic behaviour of amorphous thermoplastic/glass beads composites based on the evaluation of the complex Poisson's ratio of the polymer matrix

A series of polystyrene/glass beads composites were studied by using dynamic mechanical spectrometry. From experimental data obtained under isothermal conditions, a simulation method of viscoelastic behaviour of amorphous thermoplastics reinforced by glass beads was devised. Such a theoretical approach confirmed the requirement of considering the Poisson's ratio as a complex component over all the temperature range. This could be related to the difference of many powers of ten between the moduli of the two phases. Thus, we suggest in this paper a method to evaluate the complex Poisson's ratio of the matrix. From these results, the influence of filler content on the magnitude of the mechanical relaxation related to the glass transition is taken into account.     

Performance of a stand-alone renewable energy system based on energy storage as hydrogen

Electrolytic hydrogen offers a promising alternative for long-term energy storage of renewable energy (RE). A stand-alone RE system based on energy storage as hydrogen has been developed and installed at the Hydrogen Research Institute, and successfully tested for autonomous operation with developed control system and power conditioning devices. The excess energy produced, with respect to the load requirement, has been sent to the electrolyzer for hydrogen production. When energy produced from the RE sources became insufficient, with respect to the load requirement, the stored hydrogen was fed to a fuel cell to produce electricity. The RE system components have substantially different voltage-current characteristics and they are integrated through power conditioning devices on a dc bus for autonomous operation by using a developed control system. The developed control system has been successfully tested for autonomous operation and energy management of the system. The experimental results clearly indicate that a stand-alone RE system based on hydrogen production is safe and reliable.     

Class D amplifier for a power piezoelectric load

We present a high efficiency inverter (>90%) that can drive an acoustic cavitation reactor with a 2 kW power between 10 and 100 kHz. This reactor is composed of numerous piezoelectric transducers and is particularly used to accelerate various industrial chemical reactions and destroy a variety of organic contaminants in water. The class-D amplifier or inverter is composed of power MOSFETs, type IRFP460, in a full bridge configuration driven by IR2110 circuits in bootstrap mode. The specific nature of the problem comes from the fact that, at frequencies slightly different from a resonant frequency frn, the load is mostly capacitive. The insertion of an appropriate low-pass filter in front of the load allowed an efficient solution to the problem due to the load being capacitive for harmonics. The realized system can provide nearly 2 kW to this type of piezoelectric load, with an efficiency of more than 95%     

Tracking maximum efficiency of hydrogen genset used as electric vehicle range extender

This paper investigates a hydrogen-based genset maximum efficiency tracking problem in the context of electric vehicle range extension. This genset is cheaper than fuel cells and has the desirable property of being greenhouse gas emission free in addition to being less pollutant than the conventional gasoline based gensets. Using Taylor's series, a parametric efficiency model is built iteratively. This model is used by a nonlinear optimization method which searches for the optimal operating conditions for a maximum achievable efficiency. The root-mean-square-error between experimental data and the model is less than 5 × 10⁻⁴. The hardware-in-the-loop simulation demonstrated that the proposed tracking approach is effective. In addition, it can improve the hydrogen-based genset efficiency up to 7.15% compared to the commonly used industrial method based on a constant speed drive approach.     

Nonlinear model identification of wind turbine with a neural network

A nonlinear model of wind turbine based on a neural network (NN) is described for the estimation of wind turbine output power. The proposed nonlinear model uses the wind speed average, the standard deviation and the past output power as input data. An anemometer with a sampling rate of one second provides the wind speed data. The NN identification process uses a 10-min average speed with its standard deviation. The typical local data collected in September 2000 is used for the training, while those of October 2000 are used to validate the model. The optimal NN configuration is found to be 8-5-1 (8 inputs, 5 neurons on the hidden layer, one neuron on the output layer). The estimated mean square errors for the wind turbine output power are less than 1%. A comparison between the NN model and the stochastic model mostly used in the wind power prediction is done. This work is a basic tool to estimate wind turbine energy production from the average wind speed.     

Thermal optimization of solar dish collector for indirect vapor generation

This work presented the performance analysis of a solar parabolic concentrator prototype. The purpose of this paper is to achieve most quantity of vapor production with different water flows. The principal component of the solar concentrator is a new absorber concept that absorbs reflected solar rays and transports it to a heat exchanger in order to generate vapor. Climatic conditions, inlet/outlet oil temperatures of the tubular solar heat exchanger, water tank temperature, and inlet/outlet water temperatures of the mixed heat exchanger were recorded experimentally during three days in November 2018. The absorbed energy, losses energy, concentrated energy, and vapor heat energy of the system were determined. Results of this work, the solar system provides thermal energy efficiency varied from 60% to 70% and a concentration factor around 350 for three water mass flow rates. In this experiment, the optimum value of vapor mass is 6 kg/h with 0.016 kg/s of water flow. Consequently, to achieve the most quantity of vapor, the water flow should be decreased.     

Improved modeling of permittivity measurement cells

The impedance of metallic cavity, which contains a material, the complex permittivity of which is ϵ*, is a rational functional of the complex variable (ϵ*-ϵ₀,/ϵ₀). Since the poles and the residuals of this function are all real, it can be written as a ratio of two polynomials, with real coefficients. The degrees of the polynomials can be chosen so that the experimental values fit the theory with a desired accuracy. It is shown that formulas of this type can be used for calibrating any dielectric measurement cell, avoiding the establishment of an equivalent circuit of the cell     

Fracture mechanisms and mechanics of an 18-4-1 high speed steel

Cast, wrought, and directly sintered smooth and precracked beam specimens of BT1 steels were studied in three- and four-point bending at room temperature. Following austenitization at 1250° C and tempering between 500 and 560° C, brittle fracture strengths varied between 1.1 and 2.8 GN m^–2 and the fracture toughness of the materials was in the range 18 to 25 MN m^–3/2. Combining these data, the critical Griffith-Irwin flaw sizes were calculated to be typically of the order of 100 m. This is in reasonable agreement with the observed sizes of some failure-initiating sites, particularly pores in sintered material, but generally several times larger than the carbide and grain sizes. In wrought specimens, failure frequently originated from groups of carbides, apparently fracturing on contiguous planes. No evidence of sub-critical cracking of carbides was detected (as in BT42), in contrast to BM2, BT6 and sintered and hot isostatically pressed BT1. Only inter-powder particle parting occurred in this sintered material. Conventional fracture mechanics thus successfully interprets results on sintered specimens, but only on several of the wrought specimens. For the majority of the latter it appears necessary to invoke operation of propagation mechanisms involving short, 10 m, cracks under monotonic loading or to associate the brittle fracture stress with that for crack nucleation: e.g. cleavage of a carbide cluster.     

Combining hill-placed manure and mineral fertilizer enhances maize productivity and profitability in northern Benin

Throughout much of Sub-Saharan Africa (SSA), maize production is characterized by low productivity due to the scarce availability and use of external inputs and recurrent droughts exacerbated by climate variability. Within the integrated soil fertility management (ISFM) framework, there is thus a need for optimizing the application of fertilizers and manure to better use the limited nutrient resources and increase crop yield and farmer income. An on-station experiment was conducted in Northern Benin over a 4-year period to evaluate the effect of hill placement of mineral fertilizer and manure on maize yields and soil chemical properties. The treatments consisted in the combination of three rates of manure (0 (NM), 3 (3M) and 6 (6M) Mg ha^?1) and three levels of fertilizer (0% (NF), 50% (50F) and 100% (100F) of the rate recommended by extension (76 kg N + 13.1 kg P + 24.9 K ha^?1)). On average across the fertilizer rates, hill-placement of manure significantly improved soil organic carbon content, available P and exchangeable K after 4 years by up to 124, 166 and 77%, respectively, compared to the initial values. As a result of the nutrient inputs and improved soil properties, yields increased steadily over time for all manure and fertilizer combinations. Value-cost ratios and benefit–cost ratios were >2 and generally as good or even better for treatments involving 50F compared to NF or 100F. Although applying half the recommended rate of fertilizer without manure as currently done by many farmers appears to make economic sense, this practice is unlikely to be sustainable in the long term. Substituting 50F for 3M or complementing 50F with 3M are two possible strategies that are compatible with the precepts of ISFM and provide returns on investment at least as good as the current practice. However, this will require greater manure production, made possible in part by the increased stover yields, and access to means of transportation to deliver the manure to the fields.