Azomesogens with 1,2,4-trisubstituted benzene moiety

New mesogenic homologous series having an azo central linkage was synthesized by fixing a rigid 4-methyl phenyl azo group to resorcinol moiety. The terminal and lateral phenolic -OH groups were esterified, one by one, with 4-n-alkoxybenzoyl and acetyl group, respectively. All the twelve homologues synthesized exhibit mesomorphism. The methoxy ton-decyloxy andn-hexadecyloxy derivatives exhibit monotropic nematic mesophase whereas,n-dodecyloxy andn-tetradecyloxy derivatives exhibit enantiotropic nematic mesophase. The mesogenic properties of the present series was compared with those of other structurally related mesogenic series. Paper presented at the 5th National Seminar on Liquid Crystals, University of Jammu, Jammu, December 1997.     

In vivo purging with high-dose cytarabine followed by high-dose chemoradiotherapy and reinfusion of unpurged bone marrow for adult acute myelogenous leukemia in first complete remission

PURPOSE: To evaluate in a prospective study the efficacy of autologous bone marrow transplantation (BMT) in adult patients with acute myelogenous leukemia (AML) in first remission, using a single course of high-dose Cytarabine (HD Ara-C) consolidation therapy as in vivo purging. PATIENTS AND METHODS: Sixty consecutive adult patients with AML in first complete remission (CR) were treated with HD Ara-C consolidation therapy as a method of in vivo purging before marrow collection. High-dose therapy consisted of fractionated total-body irradiation (FTBI) 12 Gy, intravenous etoposide 60 mg/kg, and cyclophosphamide 75 mg/kg, followed by reinfusion of cryopreserved marrow. RESULTS: Sixty patients underwent consolidation treatment with HD Ara-C with the intent to treat with autologous BMT. Sixteen patients were unable to proceed to autologous BMT (10 patients relapsed, one died of sepsis, one developed cerebellar toxicity, two had inadequate blood counts, and two refused). Forty-four patients underwent autologous BMT and have a median follow-up time of 37 months (range, 14.7 to 68.7) for patients who are alive with no relapse. The cumulative probability of disease-free survival (DFS) at 24 months in the intent-to-treat group is 49% (95% confidence interval [CI], 37% to 62%) and in those who actually underwent autologous BMT is 61% (95% CI, 46% to 74%). The probability of relapse was 44% (95% CI, 31% to 58%) and 33% (95% CI, 20% to 49%) for the intent-to-treat and autologous BMT patients, respectively. CONCLUSION: This approach offers a relatively high DFS rate to adult patients with AML in first CR. The results of this study are similar to those achieved with allogeneic BMT.     

Electroless Plating of Copper on Fluorinated Polyimide Films Modified by Plasma Graft Copolymerization and UV‐induced Graft Copolymerization with 4‐Vinylpyridine

Surface modification of two types of fluorinated polyimide (FPI) films, either by plasma polymerization and deposition of 4‐vinylpyridine (4VP) or by UV‐induced graft copolymerization with 4VP under atmospheric conditions, was carried out for adhesion enhancement with the electrolessly deposited copper. X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) results revealed that the pyridine groups in the plasma polymerized 4VP (pp‐4VP) layer could be preserved to a large extent under proper glow discharge conditions. The grafted 4VP layer with well‐preserved pyridine groups was used not only as the chemisorption sites for the palladium complexes (without the need for prior sensitization by SnCl₂) during the electroless plating of copper, but also as an adhesion promotion layer for the electrolessly deposited copper. The T‐peel adhesion strength of the electrolessly deposited copper with both the 4VP plasma‐polymerized FPI (pp‐4VP‐FPI) film and the 4VP graft‐copolymerized FPI (4VP‐g‐FPI) film was much higher than that of the electrolessly deposited copper with the pristine or the Ar plasma‐treated FPI films. The high adhesion strength between the electrolessly deposited copper and the surface‐modified FPI film was attributed to the fact that the plasma‐polymerized and the UV graft‐copolymerized 4VP chains were covalently tethered on the FPI surfaces, as well as the fact that these grafted 4VP polymer chains were spatially and reactively distributed into the copper matrix.

     

Assessment of waste plastic oil blends on performance,combustion and emission parameters in direct injection compression ignition engine

The present experimental investigation deals with the transformation of waste plastic into oil in a pyrolysis reactor. A single feed at a rate of 8?kg yielded 675?ml of pyrolytic oil. The physiochemical properties of plastic oil (PO) were found to be within American Society for Testing and Material standards with higher kinematic viscosity and carbon residue. The GC-MS and Fourier Transform Infrared Analysis studies revealed the presence of 14 different compounds in PO. Straight diesel–PO blending was carried out at 15% and 30% in volume ratio. At full-load condition, in-cylinder pressure, rate of pressure rise, rate of heat release and peak pressure were higher for PO30% than straight diesel. The brake thermal efficiency for PO blends was found to be slightly higher than straight diesel with a significant increase in brake-specific fuel consumption. Unburned hydrocarbon (UBHC), CO NO _x and smoke emission showed significant variation with PO blends. The physiochemical properties of PO blends significantly affect the engine performance.     

Estimation of the Kubelka—Munk scattering coefficient from single particle scattering parameters

Computer colour matching of paints is based on the determination of the Kubelka—Munk absorption (K) and scattering coefficients (S) of pigments. K and S are sensitive to particle size in the range of sizes employed in paint technology. The K—M theory does not provide any guidelines for the correction of the values of K and S with a change in particle size. On the other hand the Mie theory linear scattering coefficient can be calculated from a knowledge of size and refractive index of the pigment. A number of relations correlating the K—M scattering coefficient and the linear scattering coefficient have been proposed in the literature. Attempts are made to estimate the K—M scattering coefficient using a relation suggested by Mudgett and Richards and to make a comparison with experimental values. The Mie theory equations being complex, simplified equations applicable to pigment sizes for the calculation of Mie theory parameters are proposed. The viability of the simplified equations has been established by comparing the results with those obtained using the full Mie equations.The K—M scattering coefficient for titanium dioxide pigments has been determined from reflectance measurements. The particle size of titanium dioxide has been determined by a light scattering method. The K—M scattering coefficient calculated from the linear scattering coefficient obtained using the simplified expressions agrees with experimental results. This suggests a method for the correction of the values of K and S with changes in pigment particle size.     

Superconducting State Parameters of (Ni33Zr67)1?xMx (M = Ti, V, Co, Cu) Ternary Amorphous Superconductors

The theoretical investigations of the superconducting state parameters (SSP) viz. electron-phonon coupling strength λ, Coulomb pseudopotential μ ^∗, transition temperature T _C , isotope effect exponent α and effective interaction strength N _O V of (Ni₃₃Zr₆₇)_1−x M _x (M=Ti,V,Co,Cu) ternary amorphous superconductors have been reported using Ashcroft’s empty core (EMC) model potential. Five different types of local field correction functions proposed by Hartree (H), Taylor (T), Ichimaru-Utsumi (IU), Farid et al. (F) and Sarkar et al. (S) are used in the present investigation to study the screening influence on the aforesaid properties. The T _C obtained from Sarkar et al. (S) local field correction function are found in excellent agreement with available theoretical data. Quadratic T _C equation has been proposed, which provides successfully the T _C values of ternary amorphous alloys under consideration. Also, the present results are found to be in qualitative agreement with other such earlier reported data, which confirms the superconducting phase in the superconductors.     

Primary binding domain of bovine von Willebrand factor fragment expressed in E. coli

Bovine vWF cDNA has been cloned from a bovine endothelial cell library. A fragment of this cDNA, corresponding to amino acid sequence Leu 469-Ser 723, called primary adhesion domain (PAD-1), and containing the binding sites for platelet glycoprotein Ib (GPIb), heparin and collagen, has been expressed in E. coli. The reduced and alkylated form of fragment PAD-1 inhibited native vWF binding to GPIb. Fragment PAD-1 bound to heparin and botrocetin in a specific and dose dependent manner as did the native vWF. In a solid-phase assay, fragment PAD-1 bound to calf skin collagen in contrast to a human vWF recombinant fragment (Ser 445-Val 733) which was inactive in the same assay. The studies presented in this paper demonstrated that the A1 domain of bovine vWF contained the GPIb, heparin, botrocetin as well as collagen binding sites and that integrity of the disulfide bond (Cys 509-Cys 695), did not seem to be essential for binding of bovine vWF fragment to GPIb.     

Fabrication of support structures to prevent SU-8 stiction in high aspect ratio structures

We have previously demonstrated that it is possible to fabricate densely-packed high aspect ratio structures in SU-8 by means of a top-plate support member which stiffens the overall structure and prevents pattern collapse. In this work we have computed the tensile stresses induced in the top-plate structures due to the capillary forces that arise between the columns due to the surface tension of the drying liquid. We have further studied the dynamic behavior of the structure after an instantaneous force. Based on these results, we have shown that the predicted optimal thickness of the top-plate structure is sufficient to maintain structural integrity.