A Novel Self-Organizing Approach to Automatic Traffic Light Management System for Road Traffic Network

Wireless Personal Communications - Traffic network is basically a “network of networks” consisting of mainly two types of networks: road network and a travel network. Due to drastic...     

A fuzzy logic system for channel equalization

We present a new method for channel equalization using fuzzy logic. The membership functions are derived from the training data set, and a method to estimate the delay of the communication channel is proposed. The performance of the fuzzy equalizer is compared with that of a transversal filter equalizer. It is shown using simulations that the transversal filter requires a much larger training set to achieve the same error rate. It is also shown, using simulations, that the fuzzy equalizer performs better in the presence of channel nonlinearities     

Thermal treatment effect on nanostructured TiO2 films deposited using diethanolamine stabilized precursor sol

A clear ethanol based precursor sol obtained using diethanolamine has been utilized for the deposition of TiO₂ films annealed at different temperatures. The influence of annealing temperature on the structural, optical and electrochemical properties of TiO₂ thin films has been examined. Diethanolamine stabilizes the precursor sol due to its chelate forming ability with the alkoxides. It reacts as a tridentate ligand with the titanium isopropoxide. The threshold for the onset of crystallization in the films is identified at a temperature of 300 °C. The SEM study on the films elucidates segregation of irregularly shaped features into finer round clusters as a function of annealing temperature. As determined from the AFM study, the roughness parameter in the films has shown an increase with the annealing temperature. Photoluminescence measurements have given an indirect evidence for the presence of stoichiometric titanium oxide in the films. An optimum crystallite size and high ion storage capacity in the 300 °C annealed film has led to its superior electrochromic activity with the transmission modulation and coloration efficiency of the same film being 42% and 8.1 cm² C⁻¹, respectively at 550 nm. The highest degree of porosity in the 300 °C annealed film as established from the SEM study is also the reason behind its best electrochromic performance. In addition, the 300 °C annealed film also exhibits the fastest coloration switching kinetics.     

A Deep Learning Approach to Detection and Mitigation of Distributed Denial of Service Attacks in High Availability Intelligent Transport Systems

Mobile Networks and Applications - In the era of Internet of Things (IoT) powered by 5G technologies, Automobile Industry is headed towards a revolution. In Intelligent Transport Systems (ITS),...     

Three dimensional reconstruction of coronary arteries from two views

Geometric representation and measurements of localized lumen stenosis of coronary arteries are important considerations in the diagnosis of cardiovascular diseases. This discrete narrowing of the arteries typically impairs blood flow in regions of the heart, and can be present along the entire length of the artery. Three-dimensional (3-D) reconstruction of coronary arterial tree allows clinician to visualize vascular geometry. Three-dimensional representation of tree topology facilitates calculation of hemodynamic measurements to study myocardial infarction and stenosis. The 3-D arterial tree, computed from two views, can provide more information about the tree geometry than individual views. In this paper, a 3-step algorithm for 3-D reconstruction of arterial tree using two standard views is presented. The first step is a multi-resolution segmentation of the coronary vessels followed by medial-axis detection along the entire arterial tree for both views. In the second step, arterial trees from the two views are registered using medial-axis representation at the coarsest resolution level to obtain an initial 3-D reconstruction. This initial reconstruction at the coarsest level is then modified using 3-D geometrical a priori information. In the third step, the modified reconstruction is projected on the next higher-resolution segmented medial-axis representation and an updated reconstruction is obtained at the higher resolution. The process is iterated until the final 3-D reconstruction is obtained at the finest resolution level. Linear programming based constrained optimization method is used for registering two views at the coarse resolution. This is followed by a Tree-Search method for registering detailed branches at higher resolutions. The automated 3-D reconstruction method was evaluated on computer-simulated as well as human angiogram data. Results show that the automated 3-D reconstruction method provided good registration of computer-simulated data. On human angiogram data, the computed 3-D reconstruction matched well with manual registration.     

Simultaneous MSMR and SSM/I observations and analysis of sea‐ice characteristics over the Antarctic region

Polar sea ice has been monitored quasi‐continuously over the last 30 years using passive microwave radiometers onboard three satellites in polar orbit, namely Nimbus‐5, Nimbus‐7 and Defense Meteorological Satellite Program (DMSP) series. A short overlap between Scanning Multichannel Microwave Radiometer (SMMR) on Nimbus‐7 and Special Sensor Microwave Imager (SSM/I) onboard DMSP allowed inter‐calibration of the two sensors leading to a consistent series of long‐term sea‐ice measurements since 1978. With the launch of Multifrequency Scanning Microwave Radiometer (MSMR) onboard OCEANSAT‐1 in the polar sun‐synchronous orbit during 1999, India developed the capability to monitor the polar sea ice on a regular basis. The concurrent availability of SSM/I and MSMR over the last few years presents a valuable opportunity to attempt an inter‐comparison of MSMR with SSM/I measurements and derived sea‐ice parameters.

In this paper, we present an indirect validation of the brightness temperatures (T _b) observed by MSMR with near‐simultaneous measurements from SSM/I over the Antarctic and Southern Polar Ocean regions. Simultaneous MSMR and SSM/I data from two contrasting seasons—summer and winter—for the 1999–2000 period have been used. Analysis includes a comparison of T _b scatterograms to achieve confidence in the quantitative use of the T _b data to derive various geophysical parameters, e.g. sea‐ice concentration and extent. Additionally, the T _b images produced by the two sensors are compared to establish the capability of MSMR in reliable two‐dimensional portrayal of all the sea and continental ice features over the Antarctic Region. Based on a regression analysis between MSMR observed T _b in different frequency channels and polarizations, and SSM/I‐derived sea‐ice concentration (SIC) values, we have developed algorithms to estimate SIC over the Southern Polar Ocean from MSMR data. The MSMR algorithms allow estimation of SIC with better than 10% rms error. MSMR SIC images faithfully capture the observed distribution of sea ice in all the sectors of the Southern Ocean both during summer and winter periods. Using the MSMR‐derived SIC, we have also derived monthly sea‐ice extent (SIE) estimates for a period extending for about 20 months from the beginning of the launch of MSMR. These estimates show excellent agreement with values derived from SSM/I. These analyses bring out the very high level of compatibility in the measurements and derived sea‐ice parameters produced by the two sensors.     

Characterization of purified fungal endoxylanase and its application for production of value added food ingredient from agroresidues

Xylanase from Aspergillus foetidus MTCC 4898 was purified using ammonium sulphate fractionation followed by ion exchange and gel permeation chromatography with 12.26-fold purity and 29.9% recovery. Purified xylanase was found to be 29.9 kDa. Optimum temperature and pH for xylanase activity of purified xylanase were found to be 50 °C and 5.3 respectively. Presence of additives like polyethylene glycol, sodium azide, Tween 80, KCl and NaCl increased the stability of purified xylanase by 35, 29, 28, 32 and 43% respectively at 50 °C after 180 min. Kinetic parameters like K_m and V_max were found to be 4 mg/ml and 7288 μmol/mg/min respectively. The purified xylanase was found to be an endoxylanase as it produced only xylooligosaccharides (XOS) from birchwood xylan. Production of XOS was carried out from xylan extracted from agro-residues using β-xylosidase free xylanase. Maximum yield of XOS was 7.28 ± 0.14 mg/ml and 4.52 ± 0.21 mg/ml from wheat straw xylan and rice straw xylan respectively. XOS mixture was suitable for food industry looking at its high thermal stability at low pH. Prebiotic effect of XOS was evaluated by in vitro fermentation of XOS using known probiotic strains of Bifidobacterium spp.     

Electrical Conductivity Studies of AgCl:KCl (RbCl, CsCl) Composites and a Novel Method of Obtaining Highly Porous Materials

Two phase systems consisting of AgCl and KCl (or RbCl, CsCl) have been studied with respect to morphology and electrical properties. As expected from the contact of such Frenkel and Schottky disordered ionic conductors, substantial enhancement effects were not observed. In the case of AgCl:KCl, eutectic lamellar structures have been obtained and their conductivities measured using both macroscopic electrodes as well as microelectrodes. Leaching the alkali chloride out of the lamellar composite leads to a porous solid network. Potential applications of such microporous ionic silver halides as a gas sensor as well as a solid envelope for liquid electrolytes are considered.     

Room temperature synthesis of highly hemocompatible hydroxyapatite, study of their physical properties and spectroscopic correlation of particle size

Needle shaped nanoparticles of hydroxyapatite (HA) have been synthesized at room temperature using orthophosphoric acid as the source of (PO4)3- ions, while calcium chloride, the calcium source, is suitably complexed with citric acid/tartaric acid/acetic acid. The presence of ligands inhibits the growth along [001] and [100] directions of the crystal and thus, helps in formation of needle shaped nanoparticles. The chemical compositions of the samples have been established through AAS and FTIR spectroscopy, while the crystallinity has been assessed through XRD and by the spectral changes in the υ1 and υ3 frequencies of the phosphate group in the respective FTIR spectra. The particle sizes of the samples have been determined from line broadening studies and correlations have been established between the curve fitted percentage area of FTIR and full width half height (FWHH) of the XRD peaks. TEM studies revealed the particle to be needle-shaped with a length and diameter in the range of 20-65 nm and 4-11 nm respectively. Changes in the surface charge of the water dispersed HA samples have been determined at different pH and the isoelectric point for the samples have been found in the range of 3.1-3.4. Finally, the morphology, surface area and hemocompatibility characteristics of the HA samples, prepared by using different complexing agents, have been compared.