Surface Reconstruction Engineering with Synergistic Effect of Mixed-Salt Passivation Treatment toward Efficient and Stable Perovskite Solar Cells

Surface passivation treatment is a widely used strategy to resolve trap-mediated nonradiative recombination toward high-efficiency metal-halide perovskite photovoltaics. However, a lack of passivation with mixture treatment has been investigated, as well as an in-depth understanding of its passivation mechanism. Here, a systematic study on a mixed-salt passivation strategy of formamidinium bromide (FABr) coupled with different F-substituted alkyl lengths of ammonium iodide is demonstrated. It is obtained better device performance with decreasing chain length of the F-substituted alkyl ammonium iodide in the presence of FABr. Moreover, they unraveled a synergistic passivation mechanism of the mixed-salt treatment through surface reconstruction engineering, where FABr dominates the reformation of the perovskite surface via reacting with the excess PbI₂. Meanwhile, ammonium iodide passivates the perovskite grain boundaries both on the surface and top perovskite bulk through penetration. This synergistic passivation engineer results in a high-quality perovskite surface with fewer defects and suppressed ion migration, leading to a champion efficiency of 23.5% with mixed-salt treatment. In addition, the introduction of the moisture resisted F-substituted groups presents a more hydrophobic perovskite surface, thus enabling the decorated devices with excellent long-term stability under a high humid atmosphere as well as operational conditions.     

In situ observation of synthesized nanoparticles in ultra-dilute aerosols via X-ray scattering

In-air epitaxy of nanostructures (Aerotaxy) has recently emerged as a viable route for fast, large-scale production. In this study, we use small-angle X-ray scattering to perform direct in-flight characterizations of the first step of this process, i.e., the engineered formation of Au and Pt aerosol nanoparticles by spark generation in a flow of N₂ gas. This represents a particular challenge for characterization because the particle density can be extremely low in controlled production. The particles produced are examined during production at operational pressures close to atmospheric conditions and exhibit a lognormal size distribution ranging from 5–100 nm. The Au and Pt particle production and detection are compared. We observe and characterize the nanoparticles at different stages of synthesis and extract the corresponding dominant physical properties, including the average particle diameter and sphericity, as influenced by particle sintering and the presence of aggregates. We observe highly sorted and sintered spherical Au nanoparticles at ultra-dilute concentrations (< 5 × 10⁵ particles/cm³) corresponding to a volume fraction below 3 × 10^–10, which is orders of magnitude below that of previously measured aerosols. We independently confirm an average particle radius of 25 nm via Guinier and Kratky plot analysis. Our study indicates that with high-intensity synchrotron beams and careful consideration of background removal, size and shape information can be obtained for extremely low particle concentrations with industrially relevant narrow size distributions.

     

A new method for manufacturing nanostructured electrodes on glass substrates

The present paper describes a new method for manufacturing a nanostructured porous layer of TiO₂ on a conducting glass substrate for use in a dye-sensitized photoelectrochemical cell. The method involves deposition of a layer of semiconductor particles onto a conducting substrate and compression of the particle layer to form a mechanically stable, electrically conducting, and porous nanostructured film at room temperature. Photoelectrochemical characteristics and morphology of the resulting nanostructured films are presented. The potential use of the new manufacturing method in the future applications of nanostructured systems is discussed.     

Relating catalyst structure and composition to the water–gas shift activity of Cu–Zn-based mixed-oxide catalysts

In order to investigate the effect of cerium oxide on Cu–Zn-based mixed-oxide catalysts four catalyst samples were characterized by means of XRD, in situ XANES and thermogravimetric analysis. The activity of the catalyst samples was tested for the forward water–gas shift reaction. Cerium oxide was found to increase the crystallinity of the ZnO phase indicating a segregation of the Cu and ZnO phases. The TOF of the water–gas shift reaction based on chemisorption data was found to be independent of composition and preparation conditions of the four catalyst samples. In contrast, the catalyst stability depends on composition and preparation conditions. Cerium oxide impregnated before calcination of the hydrotalcite-based Cu–Zn precursors leads to a more stable water–gas shift catalyst.     

Peirce algebras

We present a two-sorted algebra, called aPeirce algebra, of relations and sets interacting with each other. In a Peirce algebra, sets can combine with each other as in a Boolean algebra, relations can combine with each other as in a relation algebra, and in addition we have both a set-forming operator on relations (the Peirce product of Boolean modules) and a relation-forming operator on sets (a cylindrification operation). Two applications of Peirce algebras are given. The first points out that Peirce algebras provide a natural algebraic framework for modelling certain programming constructs. The second shows that the so-calledterminological logics arising in knowledge representation have evolved a semantics best described as a calculus of relations interacting with sets.     

Separate assessment of porosity and uncombined carbon in cemented carbides

Porosity and uncombined carbon in cemented carbides are traditionally assessed by comparison to standardized microstructure charts, such as those in ISO 4505-1978. To improve the accuracy in the characterization a fully automatic image analysis procedure has been developed. The analysis is performed using light optical microscopy on unetched polished specimens. The implemented algorithm separates uncombined carbon, C-defects, from pores, A- and B-defects. Pores are approximately distributed in a random way in the structure. Uncombined carbon is on the other hand precipitated into clusters of carbon particles. This difference is together with defect size used as a base for the separation. Small defects situated close together are classified as C-defects, small isolated defects as A-pores and large defects as B-pores. Pores are found to be more round than the somewhat elongated C-defects. The difference in shape is significant and can also be used as a separation criterion.

Image analysis is used to quantitatively characterise the ISO 4505-1978 standard charts with respect to volume fraction, number density and size distribution of defects. The results are compared to measured distributions for true microstructures.     

Sintering high performance semicrystalline polymeric powders

Poly(ether ether ketone) (PEEK) is high performance semicrystalline thermoplastic with a glass transition temperature of 143°C. The melting point (Tm) is quoted as 334°C. Because of its high thermal transitions, PEEK, requires high temperatures for processing, at least 370–400°C. It has been determined that under the recommended processing conditions PEEK can undergo branching and eventually crosslinks. An alternative to melt processing PEEK is to apply the powder metallurgy technique of sintering. This involves cold (room temperature) compaction of the polymeric powder, followed by pressure free sintering of the resultant green body. We have reported a process for preparing submicron PEEK particles, and the focus here is on the free sintering of these particles with emphsis on the effects of particle size, sintering temperature, and compaction pressure. The data is evaluated using the two particle model developed by Frenkel as well as the crack healing theory developed by Wool.     

Paper remote: an augmented television guide and remote control

The television (TV) is one of the most common entertainment devices in homes. Searching and finding TV programs is a common task and using TV guides is one way of performing this. This paper presents three studies that are focused on examining audiences’ TV habits and TV guide usage, evaluating a new concept based on linking paper and pen with TV technology, and studying the audiences’ attitudes toward and anticipated interest in the future guide. The results of our first study emphasize the value of using paper based TV guides and also identify the deficiencies. We also found indications that the advantages and disadvantages of paper-based TV guides are related to the physical properties of paper. Thus, we suggest a solution that uses digital pen and paper technology to offer a new interaction method for TV. A research system “Paper Remote”, is developed and used in the two subsequent studies. Viewers tick designated areas on the paper-based guide to perform actions such as channel switching. However, this solution is not a substitute for the remote control device. We argue that these user studies on linking digital paper to the TV for everyday information navigation illuminate the possibilities of providing innovative solutions also for home information systems also.