Long Distance Enhancement of Nonlinear Optical Properties Using Low Concentration of Plasmonic Nanostructures in Dye Doped Monolithic Sol–Gel Materials

Monolithic sol–gel silica composites incorporating platinum‐based chromophores and various types of gold nanoparticles (AuNPs) are prepared and polished to high optical quality. Their photophysical properties are investigated. The glass materials show well‐defined localized surface plasmon resonance (SPR) absorbance from the visible to NIR. No redshifts of the AuNP plasmon absorption peaks due to the increase in nanoparticle doping concentration are observed in the glasses, proving that no or very small SPR coupling effects occur between the AuNPs. At 600 nm excitation, but not at 532 nm, the AuNPs improve the nonlinear absorption performance of glasses codoped with 50 × 10^?3 m of a Pt‐acetylide chromophore. The glasses doped with lower concentrations of AuNPs (2–5 μm average distance) and 50 × 10^?3 m in chromophore, show a marked improvement in nonlinear absorption, with no or only small improvement for the more highly AuNP doped glasses. This study shows the importance of excitation wavelength and nanoparticle concentration for composite systems employing AuNPs to improve two‐photon absorption of chromophores.     

Repeatability estimates for milk coagulation traits and non-coagulation of milk in Finnish Ayrshire cows

Effects of systematic environmental factors and milk production and quality traits on milk coagulation properties (MCP), and on repeatability of those traits were estimated from 979 milk samples collected once a month over a period of 2 years from 83 Finnish Ayrshire cows. Estimation was based on a multitrait animal model and REML methodology. In addition, persistence of non-coagulation of milk in individual cows, and factors associated with it were established from a sub sample of 24 cows producing non-coagulating (NC) milk at least once. MCP were at their best during the first lactation, at the beginning and at the end of lactation, and during grazing seasons. Variation in MCP with systematic environmental factors was partly due to variation in composition and quality of milk, especially in pH and ln (somatic cell count, SCC). Coefficients of repeatability for milk coagulation time and curd firmness were 0.65 and 0.68. These estimates were of the same magnitude as those for protein content, but were higher than those for daily milk yield, fat content, pH, and SCC. Based on the repeatability estimates for the milk coagulation traits and effects of the environmental factors, cows should be sampled at least three times during a lactation to estimate reliably breeding values for the milk coagulation traits. A total of 10% of the milk samples did not coagulate in 30 min after addition of rennet. Cows that produced NC milk at least once (30% of the cows) could be classified into those that produced NC milk only a few times during a lactation and those that produced NC milk at almost every sampling. Based on logistic regression analyses, peak and mid-lactation, high milk yield, low protein and fat content and high pH increased the risk of non-coagulation of milk.     

Synthesis and optical properties of dyes encapsulated in gold hollow nanoshells

Gold nanomaterials are promising objects for applications in optics and medicine because of their unique properties related to the Surface Plasmon Resonances (SPR) phenomena. It is possible to tune these properties with the control of the size and shape of the nanomaterials. Gold hollow spheres nanomaterials are an interesting concept for encapsulation of either dyes or drugs. The study of their properties and their behavior in a bio-environment still remains scarce and some phenomena are still to be explained in particular regarding local field enhancement effect or quenching of their photophysical properties. In this work we describe a process allowing inclusion of optical dyes in gold nanoshells and evaluate the optical properties.     

Sulphated polysaccharides from Indian samples of Enteromorpha compressa (Ulvales,Chlorophyta): Isolation and structural features

Heteroglycan and xyloglucan rich fractions were extracted from Indian samples of Enteromorpha compressa in 25% yield by sequential extractions with water and alkali. This heteroglycan is sulfated and has an apparent molecular mass of 55 kDa. Chemical structural analysis of this polysaccharide revealed a branched structure having 1,4- and 1,2,4-linked rhamnose 3-sulphate, 1,4-linked glucose, 1,3- and 1,6- linked galactose, 1,4- and terminally linked glucuronic acid and 1,4-linked xylose partially sulfated on O-2. Chemical and spectroscopic analysis showed that the 4-M KOH extracted hemicellulosic fraction contained an unusual β-(1,4)-linked linear xyloglucan. Enzyme hydrolysis and analysis of the resulting fragments by matrix-assisted laser desorption ionization-time of flight-mass spectrometry (MALDI-TOF-MS) showed that this linear polymer contained partially sulfated Glc₃Xyl₂ or Glc₄Xyl₂ as oligomeric building subunits.     

Heterogeneous oligonucleotide-hybridization assay based on hot electron-induced electrochemiluminescence of a rhodamine label at oxide-coated aluminum and silicon electrodes

This paper describes a heterogeneous oligonucleotide-hybridization assay based on hot electron-induced electrochemiluminescence (HECL) of a rhodamine label. Thin oxide-film coated aluminum and silicon electrodes were modified with an aminosilane layer and derivatized with short, 15-mer oligonucleotides via diisothiocyanate coupling. Target oligonucleotides were conjugated with tetramethylrhodamine (TAMRA) dye at their amino modified 5′ end and hybridization was detected using HECL of TAMRA. Preliminary results indicate sensitivity down to picomolar level and low nonspecific adsorption. The sensitivity was better on oxide-coated silicon compared to oxide-coated aluminum electrodes and two-base pair mismatched hybrids were successfully discriminated. The experimental results presented here might be useful for the design of disposable electrochemiluminescent DNA biosensors.     

Polysaccharides from Sesamum indicum meal: Isolation and structural features

Defatted Sesamum indicum seed cake was extracted, following two separate sequences, and the effects of extraction medium on yield and composition of the extracts were compared. Polysaccharides extracted sequentially with dilute acid and alkali represented 250 mg/g of defatted meal. The isolated polymers contained arabinan, rhamnogalacturonan I (RG I) and arabinogalactan proteins. Polysaccharides extracted during chlorite treatment and with dilute alkali had a higher proportion of rhamnose, suggesting a more branched variety of polymer. Three extracts, which were further characterized by size exclusion chromatography, gave two overlapping peaks. Structural characterisation of hemicellulosic polysaccharides, isolated with KOH, using specific enzyme hydrolysis, ion exchange chromatography (HPAEC) and matrix assisted laser desorption ionisation-time-of-flight (MALDI-TOF) mass spectroscopy, showed that sesame meal xyloglucan (XG) contained XXXG, XXFG and XXLG, and XLLG (named according to Fry et al., 1993) as the major building sub-units in the ratio of 1:0.9:0.3. Hydrolysis with endo-β-(1 → 4)-d-xylanase and analysis of the xylan derived oligosaccharides showed the presence of monomeric xylose (40%), xylobiose (46%) and acidic xylan oligosaccharides containing 4-O-methyl-d-glucuronic acid residues (14%).     

FEA evaluation of material stiffness changes for a polymer assisted 3D polycaprolactone/β-tricalcium phosphate scaffold in a mandibular defect reconstruction model

In bone regenerative engineering, the biomechanical performance of the scaffold at the bone-tissue interface is a key consideration. The evaluation of this parameter is a crucial step in designing, optimizing and manufacturing of bone substitute materials for clinical application, but is as yet comparatively unexplored. To this end, we utilized a novel polymer-assisted method to fabricate a three-dimensional (3D) Polycaprolactone/β-Tricalcium phosphate scaffold. The compressive modulus was measured and the data used to inform finite element analysis. The scaffolds achieved a maximum compressive moduli of 151 MPa, close to that of cortical bone. Further computational simulations were performed to determine the stresses and local scaffold adaptation profile, using data from computer tomography scans of the mandible. Local stresses were simulated based on the density changes in new bone forming in the scaffold at different stages of healing. The stress distribution in the mandible, scaffold center and scaffold interface were explored for a static load of 200 N, which corresponds to the load of adult mastication near the incisors. The analysis revealed that the maximum cross-sectional stress at the scaffold center and at the scaffold interface was 2.7 and 4.12 MPa respectively. The majority of the stress was localized in the bone of the mandible, with the scaffold bearing minimal loading at the start, but more over time as infiltration of more new bone progressed.     

Engineered Human Induced Pluripotent Cells Enable Genetic Code Expansion in Brain Organoids

Human induced pluripotent stem cell (hiPSC) technology has revolutionized studies on human biology. A wide range of cell types and tissue models can be derived from hiPSCs to study complex human diseases. Here, we use PiggyBac-mediated transgenesis to engineer hiPSCs with an expanded genetic code. We demonstrate that genomic integration of expression cassettes for a pyrrolysyl-tRNA synthetase (PylRS), pyrrolysyl-tRNA (PylT) and the target protein of interest enables site-specific incorporation of a non-canonical amino acid (ncAA) in response to an amber stop codon. Neural stem cells, neurons and brain organoids derived from the engineered hiPSCs continue to express the amber suppression machinery and produce ncAA-bearing reporter. The incorporated ncAA can serve as a minimal bioorthogonal handle for further modifications by labeling with fluorescent dyes. Site-directed ncAA mutagenesis will open a wide range of applications to probe and manipulate proteins in brain organoids and other hiPSC-derived cell types and complex tissue models.     

Characterization of in vivo wear debris from ceramic-ceramic total hip arthroplasties

In contrast to the much-studied mechanism of aseptic loosening of the metal-polyethylene joint couple, the mechanism responsible for failure of ceramic-ceramic (CC) total hip arthroplasties (THAs) has not been evaluated. The aim of this study was to conduct a systematic characterization of the in vivo wear debris from 15 cases of CC THAs revised for aseptic loosening. Two methods were used to evaluate the wear debris; a semiquantitative histological analysis of H&E-stained periprosthetic pseudomembranes; and an evaluation of isolated debris particles using SEM, energy-dispersive X-ray analysis, and image analysis. The three main types of particulate debris identified were titanium alloy (TiAlV) and alumina ceramic (Al2O3) of prosthetic origin, and zirconium dioxide (ZrO2) from the contrast agent used in the cement for prosthetic fixation. Alumina debris was present in the smallest proportion (12%) and was consistent with the low wear rate of the CC joint couple. Zirconium dioxide debris was present in the greatest proportion (76%) and was an unexpected finding. The ZrO2 debris represented microstructural grains of the original ZrO2 particles added as contrast agent to the cement. The presence of a histiocytic foreign body reaction to ZrO2 debris on histologic sections leads us to believe that these particles play an important role in aseptic loosening of the CC THAs evaluated in this study.