Use of inverse gas chromatography to quantify interactions in amine cured epoxy resins

Flory–Huggins interaction parameters, λ, were determined for a series of probes in an amine cured epoxy resin matrix (433–493 K) and its precursors (324–363 K) by inverse gas chromatography (IGC). Hildebrand–Scatchard theory was combined with Flory–Huggins theory in order to estimate infinte dilution solubility parameters (δ₂) for the matrix and its precursors at 298 K. It was shown that the value of the solubility parameter for the cured resin matrix lies between those of its precursors. Compared to the majority of published work, an unusual aspect of this application of IGC is that solubility parameters have been determined when the stationery phases are (i) small molecules and (ii) a highly crosslinked polymer. Moreover, all possible attempts have been made to ensure equilibrium conditions between probe and stationary phase, and compensation for asymmetry of peak profile has been applied in determining δ₂. The solubility parameters estimated by IGC are in good agreement with those calculated by other methods.     

Methane/natural gas storage and delivered capacity for activated carbons in dry and wet conditions

Methane/natural gas storage and delivered capacity for three different activated carbons in dry and wet conditions were measured. In all tests the temperature of the bed was maintained constant at 277.15 K and pressure was increased up to 10 MPa. Natural gas storage capacity was less than methane storage capacity in dry conditions for all the three activated carbons tested, while the gas delivery was almost the same. One of activated carbon tested (NC120) showed the possibility of hydrate forming for pressures higher than 4 MPa but the amount of gas stored still was less than the amount stored in dry conditions over the whole range of pressure. The analysis of the gas delivered at each pressure steps shows that considerable amount of heavy components do not come out from the bed even at very low pressures in both dry and wet condition tests. Repeatability of the sorption/desorption processes - vital for possible commercial/industrial use - has been examined over various cycles.     

One-radius triplets

The one-radius triplet is an optical system that consists of three lenses. Either the radii of curvature of the lenses have the same absolute value or one radius of curvature has an infinitely large value. The advantage of such optical systems is that their production cost is less than that of systems with ordinary triplets. Here a theory of one-radius triplets is described and tables of parameters for their modification are provided. Residual aberrations are given for several selected triplets. One-radius triplets are suitable for use in laser technology and metrology.     

Graphene substrates promote adherence of human osteoblasts and mesenchymal stromal cells

The biocompatibility of large single layer graphene produced by chemical vapour deposition was investigated using human osteoblasts and mesenchymal stromal cells. The study was focused on cellular adhesion, morphology and the ability to proliferate on graphene substrates. It was found that both of the cell types which were tested adhered and proliferated better when cultured on graphene films than on a SiO₂ substrate.     

Carnosinemia. First French case

Serum high density lipoprotein (HDL) cholesterol, total serum cholesterol and triglycerides were determined in twenty men before, immediately after, and 1, 2 and 4 days after a 70 km cross-country ski race. HDL cholesterol increased by 12% of the pre-race level immediately after the race, rose further to 17% above the initial level on the following day, and was still elevated 4 days after the race. LDL + VLDL cholesterol, however, showed a tendency to decrease immediately after the race and was reduced by 17% and 11% of the pre-race level on the following 2 days. Triglycerides were reduced by 30% of the initial level immediately after the race, were still low on the following day, but were restored to normal 2 days after the race. It is concluded that a single exposure to prolonged heavy exercise induces changes in the HDL metabolism, showing that the physical exercise per se plays an important role for the increased HDL level seen in well-trained athletes.     

Synthesis,characterization, and study of thermal properties of methyl-substituted arylene sulfone ether polyimides,polyamides, and poly(amide–imides)

A number of methyl-substituted bis[(phenyleneoxy) sulfone] dianilines were synthesized and reacted with pyromellitic dianhydride (PMDA), benzophenone tetracarboxylic acid dianhydride (BTDA), terephthaloyl chloride (TPC), isophthaloyl chloride (IPC), and trimellitic anhydride acid chloride (TMAC) to prepare a series of polyimides, polyamides, and poly(amide–imides), respectively. Low temperature solution and interfacial polymerization techniques were utilized to prepare the above polymers. Most of the polymers prepared formed tough, transparent flexible films. The prepared polymers were characterized by solution viscosity, thermal gravimetric analysis (dynamic and isothermal), and differential scanning calorimetry. The effect of the number and the ring substitution of methyl groups on polymer properties is discussed.     

Ordinary Gasoline Emissions Induce a Toxic Response in Bronchial Cells Grown at Air-Liquid Interface

Gasoline engine emissions have been classified as possibly carcinogenic to humans and represent a significant health risk. In this study, we used MucilAir™, a three-dimensional (3D) model of the human airway, and BEAS-2B, cells originating from the human bronchial epithelium, grown at the air-liquid interface to assess the toxicity of ordinary gasoline exhaust produced by a direct injection spark ignition engine. The transepithelial electrical resistance (TEER), production of mucin, and lactate dehydrogenase (LDH) and adenylate kinase (AK) activities were analyzed after one day and five days of exposure. The induction of double-stranded DNA breaks was measured by the detection of histone H2AX phosphorylation. Next-generation sequencing was used to analyze the modulation of expression of the relevant 370 genes. The exposure to gasoline emissions affected the integrity, as well as LDH and AK leakage in the 3D model, particularly after longer exposure periods. Mucin production was mostly decreased with the exception of longer BEAS-2B treatment, for which a significant increase was detected. DNA damage was detected after five days of exposure in the 3D model, but not in BEAS-2B cells. The expression of CYP1A1 and GSTA3 was modulated in MucilAir™ tissues after 5 days of treatment. In BEAS-2B cells, the expression of 39 mRNAs was affected after short exposure, most of them were upregulated. The five days of exposure modulated the expression of 11 genes in this cell line. In conclusion, the ordinary gasoline emissions induced a toxic response in MucilAir™. In BEAS-2B cells, the biological response was less pronounced, mostly limited to gene expression changes.