Maskless Preparation of Spatially-Resolved Plasmonic Nanoparticles on Polydimethylsiloxane via In Situ Fluoride-Assisted Synthesis

Here, a fluoride-assisted route for the controlled in-situ synthesis of metal nanoparticles (NPs) (i.e., AgNPs, AuNPs) on polydimethylsiloxane (PDMS) is reported. The size and coverage of the NPs on the PDMS surface are modulated with time and over space during the synthetic process, leveraging the improved yield (10×) and faster kinetics (100×) of NP formation in the presence of F⁻ ions, compared to fluoride-free approaches. This enables the maskless preparation of both linear and step gradients and patterns of NPs in 1D and 2D on the PDMS surface. As an application in flexible plasmonics/photonics, continuous and step-wise spatial modulations of the plasmonic features of PDMS slabs with 1D and 2D AgNP gradients on the surface are demonstrated. An excellent spatially resolved tuning of key optical parameters, namely, optical density from zero to 5 and extinction ratio up to 100 dB, is achieved with AgNP gradients prepared in AgF solution for 12 minutes; the performance are comparable to those of commercial dielectric/interference filters. When used as a rejection filter in optical fluorescence microscopy, the AgNP-PDMS slabs are able to reject the excitation laser at 405 nm and retain the green fluorescence of microbeads (100 µm) used as test cases.     

Constant stretching rate experiments on low density polyethylene

A simple apparatus for elongational test of molten polymers is presented. Its realiability is demonstrated by means of stress growth in constant stretching rate experiments and relaxation test on a low density polyethylene sample.     

What do we learn from binding features? Evidence for multilevel feature integration.

Four experiments were conducted to investigate the relationship between the binding of visual features (as measured by their aftereffects on subsequent binding) and the learning of feature-conjunction probabilities. Both binding and learning effects were obtained, but they did not interact. Interestingly, (shape-color) binding effects disappeared with increasing practice, presumably because of the fact that only 1 of the features involved was relevant to the task. However, this instability was only observed for arbitrary, not highly overlearned combinations of simple geometric features and not for real objects (colored pictures of a banana and strawberry), where binding effects were strong and resistant to practice. These findings suggest that learning has no direct impact on the strength or resistance of bindings or on speed with which features are bound; however, learning does affect the amount of attention particular feature dimensions attract, which again can influence which features are considered in binding. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Identifying a putative common binding site shared by substance P receptor and an anti-substance P monoclonal antibody

Substance P G-protein coupled receptor and the antigen recognitionsite of a monoclonal antibody raised against substance P sharea stretch of five contiguous identical amino acids. This observationprompted us to build an atomic model of both the receptor andthe antibody and to analyse their common features. In particular,we report here that a pocket of similar size and compositionis present in both proteins, strongly suggesting a similarityin the mode of binding of both macromolecules to substance P.From the analysis of our models, the available data on the modeof binding of the antibody to substance P and recent data onsubstance P receptor mutants, we concluded that the pocket isvery likely to be involved in binding of the C-terminal 'messagesequence' of the tachykinin. This allowed us to suggest specificsite-directed mutants of the receptor which should shed somelight on the mechanism of peptide recognition by G-protein coupledreceptors.     

Film Blowing of Biodegradable Polymer Nanocomposites for Agricultural Applications

Films for agricultural applications, such as greenhouses films or mulching films are generally made of polyolefins such as linear low-density polyethylene (LLDPE) or low-density polyethylene. However, the use of biodegradable and/or compostable polymers is increasing, which enjoy the additional advantage that they can be left on the site since a fine life would be gradually assimilated to the underlying soil. Nevertheless, biodegradable polymeric films often do not have suitable mechanical performances. In this work, biodegradable polymer-based nanocomposite films are prepared by film blowing and compared with traditional LLDPE based nanocomposites. In particular, a biodegradable polymer blend and two different inorganic nanofillers (an organo-modified clay and a calcium carbonate with a hydrophobic coating) are used for the preparation of the nanocomposites. A detailed investigation of obtained materials is performed through rheological, mechanical, and optical characterizations. Adding nanofillers led to an increase of rigidity and tear strength of blown films without negatively affecting their ductility.     

Design of Lu2O3-reinforced Cf/SiC-ZrB2-ZrC ultra-high temperature ceramic matrix composites: Wetting and interfacial reactivity by ZrSi2 based alloys

The wettability and infiltration of molten ZrSi₂ and ZrSi₂-Lu₂O₃ alloys into C_f/SiC and B₄C-infiltrated C_f/SiC composites were investigated to understand the interfacial interactions that occur during the development of C_f/SiC-ZrC and C_f/SiC-ZrB₂-ZrC-Lu₂O₃ materials. A significant evaporation of Si from the liquid affected the wetting behaviour of the alloy when tested in a vacuum at 1670 °C. The better wetting and spreading of the alloy over the surface was observed for the composites with lower overall porosity (12 %). On the other hand, the formation of an outer dense layer, followed up by the uniform infiltrated region up to ～ 1 mm was observed for the C_f/SiC with higher porosity (21 %). The infiltrated alloy reacted with SiC matrix to form ZrC or with B₄C-infiltrated SiC matrix to form ZrB₂-ZrC-SiC. The Lu₂O₃ particles were not wetted by the melt, and were pushed away of the reaction zone by the solidification front.     

A comparison between wet and cryogenic drilling of CFRP/Ti stacks

This paper compares conventional and cryogenic cooling in the deep hole drilling of carbon fiber reinforced polymer (CFRP)/Ti stacks. Various parameters are taken into account to find if the use of cryogenic coolant is justified by the improvement of the final results. Both the thrust and the torque were acquired continuously during the machining operations and compared both in average and distribution. The use of a cryogenic coolant brings a reduction in thrust force and torque without any sensible drawback. Overall the results prove that cryogenic drilling is a suitable technology for CFRP/Ti stack drill.     

Comparison between TRH-stimulated TSH and basal TSH measurement by a commercial immunoradiometric assay in the management of thyroid disease

In order to assess the current diagnostic role of the TRH test following the introduction of more sensitive "second generation" TSH assays, we studied a series of 259 outpatients, 237 women and 22 men, mean age 44.7 years (range 12-82), 91 of whom (35%) with untreated simple goiter, 133 (51%) with simple nodular goiter on steady state I-thyroxine treatment, 18 (7%) with overt or subclinical hyperthyroidism and 17 (7%) with overt or subclinical hypothyroidism, compared to a control group of 26 euthyroid healthy subjects. Serum TSH was measured by a commercial immunoradiometric assay (clinical sensitivity 0.1 microU/ml). TSH response to TRH was evaluated 30 minutes after giving 200 micrograms TRH i.v. bolus, the results being analyzed both as absolute increase (delta-TSH=stimulated TSH minus basal TSH) and as relative increase (R-TSH stimulated TSH/basal TSH). Using cut-off values of 0.3-3.2 microU/ml, basal TSH measurement was able to detect hypothyroidism (specificity = 100%) and to exclude hyperthyroidism (sensivity = 96.9%), but failed to accurately prove hyperthyroidism (specificity = 93.4%) and, above all, to exclude hypothyroidism (sensitivity = 35.3%) in our ambulatory patients. The delta-TSH values showed a basal TSH dependent linear increase (r = + 0.87, p < 0.001) both including only patients (n = 139) with basal TSH level in the euthyroidism range and including all patients (n = 223) having TSH responsive to TRH. All the patients with detectable basal TSH level displayed detectable TSH response to TRH, as did 19 (= 23.5%) of 81 patients with undetectable (< 0.1 microU/ml) basal value. In particular: a) for subnormal but detectable basal TSH ranging between 0.1 and 0.2 microU/ml, TSH was always hyporesponsive (delta-TSH < or = 2.5 microU/ml), while between 0.2 and 0.3 microU/ml TSH was hyporesponsive in 72.2% and normoresponsive (delta-TSH > 2.5 and < or = 11.9 microU/ml) in the remaining 27.8%; b) for basal TSH values within the normal range (0.3-3.2 microU/ml). TSH was hyporesponsive in 13.7%, normoresponsive in 74.8% and hyperresponsive in 11.5%; c) for high basal TSH values TSH was always hyperresponsive. The analysis of R TSH showed relatively constant values in the range of euthyroidism and hypothyroidism (m +/- SD: 7.4 +/- 2.3 and 7.7 +/- 3.1, respectively), and a marked differentiation of hyperthyroid patients whose R-TSH values were significantly lower (4.2 +/- 3.4) but had a wide individual variability. Linear regression analysis of basal or stimulated TSH and circulating thyroid hormones showed a close negative relationship, being highly significant between delta-TSH and T4 (r = 0.57, p < 0.001) and delta-TSH and FT4 (r = 0.46, p < 0.001). In conclusion, after the introduction of current second generation TSH immunoradiometric assay, the diagnostic role of the TRH test is greatly limited but not to be excluded: it can provide additional information to that obtained with simple basal TSH measurement in the diagnosis of subclinical hypothyroidism and in the precise evaluation of the degree of TSH suppression in patients with a subnormal basal TSH, either for endogenous thyrotoxicosis or I.-thyroxine treatment.     

A theoretical analysis of the influence of fixational instability on the development of thalamocortical connectivity

Under natural viewing conditions, the physiological instability of visual fixation keeps the projection of the stimulus on the retina in constant motion. After eye opening, chronic exposure to a constantly moving retinal image might influence the experience-dependent refinement of cell response characteristics. The results of previous modeling studies have suggested a contribution of fixational instability to the Hebbian maturation of the receptive fields of V1 simple cells (Rucci, Edelman, & Wray, 2000; Rucci & Casile, 2004). This letter examines the origins of such a contribution. Using quasilinear models of lateral geniculate nucleus units and V1 simple cells, we derive analytical expressions for the second-order statistics of thalamocortical activity before and after eye opening. We show that in the presence of natural stimulation, fixational instability introduces a spatially uncorrelated signal in the retinal input, which strongly influences the structure of correlated activity in the model. This input signal produces a regime of thalamocortical activity similar to that present before eye opening and compatible with the Hebbian maturation of cortical receptive fields.     

Geometry and Stacking Sequence Effect on Composite Spinnaker Pole's Stiffness: Experimental and Numerical Analysis

Composite materials are widely employed in sailing sports, a possible application is for the mast pole or other sail poles. In the paper the attention is focused on the spinnaker poles mechanical performances; in particular the focus is on axial and ring compressive properties of three different carbon fibre/epoxy resin spinnaker poles, to investigate both the diameter and stacking sequence effect on the mechanical performance of the structure. Starting from the stacking sequence used in the production of a particular spinnaker pole, the effect of a lamina at 0° in the middle of wall thickness is investigated with the purpose to obtain a more stiff structure. Moreover to test the proposed stacking sequence on different size products, a prototype with lower diameter is realized. To properly evaluate axial and ring stiffness, axial compression test and ring stiffness one are performed. Then a numerical model is developed to support the design of the finished product: A simple and versatile numerical analysis (FEA with software ANSYS), by simulating ring stiffness and pull-direction compression tests, is carried out in elastic regime. Such model should be suitable for designing and/or verifying the mechanical performance of pole structures, even though differing from those above described, for materials, geometry and stacking sequence.