Cooling of cylindrical vertical tanks submitted to natural internal convection

A numerical and an experimental analysis of velocity and temperature fields inside a storage tank submitted to natural convection is presented. The analysis was performed in two stages. In the first stage, the temperature profile along the vertical axis of the storage tank was obtained experimentally and numerically, for cooling time ranging from 45 to 60 h. The numerical analysis was carried out using a transient bi-dimensional model in cylindrical co-ordinates. In the second stage, after the numerical code validation, 40 cases of cooling with four aspect ratios, five insulation thicknesses, and two different volumes were simulated. In all simulations, thermal losses for the environment in all tank walls (side, top and bottom) were considered. Two correlations for the Nusselt number, encompassing all the forty cases, were obtained with these results.     

High-resolution HLA-DRB typing using denaturing gradient gel electrophoresis and direct sequencing

Skeletal development of transgenic mice with a type II collagen mutation was analyzed and compared with wild-type littermates. The single base substitution in Col2a1 resulted in a glycine to serine mutation within the helical domain and corresponded to one previously identified in a patient with the lethal human chondrodysplasia, hypochondrogenesis (Horton et al. [1992] Proc. Natl. Acad. Sci. U.S.A. 89:4583-4587). Skeletal staining of embryos from 14.5 through 18.5 days of gestation demonstrated a dwarf phenotype in the transgenic embryos, most notably short limb bones and vertebral column that was first detected at 15.5 days post-coitus. In addition to the reduced length, the extent of ossification was less in the transgenic mice. The architecture of the long bone growth plate was abnormal in the transgenic tissue, in particular there was no discernible proliferative zone. There were few stacks of characteristically flattened cells and the overall length of the growth plate in the mutant embryos was reduced. At the ultrastructural level, there were fewer collagen fibrils present in the transgenic mouse cartilage compared to that of wild-type littermates. Ultrastructural localization of collagen types II, IX and XI revealed a similar pattern between the transgenic and wild-type pups, suggesting that the collagen fibrils present in the matrix of littermates with both phenotypes had a similar composition. Skeletal analysis and cartilage histochemistry indicated that effect of the type II collagen mutation was to reduce the density of the collagen fibrils within the cartilage matrix which was associated with delayed bone formation and resulted in a short-limbed phenotype.     

Hydroprocessing peculiarities of Fischer–Tropsch syncrude

When catalysts developed for crude oil hydroprocessing are used for syncrude, there are syncrude-specific peculiarities to consider. These relate to differences in the nature and abundance of heteroatoms, olefins, metal species, waxes and aqueous products. Some important aspects are (a) heat release during naphtha and distillate hydroprocessing is very high, but wax hydrocracking is almost isothermal; (b) syncrude is sulphur-free and the use of sulphided base-metal hydroprocessing catalysts require the addition of sulphur-containing compounds to the syncrude; (c) oxygenates strongly adsorb on some catalytic surfaces to affect catalytic behaviour; (d) carbonyl–carboxylic acid interconversion and water produced by hydrodeoxygenation (HDO) may result in catalyst degradation by acid and hydrothermal attack; (e) carboxylic acids in syncrude result in equipment corrosion and catalyst leaching; (f) metal carboxylates are the main metal-containing species in syncrude and are not removed by hydrodemetallation (HDM) catalysis, but by thermal decomposition.     

Possible effects of site isolation in antimony oxide-modified vanadia/titania catalysts for selective oxidation of o-xylene

Titania-supported vanadia catalysts were modified by addition of antimony oxide for application in o-xylene selective oxidation to phthalic anhydride. It was shown that active and selective catalysts can be prepared by ball-milling mixtures of powders of TiO₂, V₂O₅and Sb₂O₃followed by calcination. X-ray photoelectron spectroscopy proves the formation of highly dispersed overlayers of vanadium oxide and antimony oxide, in which V⁵⁺is partially reduced to lower oxidation states and Sb³⁺is partially oxidized to Sb⁵⁺. Antimony oxide segregated into the outermost surface layers. It is therefore inferred that the presence of the antimony oxide modifier spatially separates V–O species and leads to site isolation which may be responsible for the positive effect of the modifier for the catalyst's selectivity.     

Application execution path analysis for the automatic parallelisation of binary codes in the Intel x86 platform

Traditionally, computer programs have been developed using the sequential programming paradigm. With the advent of parallel computing systems, such as multicore processors and distributed environments, the sequential paradigm became a barrier to the utilisation of the available resources, since the program is restricted to a single processing unit. To address this issue, we propose a transparent automatic parallelisation tool with a binary rewriter. The steps of our approach are: the disassembly of the Intel x86 application, its transformation into an intermediary language; the analysis of this intermediary representation to obtain the flow and dependency graphs; the partitioning of the application into parallel units, using the obtained graphs; and, finally, the reassembly of the application back into the original Intel x86 architecture. By transforming the compiled application software, we aim at obtaining a program which can better explore the parallel resources, with no extra effort required from users or developers.     

From big smartphone data to worldwide research: The Mobile Data Challenge

This paper presents an overview of the Mobile Data Challenge (MDC), a large-scale research initiative aimed at generating innovations around smartphone-based research, as well as community-based evaluation of mobile data analysis methodologies. First, we review the Lausanne Data Collection Campaign (LDCC), an initiative to collect unique longitudinal smartphone dataset for the MDC. Then, we introduce the Open and Dedicated Tracks of the MDC, describe the specific datasets used in each of them, discuss the key design and implementation aspects introduced in order to generate privacy-preserving and scientifically relevant mobile data resources for wider use by the research community, and summarize the main research trends found among the 100+ challenge submissions. We finalize by discussing the main lessons learned from the participation of several hundred researchers worldwide in the MDC Tracks.     

Processing and interactive editing of huge point clouds from 3D scanners

This paper describes a new out-of-core multi-resolution data structure for real-time visualization, interactive editing and externally efficient processing of large point clouds. We describe an editing system that makes use of the novel data structure to provide interactive editing and preprocessing tools for large scanner data sets. Using the new data structure, we provide a complete tool chain for 3D scanner data processing, from data preprocessing and filtering to manual touch-up and real-time visualization. In particular, we describe an out-of-core outlier removal and bilateral geometry filtering algorithm, a toolset for interactive selection, painting, transformation, and filtering of huge out-of-core point-cloud data sets and a real-time rendering algorithm, which all use the same data structure as storage backend. The interactive tools work in real-time for small model modifications. For large scale editing operations, we employ a two-resolution approach where editing is planned in real-time and executed in an externally efficient offline computation afterwards. We evaluate our implementation on example data sets of sizes up to 63 GB, demonstrating that the proposed technique can be used effectively in real-world applications.