Deduction of a facile method to construct Antheraea mylitta silk fibroin/gelatin blend films for prospective biomedical applications

Blend films of two types (I and II) were prepared by mixing Antheraea mylitta silk fibroin (AMF) and gelatin solution in various blend ratios via the solution casting method. Two different crosslinkers, namely glutaraldehyde and genipin, were used during blend preparation. The structural characteristics and thermal properties of the blend films were examined by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), Thermogravimetric analysis (TGA) and Diffrential scanning calorimetery (DSC). The FTIR spectra showed conformational alterations in type I blend films while type II films attained high β‐sheet crystallinity. The XRD diffractograms presented a high degree of crystallinity in type II blend films compared to type I, which showed an almost amorphous structure. Further, thermal and biological studies were conducted on type II films. According to the TGA thermograms, the degradation temperature of the crosslinked blend films shifted compared to pure gelatin and pure AMF films. Partial miscibility of the two components was indicated by DSC thermograms of the blends. The high water uptake capacity of type II blend films was found to imitate hydrogel behaviour. The blend films did not show any toxicity in 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide (MTT) assay and supported L929 fibroblast cell spreading and proliferation. The biodegradation of the blend films was significantly faster than the pure silk film. © 2020 Society of Industrial Chemistry     

Situating natural language understanding within experience-based design

Building useful systems with an ability to understand "real" natural language input has long been an elusive goal for Artificial Intelligence. Well-known problems such as ambiguity, indirectness, and incompleteness of natural language inputs have thwarted efforts to build natural language interfaces to intelligent systems. In this article, we report on our work on a model of understanding natural language design specifications of physical devices such as simple electrical circuits. Our system, called KA, solves the classical problems of ambiguity, incompleteness and indirectness by exploiting the knowledge and problem-solving processes in the situation of designing simple physical devices. In addition, KA acquires its knowledge structures (apart from a basic ontology of devices) from the results of its problem-solving processes. Thus, KA can be bootstrapped to understand design specifications and user feedback about new devices using the knowledge structures it acquired from similar devices designed previously.In this paper, we report on three investigations in the KA project. Our first investigation demonstrates that KA can resolve ambiguities in design specifications as well as infer unarticulated requirements using the ontology, the knowledge structures, and the problem-solving processes provided by its design situation. The second investigation shows that KA's problem-solving capabilities help ascertain the relevance of indirect design specifications, and identify unspecified relations between detailed requirements. The third investigation demonstrates the extensibility of KA's theory of natural language understanding by showing that KA can interpret user feedback as well as design requirements. Our results demonstrate that situating language understanding in problem solving, such as device design in KA, provides effective solutions to unresolved problems in natural language processing.     

Interface cracking between functionally graded coatings and a substrate under antiplane shear

Coating technology plays a significant role in a number of applications such as high temperatures, corrosion, oxidation, wear, and interface. In this paper, we investigate the interface cracking between ceramic and/or functionally graded coatings (FGM coatings) and a substrate under antiplane shear. Four coating models are considered, namely single layered homogeneous coating, double layered piece-wise homogeneous coating, single layered FGM coating and double layered coating with an FGM bottom coat. Mode III stress intensity factors (SIFs) are calculated for the different coating models. In the case of μ_L > μ₀ where μ₀ is the shear modulus of the substrate and μ_L the shear modulus of the material at the surface of the coating, it is found that the single layered FGM coating reduces SIF slightly, whereas the coating system with a top homogeneous layer and a thin FGM bottom layer reduces SIF significantly. In the case of μ_L < μ₀ the SIF is found to be larger for the FGM coatings than for the homogeneous coatings. The FGM coating, however, may still be superior to homogeneous coatings in this case as FGM coatings usually provide better bonding strength between the coating and substrate. Finally, the applicability of the SIF concept in the fracture of FGM coatings is discussed. Large modulus gradients in thin coatings may seriously restrict the application of SIFs as the SIF-dominant zone may fall into the crack tip nonlinear deformation and damage zone. The same argument exists for some interphase models in interface crack solutions.     

Imperfections and impurity phases in flux grown RCrO3 (R = La,Yb) single crystals

Results of scanning electron microscopy (SEM) and energy dispersive X-ray analytical (EDAX) investigations, conducted on some elevated structures displayed by flux grown rare earth orthochromite, RCrO₃ (R = La, Yb) crystals, are presented. The peculiar structures exhibited by crystal surfaces indicate imperfections and impurity phases. EDAX of elevated structures reveals the various phases to be composed of lead associated materials which may probably be either Pb₂CrO₅ or Pb₂OF₂ (flux). Other secondary crystallization of impurity phases, ROF (R = La, Yb) is illustrated in the case of RCrO₃ (R = La, Yb) crystals. The elevated structures illustrate their non-stoichiometric behaviour. Precipitation of impurity phases and formation of imperfections during the growth of RCrO₃ (R = La, Yb) crystals and their effect on the crystalline quality is discussed.     

Electrochemical Aspects of Electroosmotic Dewatering of Clay Suspensions

An attempt is made to elucidate the electrochemical aspects of the electroosmotic dewatering (EOD) of clays as reported in some recent work, especially that on interrupted DC power electroosmotic dewatering published by Rabie, Mujumdar and Weber (2). These authors showed that the dewatering by EOD stops after the DC power has been on for several minutes or hours; on interruption of their power and on short-circuiting of the electrodes, conditions can be created again for some further dewatering by DC power EOD. This discovery, of Rabie et al. is interpreted as a fuel cell effect and it is shown that it affords clues to several other electrochemical strategies for the possible enhancement of the efficiency of the EOD by DC power.

Further, the open circuit potentials observed by Rabie et al. (2) on the interruption of DC power are given an electrochemical interpretation which leads to quantitative estimates in agreement with the experimental values.     

Haemangiopericytoma of the nasal cavity

Haemangiopericytoma of nose and paranasal sinuses is relatively uncommon tumour. It occurs in adults in sixth and seventh decades of life. In view of paucity of intranasal haemangiopericytoma old in Indian literature and young age of patient, we are reporting one case in 28-year-old female who presented with recurrent, profuse epistaxis.     

Termination of pregnancy at 9-13 weeks' amenorrhoea with mifepristone and misoprostol

The effectiveness of a combined regimen of mifepristone and vaginal misoprostol for termination of pregnancies of 9-13 weeks of gestation was investigated in 120 UK abortion patients (median age, 22.1 years; median duration of amenorrhea, 10.3 weeks). Each woman received a single oral dose of 200 mg of mifepristone 36-48 hours before admission, at which time 800 mcg of misoprostol was administered vaginally. Where indicated, a further two doses of 400 mcg of misoprostol (vaginal or oral) were provided every 3 hours. All 120 women aborted on the day of prostaglandin administration; however, 6 women (5%) required exploratory curettage after the procedure for retained placenta. The median prostaglandin dose was 1200 mcg (range, 800-1600 mcg). The median time from misoprostol administration to abortion was 4.33 hours (range, 1.3-16.0 hours). 60 women (50%) required oral analgesics and 26 (22%) received parenteral analgesia. Diarrhea occurred in 38 women (32%). The median duration of bleeding after abortion was 12.5 days (range, 3-43 days). In questionnaires administered to 73 women, only 3 (4%) expressed dissatisfaction with medical abortion, because of pain or prolonged bleeding. The relatively high dose of misoprostol used in this study and the vaginal route of administration are presumed to account for the 95% success rate. Extension of medical abortion to later gestation times would decrease the need for surgery and expand women's choice of methods of pregnancy termination.     

Properties and Performance of Cation-Doped Ceria Electrolyte Materials in Solid Oxide Fuel Cell Applications

Cation-doped CeO₂ electrolyte has been evaluated in single-cell and short-stack tests in solid oxide fuel cell environments and applications. These results, along with conductivity measurements, indicate that an ionic transference number of ∼0.75 can be expected at 800°C. Single cells have shown a power density >350 mW/cm². Multicell stacks have demonstrated a peak performance of >100 mW/cm² at 700°C using metallic separators.     

Effect of epitaxial realignment on the leakage behavior of arsenic-implanted,as-deposited polycrystalline Si-on-single crystal Si diodes

When dopants are indiffused from a heavily implanted polycrystalline silicon film deposited on a silicon substrate, high thermal budget annealing can cause the interfacial “native” oxide at the polycrystalline silicon-single crystal silicon interface to break up into oxide clusters, causing epitaxial realignment of the polycrystalline silicon layer with respect to the silicon substrate. Anomalous transient enhanced diffusion occurs during epitaxial realignment and this has adverse effects on the leakage characteristics of the shallow junctions formed in the silicon substrate using this technique. The degradation in the leakage current is mainly due to increased generation-recombination in the depletion region because of defect injection from the interface.