Decrease in alkaline triglyceride lipase in primary cultured hepatocytes from mice with sarcoma 180

Primary cultured hepatocytes from normal mice and mice with Sarcoma 180 were characterized. The viability of freshly isolated heptocytes from both sources was over 90% and the cells had a relatively stable population of DNA for a minimum of three days. After incubation with (³H)leucine, the syntheses and secretions of (³H)labeled trichloracetic acid-insoluble materials by hepatocytes from both normal and tumor-bearing mice increased similarly. However, the alkaline triglyceride lipase activity of a homogenate of freshly isolated hepatocytes from tumor-bearing mice was one-third that of cells from normal mice. the activity of hepatocytes from tumor-bearing mice inceeased less during culture than did the activity of cells isolated from normal mice.     

Optimal synthesis of process systems Necessary condition for optimal system and its use in synthesis of systems

The necessary condition for the optimal process system structure which includes both the optimal interconnection and optimal design of processing units is derived in terms of the structural parameters. The structural parameters are essentially splitting factors of process streams connecting processing units. The necessary condition requires the structural parameters and the design vectors to satisfy the weak maximum condition of the Hamiltonian type scalar functions. On the basis of the condition, a search method, evolutionary search for optimal structure (ESOS), for attaining the optimal structure starting from a simple structure is developed and its convergence is proved. An example of synthesizing a reactor-separator system illustrates its use.     

Interactions between nano-spacing flying head sliders and ultra-thin liquid lubricant films with non-uniform distribution in hard disk drives

This paper describes the effect of ultra-thin liquid lubricant films on air bearing dynamics and flyability of less than 10 nm spacing flying head sliders in hard disk drives. In particular, the effect of non-uniform lubricant film distributions on head/disk interface dynamics are studied. The disks with lubricant on one half of disk surface thicker than the other half were used in this study. The dynamics of sliders is monitored using acoustic emission (AE) and the interactions between the slider and disk are investigated experimentally. The disks were also examined with a scanning micro-ellipsometer before and after each test. Complicated slider responses were observed and clarified. In addition, it was found that the periodic lubricant film thickness modulations or non-uniformity caused by the slider-disk contact interactions could be observed. It is suggested that this lubricant film thickness non-uniformity will be one of the technical issues in order to achieve ultra-low head/disk contact interface of less than 10 nm.     

Thermal Stability,Optical Transmittance,and Refractive Index Dispersion of La2O3–Nb2O5–Al2O3 Glasses

La₂O₃–Nb₂O₅–Al₂O₃ high‐refractive‐index glasses were fabricated by containerless processing, and the glass‐forming region was determined. The thermal stability, density, optical transmittance, and the refractive index dispersion of these glasses were investigated. All the glasses were colorless and transparent in the visible to near infrared (NIR) region and had high refractive index with low wavelength dispersion. Some of these glasses were found to have significantly high glass‐forming ability. These results indicate that the ternary glasses are suitable for optical applications in the visible to NIR region. The effects of the substitution of Al₂O₃ for Nb₂O₅ on optical properties were discussed on the basis of the Drude–Voigt equation. It was suggested that the substitution of Al₂O₃ for Nb₂O₅ increased the molecular density and suppressed a decrease in the refractive index, even when both the average oscillator strength and inherent absorption wavelength decreased in La₂O₃–Nb₂O₅–Al₂O₃ glasses. These results are helpful for designing new optical glasses controlled to have a higher refractive index and lower wavelength dispersion.     

Study on flow-induced vibration of head–disk assembly mechanisms in actual hard disk drive

Achieving ultra-high magnetic-recording density in hard disk drives (HDDs) requires clarification of flow-induced vibration issues. In particular, it is necessary to reduce the flow-induced disk vibration called disk flutter. Thus far, however, there has been no experimental research related to disk flutter in actual HDDs. For this study, therefore, the disk-flutter issues have been studied experimentally, using an actual 2.5-in. HDD with one disk and two magnetic heads. The aim was to study the effect of operating magnetic-head mechanisms on flow-induced disk flutter. This study evaluated disk flutter as well as static pressure distribution in the actual HDD, by taking measurements while changing the operating modes of the magnetic-head mechanism as well as the number of operating air-bearing sliders. The study demonstrated that the disk-flutter amplitude increases and its frequency decreases when the magnetic-head mechanisms are operating. It was also found that the amount of decrease in the disk-flutter frequency depends on the number of operating air-bearing sliders whose amplitude increase varies with the specific operating mode of the head mechanisms, such as whether it is in track-following or seek modes. In addition, operation of the magnetic-head mechanisms generated non-uniform static pressure distribution within the HDD. These factors suggest that a decrease in disk-flutter frequency results from the slider-coupled vibration and an increase in disk-flutter amplitude results from the static pressure changes as well as air-following changes, as these vary with the actual operation of the disk head mechanism. From these experimental results, it appears that the disk-flutter issues in actual HDDs should be considered as a system that includes the operation of the magnetic-head mechanisms and disk-coupled vibration.     

Conformation-function relationship of vitamin D: conformational analysis predicts potential side-chain structure

In previous studies, we have grouped regions in space occupied by the vitamin D side chain into four: A, G, EA, and EG. We showed that the receptor (VDR) affinity of 1alpha,25-dihydroxyvitamin D3 derivatives increases, in terms of side-chain region, in the order EG, G, A, and EA. We called this the active space group concept. In the present study, we used this active space group concept to analyze the conformation-activity relationship of about 40 representative potent 1alpha,25-dihydroxyvitamin D3 analogues. We initially listed structural modifications in the side chain of potent vitamin D analogues and estimated their potency factor. Possible side-chain conformations of representative analogues were calculated by the molecular mechanics method and plotted on a dot map compared with the regions A, G, EA, and EG. The cell-differentiating potency of the analogues was correlated with our active space group concept with few exceptions. Among potent analogues with a natural configuration at C(20), the side chains of those with a 22-oxa, 22-ene, 16-ene, or a 18-nor modification were located in front of region EA (termed F). The side chains of the most potent 20-epi-22-oxa-24-homovitamin D analogues were concentrated at the left side of the EA region (L-EA). Thus, the side chains of almost all potent analogues were distributed around the EA region, and potency increased in the order A, F, EA, and L-EA.     

Broadband infrared fluorescence in Er-doped BaO–SiO2 glasses

Er³⁺-doped SiO₂ glasses with or without BaO were fabricated by containerless processing. Scanning electron microscope observations and the scan profiles of electron-probe microanalysis demonstrated that the Ba-silicate glass was homogeneous and no aggregation of Er³⁺ ions occurred. The infrared fluorescence at around 1.55 μm from Er³⁺ in the Ba-silicate glass excited by a 980-nm laser was broader and its lifetime was longer than that of the silica glass, indicating the difference in the local structures around Er³⁺ ions between the Ba-silicate and silica glasses; this was supported by Raman scattering measurements. These results demonstrated that the Ba-silicate-glass system might be a new candidate for a host glass for Er³⁺-doped fiber amplifiers.     

Process synthesis by task assignment

An approach by task assignment is presented to determine processing system structures in chemical process design. For given design conditions of major subsystems, which were specified by the results of basic or applied research, a basic flowsheet is determined by task assignments on energy recovery and material flow transportation. An illustrative example shows the usefulness of the present method.     

Optimal design of linear control systems by an interactive optimization method

When designing linear control systems, one of the most difficult problems is that the designer almost has no theoretical basis for the determination of proper parameters in order to obtain a system with desired specifications. Poles and directions of eigenvectors in the pole assignment method or weighting matrices of the quadratic criterion function in the optimal regulator method are such parameters. The designer has to determine them by trial-and-error using computer simulation. The purpose of this paper is to propose an approach to helping determine proper parameters in linear control system design by the state space methods. In the case where the desired specifications are not given explicitly, the approach applies an interactive optimization method called the Interactive Simplex method to search the most suitable parameters directly in the parameter space. But, if the specifications are given explicitly, the design problem can be formulated as a multiobjective optimization problem. In this case, weights which indicate relative importance of different specifications are introduced and the Interactive Simplex method is applied in the weight space to indirectly find the most appropriate parameters. The approach is implemented as part of a CAD system. The designer has only to make pairwise comparisons of response curves which are shown on a graphics display terminal in order to obtain the most preferred control system. Two illustrative examples are demonstrated to indicate the efficiency of the approach.