Determination of polyphosphates in products of animal origin: application of a validated ion chromatography method for commercial samples analyses

A reliable and accurate analytical method was developed and validated for the quantitative determination of polyphosphates (diphosphate, triphosphate, trimetaphosphate and tetrapolyphosphate) in products of animal origin (meat, dairy and fish products) by ion chromatography with suppressed conductivity detection. The chromatographic separations were accomplished by using an anion-exchange column eluted with a sodium hydroxide gradient. The method validation, performed according to Regulation 882/2004/EC and Decision 657/2002/EC, provided results conform with the European Directives with respect to linearity (R?>?0.996), specificity, precision (CV????4.5?%), recovery (ranging from 87.2 to 101.1?%), detection and quantification limits and ruggedness. The method reliability was confirmed evaluating the method measurement uncertainty, lower than 7.5?% and by proficiency test results. Finally, the method ability to discriminate samples treated from those not-treated with polyphosphates was verified by analyzing commercial samples containing polyphosphates (cooked ham, wurstel, corned beef, processed cheese and surimi) or treated in-house with polyphosphates (pangasius fillets, shrimps and cuttlefishes).     

Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

Unconventional method used in synthesis of polyphosphoesters

Polyphosphonates, polyphosphates, polyarylazophosphonates and polyarylazophosphates were synthesized by a new alternative to the classical phase transfer catalysis, respectively, the modified inverse phase transfer catalysis (IPTC) polycondensation of various phenylphosphonic (phosphoric) dichlorides (phenylphosphonic dichloride, phenylphosphoric dichloride, p-chlorophenylphosphoric dichloride) with bisphenols: bisphenol A, tetrabromobisphenol A, bis-(4-hydroxyphenyl)methane (bisphenol F), 4,4′-dihydroxyazobenzene. The polymers were characterized by infrared spectroscopy and magnetic resonance (¹H-NMR, ³¹P-NMR, ¹³C-NMR) spectroscopy. Yields in the range of 63.5–85% and molecular weights (M _w) of ~2,000–8,200 g mol^?1 were obtained. Polyphosphonates were stable up 210–270 °C and polyphosphates up 190–220 °C in air atmosphere. For a correct estimation of the thermal behavior of similar compounds, a kinetic analysis using a modified version of Non Parametric Kinetic method for representative polyphosphonate and polyphosphate was realized. The studies made on the hydrolytic degradation of the synthesized polyphosphates show that the most stable polymer under alkali-catalyzed degradation is the polyphosphate obtained by IPTC of phenylphosphoric dichloride and bisphenol A.     

On the preparation of porous crosslinked poly(ethylene dimethacrylate esters): Polymers and copolymers

Macroreticular polymers and copolymers based on poly(ethylene glycol dimethacrylate esters) possessing a permanent porosity (white opaque beads, 40–60% porosity, 354 m²/g, the apparent density less than 1.060 g/mL, etc.) were prepared. The influence of the porogen thermodynamic quality and its weight fraction used in the polymerization mixture on the bead structure was also studied. The porous structure of the matrices was investigated and proved by SEM analyses, the N₂ adsorption (BET) method, etc. The thermal degradation mechanism of the macroreticular beads based on dimethacrylate esters shows that the thermal stability of samples depends on the monomer structure, i.e., the chain length between the two vinyl groups. © 1996 John Wiley & Sons, Inc.     

FT-NIR spectroscopy for the quality characterization of apricots (Prunus armeniaca L.)

Abstract: The nondestructive assessment of apricot fruit quality (Bora cultivar) was carried out by means of FT-NIR reflectance spectroscopy in the wavenumber range 12000 to 4000 cm⁻¹. Samples were harvested at four different ripening stages and scanned by a fiber optical probe immediately after harvesting and after a storage of 3 d (2 d at 4 °C and 1 d at 18 °C); the flesh firmness (FF), the soluble solids content (SSC), the acidity (A), and the titratable acidity (malic and citric acids) were then measured by destructive methods. Soft independent modeling of class analogy (SIMCA) analysis was used to classify spectra according to the ripening stage and the storage: partial least squares regression (PLS) models to predict FF, SSC, A, and the titratable acidity were also set-up for both just harvested and stored apricots. Spectral pretreatments and wavenumber selections were conducted on the basis of explorative principal component analysis (PCA). Apricot spectra were correctly classified in the right class with a mean classification rate of 87% (range: 80% to 100%). Test set validations of PLS models showed R² values up to 0.620, 0.863, 0.842, and 0.369 for FF, SSC, A, and the titratable acidity, respectively. The best models were obtained for the SSC and A and are suitable for rough screening; a lower power prediction emerged for the other maturity indices and the relative predictive models are not recommended. Practical Application : The results of the study could be used as a tool for the assessment of the ripening stage during the harvest and the quality during the postharvest storage of apricot fruits.     

Solubility Limits of Cholesterol, Lanosterol, Ergosterol, Stigmasterol, and β-Sitosterol in Electroformed Lipid Vesicles

Here we use nuclear magnetic resonance to measure the solubility limit of several biologically relevant sterols in electroformed giant unilamellar vesicle membranes containing phosphatidylcholine (PC) lipids in ratios of 1:1:X DOPC:DPPC:sterol. We find solubility limits of cholesterol, lanosterol, ergosterol, stigmasterol, and β-sitosterol to be 65-70%, ~35%, 30-35%, 20-25%, and ~40%, respectively. The low solubilities of stigmasterol and β-sitosterol, which differ from cholesterol only in their alkyl tails, show that subtle differences in tail structure can strongly affect sterol solubility. Below the solubility limits, the fraction of sterol to PC-lipid in electroformed vesicles linearly reflects the fraction in the original stock solutions used in the electroformation process.     

Harmful dinoflagellate Ostreopsis cf. ovata Fukuyo: detection of ovatoxins in field samples and cell immunolocalization using antipalytoxin antibodies

Ostreopsis cf. ovata, a benthic dinoflagellate often blooming along the Mediterranean coasts, has been associated with toxic events ranging from dyspnea to mild dermatitis. In late September 2009, an Ostreopsis cf. ovata bloom occurred in the Gulf of Trieste (Northern Adriatic Sea; Italy), causing pruritus and mild dermatitis in beachgoers. An integrated study was initiated to characterize Ostreopsis cells by light and confocal microscopy, PCR techniques, immunocytochemistry, and high resolution liquid chromatography-mass spectrometry (HR LC-MS). The presence of Ostreopsis cf. ovata of the Atlantic/Mediterranean clade was unambiguously established by morphological and genetic analyses in field samples. Several palytoxin-like compounds (ovatoxin-a,-b,-c,-d,-e) were identified by HR LC-MS, ovatoxin-a being the most abundant (45-64 pg/cell). Surprisingly, no palytoxin was detected. For the first time, monoclonal and polyclonal antipalytoxin antibodies revealed the intracellular cytoplasmic localization of ovatoxins, suggesting their cross-reactivity with these antibodies. Since harmful dinoflagellates do not always produce toxins, the immunocytochemical localization of ovatoxins, although qualitative, can provide an early warning for toxic Ostreopsis cells before their massive diffusion and/or concentration in seafood.