安积伸：从设计“协奏”到设计“独奏”

从安积伸（Shin Azumi）第一次到英国算起，他和英国、和伦敦已经有了近15年的情结。安积伸早已成了各类媒体报道和机构介绍里频繁出现的名字，就连英国设计节的创始人之一约翰·索瑞（John Sorrell）在《Creative Island（创意之岛）》一书中也将其作为对英国创意产业有所影响的驻岛设计师予以了收录。安积伸目前依然在伦敦经营着自己“astudio”．一个从事产品、家具和空间设计的工作室。[第一段]     

Solubility of NiO in Al2O3

Solubility of NiO in Al₂O₃ was determined by electron probe microanalysisy A diffusion couple method was used by coupling an NiO-doped Al₂O₃ polycrystal to a pure single crystal of Al₂O₃. The solubility of NiO in Al₂O₃ in air was 230 wt ppm (157 at. ppm of cations) and 170 wt ppm (116 at. ppm) at 2073 and 1973 K, respectively. The solubility of NiO in Al₂O₃ obtained in this work was compared with our previous work of the solubility of MgO in Al₂o₃.     

Effect of copper pretreatment on the zincate process and subsequent electroplating of a protective copper/nickel deposit on the AZ91D magnesium alloy

To obtain a durable Ni coating with excellent adhesion strength on an AZ91D Mg alloy, a pretreatment was performed with a small amount of Cu²⁺ ions added to the activation bath used in the pretreatment prior to the plating process. In the pretreatment activation process, a high density Cu layer was deposited on both the α-phase and β-phase areas of the substrate accompanied with Mg dissolution. The Cu deposit acted as nucleation seeds for the Zn deposition in the following zincate process which provided a uniform and dense Zn layer almost completely covering the substrate. Then a thin Cu layer was electroplated on this zincated substrate as an undercoating for the succeeding electroplating with Ni. Cross-sectional scanning electron microscopy observations showed that the Cu deposited by the pretreatment enabled the deposition of a protective Ni layer with few defects. This structure also contributed to the improvement of adhesion strength and corrosion resistance as compared with the non-Cu added sample.     

Analysis of solid renal dysplasia by flow cytometry: malignant potential?

The iron-chelating agent desferrioxamine now finds extensive use in the treatment and diagnosis of aluminum-related diseases in renal patients. We review the chemistry and pharmacokinetics of desferrioxamine in chelation therapy for patients on hemodialysis.     

Multifocal micronodular pneumocyte hyperplasia: a distinctive pulmonary manifestation of tuberous sclerosis

We report a peculiar multifocal micronodular proliferation of pneumocytes occurring in a 24-yr-old woman with tuberous sclerosis and lymphangioleiomyomatosis. A computed tomographic scan of the chest demonstrated multiple minute nodules present throughout both lung fields. Histologically, the nodules were well demarcated, measured up to 1.6 mm in diameter, and were composed of thickened, fibrotic, alveolar septa lined by pleomorphic, type II pneumocytes. Positive immunohistochemical stains for keratin, BER-EP4, and surfactant, and negative immunohistochemical staining with an antibody recognizing Clara cells support an epithelial origin from type II pneumocytes. The absence of immunohistochemical staining for HMB45 suggests a histogenesis separate than the lesions of lymphangioleiomyomatosis. We failed to detect estrogen or progesterone receptors in either the lesions of lymphangioleiomyomatosis or the micronodular proliferations. Recognition of these unique lesions facilitates their distinction from other epithelial proliferations, particularly atypical bronchioloalveolar cell hyperplasia. This lesion appears to be a distinctive manifestation of tuberous sclerosis. It is probably hamartomatous.     

γ‐Butyrolactone‐processable high‐modulus poly(ester imide)s

γ‐Butyrolactone (GBL)‐processable high modulus heat‐resistant materials were developed in this work. The polyaddition of an ester‐containing tetracarboxylic dianhydride, i.e. hydroquinone bis(trimellitate anhydride) (TAHQ), and 2,2′‐bis(trifluoromethyl)benzidine (TFMB) in GBL resulted in gelation in the initial reaction stage. The incorporation of a methyl group to TAHQ (M‐TAHQ) allowed polymerization with TFMB in GBL and led to a homogeneous poly(ester imide) (PEsI) precursor solution with a short pot life of 3 days, whereas a simple copolymerization approach using bulky/flexible comonomers to TAHQ/TFMB was less effective. PEsI precursors (PEsAAs) were prepared from TFMB, M‐TAHQ and a minor fraction of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) or a fluorene‐containing tetracarboxylic dianhydride. These PEsAA systems showed drastically improved GBL solution stability. In particular, the M‐TAHQ(80);6FDA(20)/TFMB copolymer system provided a PEsAA film with a very high light transmittance at 365 nm (>70%). A photosensitive film composed of this matrix resin and diazonaphthoquinone provided a clear positive‐tone pattern by development in a 2.38 wt% tetramethylammonium hydroxide aqueous solution at room temperature with a high dissolution contrast. The thermally cured PEsI film achieved a very high tensile modulus (>5 GPa) as the present target with other desirable properties, i.e. sufficient film flexibility, a relatively low coefficient of thermal expansion, a high T_g and low water absorption. The present materials can be promising candidates as novel buffer coat films in semiconductor applications. Copyright © 2011 Society of Chemical Industry     

Inventive payoff from R&D in Japanese industry: convergencewith the West

An attempt is made to determine if investment in R&D and the hiring of college-educated employees result in a higher rate of inventions. The relationship between the input of R&D and inventive output is studied in two samples of Japanese factories, 34 in 1982 and 44 in 1970. These results are compared with findings in a parallel American study. The correlations between R&D and inventive output are similar in Japan and America in the 1980s, despite some differences in the management of innovation in the two nations. Moreover, the most Westernized subsample of Japanese firms in the 1970s had correlations between R&D and invention similar to those observed in the American study. Thus, it is concluded that some degree of convergence may be taking place in R&D management strategies in the two nations     

Convergence of solutions of the MHD stability code ERATO

Convergence of solutions of the ERATO code is studied numerically. Some irregularities of the computed data points on a convergence curve are observed in our investigation. It is conjectured that these irregularities are due to inaccuracy of the equilibrium or to inappropriate choice of the equilibrium calculation meshes.     

Suggestion rates and sociotechnical systems in Japanese versusAmerican factories: beyond quality circles

Available information for two samples of factory organizations on the US and Japan are compared. Japanese factories are found to differ systematically from those in America in terms of several characteristics. These include marketing outputs, input of materials, machine automation, methods of production, human resource development, motivating incentives, and willingness to work. Moreover, available data suggest that the Japanese plants are outperforming those in the American sample. It is proposed that one reason is the higher rate of suggestions by employees in Japan. Causes and consequences of suggestion rates in the two nations are studied