Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Removal of impurities from liquid solutions by vacuum desorption with solvent evaporation

Mass transfer with solvent evaporation in the vapor-liquid two-phase film evaporators used for the removal of undesirable impurities from liquid solutions at low pressure is studied. The average concentrations of solution components in the falling liquid film are determined. The most efficient operating conditions for impurity removal, in which the resistance to mass transfer is concentrated in the liquid phase, are found. Original Russian Text ? V.N. Babak, T.B. Babak, L.P. Kholpanov, 2008, published in Teoreticheskie Osnovy Khimicheskoi Tekhnologii, 2008, Vol. 42, No. 6, pp. 654–670.     

A New Algorithm for the Elimination of Common Subexpressions in Hardware Implementation of Digital Filters by Using Genetic Programming

A new algorithm based on Genetic Programming (GP) for the problem of optimization of Multiple constant Multiplication (MCM) by Common Subexpression Elimination(CSE) is developed. This method is used for hardware optimization for DSP systems. A solution based on Genetic Programming is shown in this paper. The performance of the technique is demonstrated in one- and multi-dimensional digital filters with constant coefficients.     

On development of a finite dynamic element and solution of associated eigenproblem by a block Lanczos procedure

The paper first presents the details of the development of a new six-noded plane triangular finite dynamic element. A block Lanczos algorithm is developed next for the accurate and efficient solution of the quadratic matrix eigenvalue problem associated with the finite dynamic element formulation. The resulting computer program fully exploits matrix sparsity inherent in such a discretization and proves to be most efficient for the extraction of the usually required first few roots and vectors, including repeated ones. Most importantly, the present eigenproblem solution effort is shown to be comparable to that of the corresponding finite element analysis, thereby rendering the associated dynamic element method rather attractive owing to superior convergence characteristics of such elements, presented herein.     

A generalized continuum theory for multiphase suspension flows

A continuum theory for multiphase particulate suspensions in a fluid media is formulated. The generalized fundamental balance laws for the particulate phases as well as for the continuous suspending fluid phase are presented. The thermodynamics of a multiphase system is studied and the method of Lagrangian multipliers is employed to include the constraints of incompressibility of materials of the constituents and the criterion for fully saturated media. Constitutive equations are developed which include microrotational and microdilatational effects. The basic equations of motion of different phases are derived and discussed. Special considerations are given to the case of incompressible constituents. Examples of applications of the present theory to dilute suspension flows and multiphase sedimentations are also discussed.     

On the modal incremental dynamic analysis

In this article a new technique for the dynamic response of structures is investigated. This applied procedure can predict the approximate seismic performance of the structures and it is fast, inexpensive and results are reasonably acceptable. In fact, this novel method logically combines two different techniques, ‘incremental dynamic analysis (IDA)’ and ‘modal pushover analysis (MPA)’, presented by other researchers. This method will take advantage of both methodical ideas such as equivalent single degree of freedom of multi‐degree structures and the implementation of different scaled level of an earthquake record to the provided equivalent SDF structure. Using this procedure, simple approximate curves that present a realistic linear and non‐linear seismic behaviour of the structure due to the applied scaled level of earthquakes can easily be extracted. In this investigation, several four‐, eight‐ and 12‐storey structures are specified as the example models and are dynamically analysed. Next, three different scaled earthquakes, El Centro, Northridge and San Fernando, are applied to each example problem. The results of the presented technique, modal incremental dynamic analysis (MIDA), are then compared with the IDA method. Comparison of the results reveals good accuracy in building seismic demands evaluation. Finally, it is also shown that the MIDA method is simple enough to be carried out on most personal computers and the authors believe this technique will serve design engineers working in real design conditions. Copyright © 2005 John Wiley & Sons, Ltd.     

Agent-oriented techniques for network supervision

This paper presents the results of the Réseau futé (smart net) project, the goal of which is to use distributed AI and multi-agent techniques for network management and supervision. More precisely, these techniques have been applied to the partial automation of the dynamic processing (what is known about a network is always incomplete and can change at any time) of alarms and of various event notifications received by network management platforms. The system that we propose is able for example to automatically handle some alarms or to filter events of no-interest for a given operator. To achieve this goal, an assistant, or interface agent according to the model proposed by Patti Maes [MK93], has been realized. The goal of the assistant is first to learn, by observation, the behavior of the network supervision operator and second to reproduce such a behavior when the conditions in which the behavior has been learned are detected again. The learned information are stored using chronicles [Gha94]. A chronicle is a data-structure allowing programmers to represent sequences of events while taking temporal knowledge into account. Our assistant has been implemented and tested within Magenta which is a program, written in Smalltalk, that simulates (in a simplified way) a network management platform. This program respects roughly the gdmo and cmis standards.     

An integrated methodology to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes

Today, air pollution, smoking, use of fatty acids and ready‐made foods, and so on, have exacerbated heart disease. Therefore, controlling the risk of such diseases can prevent or reduce their incidence. The present study aimed at developing an integrated methodology including Markov decision processes (MDP) and genetic algorithm (GA) to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes. First, the efficiency of GA is evaluated against Grey Wolf optimization (GWO) algorithm, and then, the superiority of GA is revealed. Next, the MDP is employed to estimate the risk of cardiovascular disease. For this purpose, model inputs are first determined using a validated micro‐simulation model for screening cardiovascular disease developed at Tehran University of Medical Sciences, Iran by GA. The model input factors are then defined accordingly and using these inputs, three risk estimation models are identified. The results of these models support WHO guidelines that provide medicine with a high discount to patients with high expected LYs. To develop the MDP methodology, policies should be adopted that work well despite the difference between the risk model and the actual risk. Finally, a sensitivity analysis is conducted to study the behavior of the total medication cost against the changes of parameters.     

Pd/Cu-Free Cobalt-Catalyzed Suzuki and Heck Using Green Bio-Magnetic Hybrid and DFT-Based Theoretical Study

Catalysis Letters - Several highly efficient and magnetically recyclable cobalt catalytic systems were prepared using magnetic chitosan and some safe and available organic compounds...