Pd/Cu-Free Cobalt-Catalyzed Suzuki and Heck Using Green Bio-Magnetic Hybrid and DFT-Based Theoretical Study

Catalysis Letters - Several highly efficient and magnetically recyclable cobalt catalytic systems were prepared using magnetic chitosan and some safe and available organic compounds...     

Applying gravitational search algorithm in the QoS-based Web service selection problem

With the growing use of service-oriented architecture for designing next generation software systems,the service composition problem and its execution complexity have become even more important in resp...     

One-pot synthesis of hematite-alumina hollow sphere composite by ultrasonic spray pyrolysis technique with high adsorption capacity toward PAHs

A hybrid nanocomposite of alumina and hematite was synthesized by ultrasonic spray pyrolysis technique. The study of microscopic images, mapping analysis, and XRD patterns revealed that the Al₂O₃ – Fe₂O₃ nanocomposite was composed of separated spherical particles with a thin layer ball-shaped structure that metal oxides are uniformly distributed in the wall of hollow sphere particles, led to a coherent and monotonous construction. A series of coefficients of equilibrium sorption of polycyclic aromatic hydrocarbons (PAHs) as hazardous materials were measured on the prepared composite material in a batch technique. The free or pure Al₂O₃ or Fe₂O₃ showed negligible removal efficiency for the mentioned analytes. The various significant variables, such as initial analyte concentration, solution pH, adsorbent dose, and contact time to remove analyte, were studied in the aqueous solutions. Adsorption data were modeled to Langmuir, Freundlich, and Temkin isotherms, and a good correlation found in the case of Langmuir isotherm and adsorption capacity for anthracene, phenanthrene, and naphthalene were 370, 333, and 322 mg g^?1, respectively. Investigation of the kinetic models proved a pseudo-second-order, and the prepared adsorbent can be reused more than 7 times without a significant decrease of adsorption performance.     

Hypoglycemic effects of cocoa (Theobroma cacao L.) autolysates

Fat, alkaloid and polyphenol contents of two clones of cocoa (UIT1 and PBC 140) were removed and the remaining powder was autolyzed at pH 3.5 and 5.2. Based on the results, autolysates of UIT produced at pH 3.5 exhibited the highest ability to inhibit α-amylase activity. However, no α-glucosidase inhibition activity was observed under the conditions specified. Autolysates produced under pH 3.5 caused the highest amount of insulin secretion. In streptozotocin-diabetic rats, all cocoa autolysates significantly decreased blood glucose at 4 h. To assure that the results from the assays were not due to the polyphenols of cocoa autolysates qualitative and quantitative tests were applied. According to their results cocoa autolysates were found to be free from polyphenols. Analysis of amino acid composition revealed that cocoa autolysates were abundant in hydrophobic amino acids. It can be suggested that besides other compounds of cocoa, its peptides and amino acids could contribute to its health benefits.     

Physicochemical properties of cross-linked-annealed wheat starch

Starch in its native form, may not be able to provide functional properties such as high or low temperatures and shear forces bearings expected in modern industries. Therefore, it is usually modified to make it compatible for different applications. The main aim of this research was to study the effects of dual modification using cross-linking and annealing on physicochemical properties of wheat starch. Therefore, starch was first cross-linked using different levels of POCl₃ (0, 0.1, 0.2, 0.4?%, w/w, starch basis) and then annealed at 40?°C for 72?h. Scanning electron micrographs showed the presence of some spots on the granules of the dual-modified samples. The results of differential scanning calorimetry showed that the onset, peak and conclusion temperatures and enthalpy increased upon dual modification. The X-ray diffraction pattern of the modified samples remained unchanged while water solubility and swelling decreased. The results of rapid visco analyzing showed lower peak, setback, breakdown and final viscosities for the dual-modified samples. These samples produced stronger gels as determined using a texture analyzer. In total, annealing of the cross-linked starch could enhance some of its functional properties for further applications.     

Polystyrene-attached graphene nanolayers by reversible addition-fragmentation chain transfer polymerization: a grafting from epoxy groups with various densities

Graphene oxide was chemically functionalized with a modifier synthesized from coupling reaction of ethylenediamine and 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid in low and high graft densities. Then, the modified graphenes were used in grafting from reversible addition-fragmentation chain transfer polymerization of styrene. Successful synthesis and grafting of modifier was approved by proton nuclear magnetic resonance and Fourier transform infrared spectroscopy (FTIR). Also, FTIR, X-ray photo electron spectroscopy, and Raman spectroscopy were used to confirm the successful grafting of modifier moieties. Molecular weight and polydispersity index of attached polystyrene chains were studied by size exclusion chromatography. Thermogravimetric analysis was used to investigate the degradation temperatures, char contents, and graft ratios. Weight ratio of modifier in modified graphenes is calculated to be 4.93 × 10^?2 and 12.23 × 10^?2 for low and high graft densities. Also, molar ratio of modifier is 121.22 and 300.71 μmol/g respectively. Scanning electron and transmission electron microscopies show that graphite layers with flat surface were wrinkled during the oxidation process and also polystyrene-grafted graphenes are observed as opaque layers.     

Emergy-based life cycle assessment (Em-LCA) for sustainability appraisal of infrastructure systems: a case study on paved roads

Civil infrastructure systems are critical assets that are subjected to damage, service-life deterioration, and increasing maintenance and rehabilitation cost. Effective infrastructure management and principles of sustainable development can help to find an optimal compromise between economic growth and environmental protection for all stakeholders. Colloquially, sustainability refers to meeting triple-bottom-line (TBL) performance objectives including environmental protection, economic prosperity, and social acceptability and equity as a result of short- and long-term policy decisions. In this paper, a comprehensive framework based on the integration of emergy synthesis and life cycle assessment (LCA) has been investigated for a public infrastructure system. The main purpose of the applied method, emergy-based LCA (Em-LCA), is to facilitate an informed decision making process for different asset management scenarios, by identifying and quantifying the attributes of TBL impacts over the life cycle of a civil infrastructure system. As a case study, Em-LCA framework has been applied to evaluate the sustainability of two different scenarios for a road construction project in interior British Columbia, Canada. The results indicate that Em-LCA offers a good understanding to address sustainability issues in infrastructure systems and provides quantitative and transparent results to facilitate informed decision making for asset management.     

Application of the dry‐spinning method to produce poly(ε‐caprolactone) fibers containing bovine serum albumin laden gelatin nanoparticles

We designed and manufactured a polymeric system with combined hydrophilic–hydrophobic properties by loading gelatin nanoparticles (GNPs) containing bovine serum albumin (BSA) into poly(ε‐caprolactone) (PCL) fibers. Our ultimate goal was to create a device capable of carrying and releasing protein drugs. Such a system could find several biomedical applications, such as those in controlled release systems, surgical sutures, and bioactive scaffolds for tissue engineering. A two‐step desolvation method was used to produce GNPs, whereas PCL fibers were produced by a dry‐spinning method. The morphological, mechanical, and thermal properties of the produced system were investigated, and the distribution of nanoparticles both inside and on the surface of the fibers was examined. The effect of the particles on the biodegradability of the fibers was also evaluated. In vitro preliminary tests were performed to study the release of BSA from nanoparticle‐laden fibers and to compare this with its release from free nanoparticles. Our results indicate that the distribution of particles inside the fibers was quite homogeneous and only a few of them were present on the surface. The presence of the particles in the fibers did not affect the thermal properties of the PCL polymer matrix, although it created voids that affected the degradation characteristics so the PCL fibers favored faster erosion compared to the plain fibers. Preliminary results indicate that the release from GNP‐laden fibers occurred much more slowly compared to that in the free GNPs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44233.     

Comparison of chitosan–gelatin composite and bilayer coating and film effect on the quality of refrigerated rainbow trout

The effect of chitosan–gelatin coating and film on the rancidity development in rainbow trout (Oncorhynchus mykiss) fillets during refrigerated storage (4 ± 1 °C) was examined over a period of 16 days. Composite and bilayer coated and film wrapped fish samples were analysed periodically for microbiological (total viable count, psychrotrophic count) and chemical (TVB-N, POV, TBARS, FFA) characteristics. The results indicated that chitosan–gelatin coating and film retained their good quality characteristics and extend the shelf life of fish samples during refrigerated storage .The coating was better than the film in reducing lipid oxidation of fillets, but there was no significant difference between them in control of bacterial contamination.