Wireless Personal Communications - Software Defined Networks (SDNs) have accelerated and simplified the management, configuration and error detection in today’s networking systems. However,... 相似文献
Radiative transfer theory is used to calculate the incoherent effective reflectivity (e) for a multilayer lossy dielectric medium backed by a conducting plate. The theoretical results of this formulation are compared with that of the coherent approach. Several test cases are presented to show the characteristics of e as a function of thickness, and dielectric constant of the dielectric layers, and frequency. The results can ultimately be used in nondestructive dielectric thickness measurement. 相似文献
Six mixed matrix membranes (MMMs) were prepared using zeolites of 4A and ZSM-5 incorporated in polyimide of Matrimid 5218. Effects of filler type on membrane morphology and pervaporation performance of MMMs were investigated using isopropanol dehydration. In addition, effects of operating temperature (30, 40, 50, and 60 °C), feed water concentration (10, 20, 30, and 40 wt.%) and permeate side pressure (0 and 15 torr) on pervaporation performance were studied. Scanning electron microscopy (SEM) analysis showed there were good adhesion between the fillers and the polymer matrix. Zeolite 4A has a better contact with the polymer phase and thereby nearly no void is formed in the MMM structure. Pervaporation were performed based on L16 array of Taguchi method for design of experiments. The results showed that the best separation condition is achieved at temperature, feed water concentration, and permeate pressure of 30 °C, 10 wt.% water and 0 torr, respectively. Selectivities of zeolites 4A and ZSM-5 filled MMMs were calculated as 8991 and 3904 compared with 1276 measured for the neat Matrimid 5218 membrane. Permeation rates of the zeolite 4A and ZSM-5 filled MMMs and the neat polymeric membrane were found to be 0.018, 0.016, and 0.013 kg/m2 h, respectively. 相似文献
Nowadays, automatic speech emotion recognition has numerous applications. One of the important steps of these systems is the feature selection step. Because it is not known which acoustic features of person’s speech are related to speech emotion, much effort has been made to introduce several acoustic features. However, since employing all of these features will lower the learning efficiency of classifiers, it is necessary to select some features. Moreover, when there are several speakers, choosing speaker-independent features is required. For this reason, the present paper attempts to select features which are not only related to the emotion of speech, but are also speaker-independent. For this purpose, the current study proposes a multi-task approach which selects the proper speaker-independent features for each pair of classes. The selected features are then given to the classifier. Finally, the outputs of the classifiers are appropriately combined to achieve an output of a multi-class problem. Simulation results reveal that the proposed approach outperforms other methods and offers higher efficiency in terms of detection accuracy and runtime.
A steam generator mock-up has been assembled for round-robin (RR) studies of the effectiveness of currently practiced inservice inspection technology for detection of current-day flaws. The mock-up will also be used to evaluate emerging inspection technologies. The 3.66 m (12 ft)-tall mock-up contains 400 tube openings, each consisting of nine test sections that can be used to simulate current-day field-induced flaws and artifacts. Included in the mock-up are simulations of tube support plate (TSP) intersections and the tube sheet (TS). Cracks are present at the TSP, TS, and in the free span sections of the mock-up. For initial evaluation of the RR results, various eddy current methods, as well as multivariate models for data analysis techniques are being used to estimate the depth and length of defects in the mock-up. To ensure that the RR is carried out with procedures as close as possible to those implemented in the field, input was obtained from industry experts on the protocol and procedures to be used for the exercise. One initial assembly of the mock-up with a limited number of flaws and artifact has been completed and tested. A second completed configuration with additional flaw and artifacts simulations will be used for the round robin. 相似文献
A method for determining the dielectric properties of infinite half-space of generally lossy dielectric materials is described. This method utilizes the measurement of the admittance of a rectangular waveguide radiating into such dielectrics. It is shown that the real part of the admittance is relatively insensitive to the variations of the imaginary part of the dielectric constant. A numerical procedure is initiated which provides a simple and fast-converging approach for calculating the dielectric properties. This numerical procedure lends itself to implementation by personal computers. The theoretical formulation for the expression of the admittance of an open-ended waveguide and the numerical procedure are discussed in detail. Results of several measurements of freespace and lossy dielectric samples (rubber with carbon black) to verify the theory and the numerical scheme are given. The results give good agreement with other measurement schemes. Comments on the accuracy of the results are also provided 相似文献
Solutions for fields inside a slab of a generally lossy dielectric medium backed by a conducting plate, placed outside a waveguide-fed rectangular aperture, are used for the microwave nondestructive thickness measurement of such dielectric slabs. Upon construction of the waveguide terminating admittance expression from its variational form, an inverse problem is solved to extract the slab thickness form the conductance and susceptance in a recursive manner. A comparison between the experimental and theoretical results showed that the significance of higher order modes is minimal; hence, the dominant mode assumption is, in general, valid for describing the aperture field distribution. The validity of this assumption has led to the construction of a simple integral solution which is fast converging for generally lossy dielectric slabs, and may easily be implemented for real-time applications. Good agreement was obtained between the theoretical and experimental results. Multiple thicknesses of two different dielectric samples were estimated in this way 相似文献
Bioleaching of copper from the flue dust of the Sarcheshmeh copper smelter has been investigated. A series of continuous tests were carried out in two-stages of airlift bioreactors inoculated with the acidophilic, iron and sulfur oxidizing bacteria, initially derived from acid mine drainage. The effects of different parameters such as pulp density, retention time and temperature on the mesophile bioleach performance of the copper sulfide rich dust were evaluated after pre-leaching with dilute acid. Pulp densities of 2% and 4% gave the same oxidation–reduction potential in both reactors. However, increasing the average pulp density to 7% generated an unstable oxidation–reduction potential in the first bioreactor at 34 °C. Overall copper extractions calculated for 2%, 4% and 7% pulp densities were 90%, 89% and 86% with mean retention times of 2.7, 4 and 5 days, respectively. The process is net acid consuming and has the potential for further development and feasibility studies. 相似文献
The results of a study investigating the dielectric properties of rubber compounds and their constituents in the frequency range of 5 to 24 GHz are presented. A completely filled short circuited waveguide technique was used to conduct these dielectric measurements. The influence of carbon black content in rubber was investigated for carefully prepared rubber samples. The results showed that for all frequencies, the dielectric constant increases as a function of increasing carbon black content. The variation of dielectric constant values decreases as frequency increases. The presence of curatives in uncured rubber samples was also detected, which indicates the sensitivity of microwaves to the chemical reaction triggered by curatives 相似文献