A Light Weight Secure Communication Scheme for Wireless Sensor Networks

Wireless Personal Communications - The majority of security systems for wireless sensor networks are based on symmetric encryption. The main open issue for these approaches concerns the...     

Cesium salt of a heteropolyacid in nanotubular channels and on the external surface of SBA-15 crystals: preparation and performance as acidic catalysts

The Cs-salt of heteropolyacid with stoichiometry Cs_2.5H_0.5PW₁₂O₄₀ (CsHPW) was deposited selectively at the external surface of the SBA-15 silica microcrystals, inside its mesoporous channels and simultaneously at both location modes. The structure, texture and performance of these CsHPW/SBA-15 composites were compared with that of a reference bulk salt of the same composition. Location of CsHPW salt on the external surface of SBA-15 microcrystals leads to disintegration of its agglomerates increasing acidity of the catalytic phase. A novel preparation strategy consisting of grafting the basic Cs-species at the internal pores surface of SBA-15 stabilized the CsHPW phase inside the channels in form of 5–8 nm nanocrystals at 30–70 wt.% loadings. The catalytic tests demonstrated that insertion of the CsHPW catalytic phase inside the nanotubular channels of SBA-15 in combination with location of an additional amount of this phase at the external surface of SBA-15 microcrystals allows to increase the specific activity of this phase in MTBE synthesis, propionylation of anisole and alkylation of catechol with t-butanol by a factor of 1.5–3. This level of specific activity in combination with high total loading of catalytic phase >60 wt.% permit to get composite catalytic materials with catalytic activity higher by a factor of 1.2–1.5 with respect to the bulk CsHPW catalyst and stabilizing the catalytic phase against colloidization in polar media.     

Influence of Electric Poling on Pb0.9Bi0.1Fe0.55Nb0.45O3 Multiferroic

This paper analyzes the influence of electric poling on structure, magnetism, and ferroelectricity by temperature-dependent Raman scattering (180 K–500 K), magnetic susceptibility, and ferroelectric measurements on Pb_0.9Bi_0.1Fe_0.55Nb_0.45O₃ (PBFNO) multiferroic. X-ray diffraction (XRD) has confirmed the monoclinic structure for PBFNO sample before and after poling. Rietveld refined XRD for poled and unpoled sample shows the influence of electric poling on Fe-O1, Fe-O2, Nb–O, and Bi-O modes with small variation in the lattice parameters. The unpoled PBFNO exhibits broad and overlapping 10 active modes at room temperature (100 to 1300 cm^?1) at 147, 212, 255, 431, 479, 561, 700, 795, 835, and 1112 cm^?1. In case of a poled sample, Pb–O and Nb–O-Nb modes become more active compared to the unpoled sample. Changes observed in the temperature-dependent magnetic measurements, i.e., ZFC/FC and M-H loop, evidence the poling effects on Fe–O and Nb–O active modes. By poling the improvement in ferroelectric domain, ordering occurs, and it is confirmed by P-E loops. The consequences of numerous investigations on electric poling of PBFNO will provide the foundation for future device development and design.

     

Extraction of anthocyanins from red cabbage and purification using adsorption

There is an increasing interest in anthocyanins, as natural food colorants, in food products and also in pharmaceutical products due to their antioxidative potential. The present study deals with extraction and purification of anthocyanins from red cabbage. Conventional extraction methods of anthocyanin from plant material are non-selective and yield pigment solutions with large amounts of byproducts such as sugars, organic acids and proteins. Some of these impurities may accelerate anthocyanin degradation. Different extracting media were used and the mixture of 50% (v/v) ethanol and acidified water resulted in maximum anthocyanin content (390.6 mg/L). In order to obtain anthocyanins in a purified form, adsorption was carried out with six different adsorbents. Among these, non-ionic acrylic ester adsorbent, namely Amberlite XAD-7HP, showed the highest adsorption capacity (0.84 mg/mL of resin) and desorption ratio (92.85%). Adsorption results were found to be correlated best using the Langmuir isotherm equation especially at low temperature. The resulting anthocyanin solution after purification was free from sugars, which are the major cause for degradation of anthocyanin. No browning was observed and chroma increased by 27% compared to crude anthocyanin.     

Direct Experimental Observations on Concurrent Microstructure and Magnetic Property Developments in Non-Grain Oriented Electrical Steel

Non-grain oriented electrical steel, with minor in-grain orientation gradients, was subjected to interrupted tensile deformations and concurrent microtexture, magnetic property and residual stress measurements. After the upper yield point, clear signatures of mechanical stress relief were observed. Changes in orientation gradients led to annihilation of low-angle (1 to 3 deg) boundaries. Prior deformation compressive residual stresses became tensile and magnetic properties improved. Beyond an optimum true strain of 0.01, this boundary annihilation ceased, compressive stresses were generated, and magnetic properties degraded.     

Recent Progress of Innovative Perovskite Hybrid Solar Cells

Recently, innovative perovskite hybrid solar cells have attracted great interest in solar cell research fields, such as dye-sensitized solar cells, organic photovoltaics, thin-film solar cells, and silicon solar cells, because their device efficiencies are gradually approaching those of crystalline Si solar cells, and they can be fabricated by cheap low-temperature solution processes. Here, we review the recent progress of innovative perovskite hybrid solar cells. The introduction includes the general concerns about solar cells and why we need innovative solar cells. The second part explains the structure and the material properties of hybrid perovskite materials. We focus on why the hybrid perovskite materials can exhibit excellent solar cell properties, such as high open-circuit voltage. The third part introduces recent progress in innovative perovskite hybrid solar cells, in terms of device architecture and deposition methods for dense perovskite thin films with full surface coverage. The device architecture is important in attaining high power conversion efficiency; the device operating mechanism is dependent on the device structure; and the pinhole-free dense perovskite thin films with full surface coverage are crucial for achieving high efficiency. Finally, we summarize the recent progress in perovskite hybrid solar cells, and the issues to be solved, in the summary and outlook section.     

Design and analysis of low power high-speed 1-bit full adder cells for VLSI applications

This paper presents a low power and high speed two hybrid 1-bit full adder cells employing both pass transistor and transmission gate logics. These designs aim to minimise power dissipation and reduce transistor count while at the same time reducing the propagation delay. The proposed full adder circuits utilise 16 and 14 transistors to achieve a compact circuit design. For 1.2 V supply voltage at 0.18-μm CMOS technology, the power consumption is 4.266 μW was found to be extremely low with lower propagation delay 214.65 ps and power-delay product (PDP) of 0.9156 fJ by the deliberate use of CMOS inverters and strong transmission gates. The results of the simulation illustrate the superiority of the newly designed 1-bit adder circuits against the reported conservative adder structures in terms of power, delay, power delay product (PDP) and a transistor count. The implementation of 8-bit ripple carry adder in view of proposed full adders are finally verified and was observed to be working efficiently with only 1.411 ns delay. The performance of the proposed circuits was examined using Mentor Graphics Schematic Composer at 1.2 V single ended supply voltage and the model parameters of a TSMC 0.18-μm CMOS.     

Microstructure and residual stress distribution of similar and dissimilar electron beam welds – Maraging steel to medium alloy medium carbon steel

The influence of parent metal heat treatment condition on the residual stress distribution in dissimilar metal welds of maraging steel to quenched and tempered medium alloy medium carbon steel has been investigated. It has been observed that the residual stress distribution would be more compressive if the maraging steel is in soft condition. This is attributed to stress absorbing nature of highly yielding soft maraging steel.     

Synthesis and biological activity of novel thiazolidinediones

Novel compounds having a dual pharmacophore were synthesised and evaluated for their insulin sensitiser and anti-inflammatory properties in different animal models.