Zinc oxide-decorated multiwalled carbon nanotubes: a selective electrochemical sensor for the detection of Pb(II) ion in aqueous media

Journal of Materials Science: Materials in Electronics - Multiwalled carbon nanotubes, due to high conductivity, stability, and large specific surface area, have a potential ability to promote...     

CuxNi1-xO nanostructures and their nanocomposites with reduced graphene oxide: Synthesis,characterization, and photocatalytic applications

NiO nanostructure was synthesized using a simple co-precipitation method and was embedded on reduced graphene oxide surface via ultrasonication. Structural investigations were made through X-ray diffraction (XRD) and functional groups were confirmed by Fourier transform infrared spectroscopy (FTIR). XRD analysis revealed the grain size reduction with doping. Fourier transform infrared spectroscopy confirmed the presence of metal-oxygen bond in pristine and doped NiO nanostructure as well as the presence of carbon containing groups. Scanning electron microscopy (SEM) indicated that the particle size decreased when NiO nanostructure was doped with copper. BET surface area was found to increase almost up to 43 m²/g for Cu doped NiO nanostructure/rGO composite. Current-voltage measurements were performed using two probe method. UV–Visible spectroscopic profiles showed the blue and red shift for Cu doped NiO nanostructure and Cu doped NiO Nanostructure/rGO composite respectively. Rate constant for Cu doped NiO nanostructure/rGO composite found to increase 4.4 times than pristine NiO nanostructure.     

Electrophoretic deposition of graphene oxide on carbon brush as bioanode for microbial fuel cell operated with real wastewater

Microbial fuel cell (MFC) is a promising technology for simultaneous wastewater treatment and energy harvesting. The properties of the anode material play a critical role in the performance of the MFC. In this study, graphene oxide was prepared by a modified hummer's method. A thin layer of graphene oxide was incorporated on the carbon brush using an electrophoretic technique. The deoxygenated graphene oxide formed on the surface of the carbon brush (RGO-CB) was investigated as a bio-anode in MFC operated with real wastewater. The performance of the MFC using the RGO-CB was compared with that using plain carbon brush anode (PCB). Results showed that electrophoretic deposition of graphene oxide on the surface of carbon brush significantly enhanced the performance of the MFC, where the power density increased more than 10 times (from 33 mWm^?2 to 381 mWm^?2). Although the COD removal was nearly similar for the two MFCs, i.e., with PCB and RGO-CB; the columbic efficiency significantly increased in the case of RGO-CB anode. The improved performance in the case of the modified electrode was related to the role of the graphene in improving the electron transfer from the microorganism to the anode surface, as confirmed from the electrochemical impedance spectroscopy measurements.     

Fast determination of critical eluent composition for polymers by gradient chromatography

Gradient chromatography was applied in order to calculate the composition at elution for different methacrylates on normal phase columns. In addition the composition at elution was determined for polyethyleneoxide on a reverse phase column. It is shown that high molar mass polymers elute for a given homopolymer irrespective of their molar mass at the same eluent composition, which varies only slightly with gradient slope. In general the composition at elution in gradient chromatography is expected to be slightly lower than the true critical composition. For high molar mass polymers we found this composition to be close to the critical composition determined by isocratic experiments. The difference between the composition at elution and the true critical composition for a variety of polymethacrylates and for polyethyleneglycol was found to be only between 0.2 and 5%. Thus, after estimating the composition at elution, only a small number of additional isocratic experiments is needed to find the exact critical composition.     

PLATOP: a novel planarized trench isolation and field oxideformation using poly-silicon

A novel isolation scheme named planarized trench isolation and field oxide formation using poly-silicon (PLATOP) Is described. PLATOP is applicable to high-performance submicron VLSI since it results in encroachment-free shallow trenches, and planarized field oxide. The process offers poly silicon-filled deep trenches. The process also relies on noncritical lithography and novel etch processes to planarize the deposited poly-silicon from the top of the active areas, and oxidation to consume the poly-silicon in the field regions. Electrical results are presented proving the viability of the isolation scheme     

Some pharmacologic and toxicologic studies on Rhazya stricta decne in rats, mice and rabbits

1. This work examines some in vivo and in vitro pharmacologic and toxicologic effects of extracts of Rhazya stricta, a medicinal plant in the United Arab Emirates. 2. R. stricta extracts at doses of 0.1-10 mg reduced the mean arterial blood pressure (MBP) of anesthetized rats in a dose-dependent manner. The depressor effect was partially sensitive to atropine (5 microM). Although the MBP was reduced by 50% by both doses of extracts, the normal electrocardiogram pattern and the heart rate remained unaltered. 3. Acute treatment of rats with the lyophilized extract at doses of 4 g/kg produced a significant rise in insulin concentration. In streptozotocin-diabetic rats loaded orally with glucose (1 g/kg), R. stricta at doses of 8 g/kg produced significant decreases in plasma glucose concentration at 0.5 and 1 h after treatment. 4. Chronic treatment of rats and mice for 28 days with the lyophilized extract of R. stricta did not affect the plasma glucose or insulin concentration or any of the hematological or biochemical indices measured. 5. The extracts of R. stricta (0.5-4 g/kg) dose-dependently decreased the gastrointestinal transit time in mice by 4-50%. 6. The butanolic extract of R. stricta (1 and 2 g/kg) significantly reduced the carrageenan-induced increase in raw paw edema 3 and 4 h after the extract administration. 7. The rectal temperatures of normothermic and pyrexic rats were reduced significantly 0.5 and 1 h after administration of butanolic R. stricta at doses of 1 and 2 g/kg. 8. The butanolic extract of R. stricta at doses of 1 and 2 g/kg significantly increased the reaction time on the hot plate 30 and 60 min after administration to rats. 9. At concentration < 0.05 mg/ml (bath concentration), lyophilized water and butanol extracts of R. stricta potentiated the twitch responses induced by indirect electrical stimulation in the rat phrenic nerve diaphragm preparation. The responses were inhibited by concentrations > 0.05 mg/ml. Neostigmine (2 x 10(-4)M) did not alter these effects of the extracts. 10. R. stricta extracts dose-dependently decreased the force of contraction and heart rate of the isolated rabbit heart. Atropine (1 x 10(-5)M) had no effect on the inhibitory activity of these extracts. The lyophilized water extract (> 10 mg) and butanol extract (> 5 mg) produced irreversible inhibition and disturbances in the force of contraction and heart rate.     

Postintegration methods for numerical integration of non-linear dynamic equations of motion

The paper presents a family of methods with postintegration, for numerical integration of non-linear dynamic equations of motion of discrete systems. Both explicit and implicit algorithms of these methods are conditionally stable, but can give solutions of accuracy of a few orders higher than the known methods with preintegration, corresponding to them. A general analysis of stability and accuracy of single-step methods is carried out. The postintegration methods have been tested on a single-degree-of-freedom non-linear system.     

Synthesizing Energy-Efficient Embedded Systems with LOPOCOS

In this paper, we introduce the LOPOCOS (Low Power Co-synthesis) system, a prototype CAD tool for system level co-design. LOPOCOS targets the design of energy-efficient embedded systems implemented as heterogeneous distributed architectures. In particular, it is designed to solve the specific problems involved in architectures that include dynamic voltage scalable (DVS) processors. The aim of this paper is to demonstrate how LOPOCOS can support the system designer in identifying energy-efficient hardware/software implementations for the desired embedded systems. Hence, highlighting the necessary optimization steps during design space exploration for DVS enable architectures. The optimization steps carried out in LOPOCOS involve component allocation and task/communication mapping as well as scheduling and dynamic voltage scaling. LOPOCOS has the following key features, which contribute to this energy efficiency. During the voltage scaling valuable power profile information of task execution is taken into account, hence, the accuracy of the energy estimation is improved. A combined optimization for scheduling and communication mapping based on genetic algorithm, optimizes simultaneously execution order and communication mapping towards the utilization of the DVS processors and timing behaviour. Furthermore, a separation of task and communication mapping allows a more effective implementation of both task and communication mapping optimizationsteps. Extensive experiments are conducted to demonstrate the efficiency of LOPOCOS. We report up to 38% higher energy reductions compared to previous co-synthesis techniques for DVS systems. The investigations include a real-life example of an optical flow detection algorithm.     

Production of fungal enzymes and proteins from high salt cheese wheys

A fermentation procedure using wheys from buffalo milk, sweet rennet and salted wheys containing up to 15% NaC1, and based on the selection of salt-tolerant fungal cultures for production of microbial proteins and some economically important enzymes, is described. Certain strains of Aspergillus flavus, A. niger, A. ochraceus and A. terreus gave yields of mycelium ranging between 1.5 and 30 g on a dry weight basis. Strong proteolytic activities were exhibited by A. ochraceus, A. flavus and, to a lesser extent, by A. niger in the presence of salt up to 10% as final concentration. Powerful milk-clotting activities were also detected in culture supernatants of A. flavus and A. ochraceus. Extracellular β-galactosidases were released in to the culture fluids of these fungal strains with variable activities, depending upon the salt content of the growth medium. The application of the procedure is discussed.