Experimental and numerical assessment of gate-lag phenomena in AlGaAs-GaAs heterostructure field-effect transistors (FETs)

Gate-lag effects are characterized in AlGaAs-GaAs heterostructure field-effect transistors (HFETs) by means of measurements and numerical device simulations. Gate lag increasingly affects device switching at increasing ungated recess extension, suggesting that responsible deep levels be located at the ungated, recess surface of the HFET. Gate lag diminishes by making the off-state gate-source voltage less negative and by increasing the drain bias. Increasing the temperature makes the turn-on transient faster at low drain bias, while slightly delaying it at high drain bias. Numerical device simulations accounting for acceptor-like traps at the ungated surface predict gate-lag phenomena in good agreement with experiments, reproducing correctly the observed bias and temperature dependences. Simulations show that surface states behave, during the turn-on transient, as hole traps capturing holes attracted at the ungated surface by the negative trapped charge.     

L'accessibilité à des traitements pour les troubles anxieux au Canada: Un commentaire.

Responds to Gauthier (see record 2004-17185-003) who commented on the two articles by Koerner et al (see record 2004-17185-001) and by Roberge et al (see record 2004-17185-002. The purpose of this response is to discuss the issue of limited availability of mental health services for anxiety disorders in Canada. From a public health perspective, the authors emphasize the importance of gathering Canadian empirical data on the organization of mental health services for anxiety disorders. Specifically more research is needed on care requirements, and the financial and structural barriers that restrict access to mental health services at the regional, provincial and national levels. The authors also discuss the role of psychologists in improving mental health care in Canada. Cost-effectiveness studies conducted in interdisciplinary practice environments could demonstrate the value added by psychology in the organization of mental health care for anxiety disorders. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Predicting the performance of concrete structures exposed to chemically aggressive environment—Field validation

The behavior of two series of concrete slabs exposed to sulfate-bearing soils was investigated by a numerical model called STADIUM. In addition to the diffusion of ions and moisture, the model also accounts for the effects of dissolution/precipitation reactions on the transport mechanisms. The simulations yielded by the model were compared to the actual degradation of the slabs after 8 years of exposure. The microstructural alterations of concrete resulting from the penetration of magnesium, chloride and sulfate ions were studied by backscatter mode scanning electron microscope observations and energy-dispersive X-ray analyses. The comparison of both series of data indicates that the model can reliably predict the various features of the microstructural alterations of concrete.

---

Résumé Le comportement de deux séries de dalles sur sol en béton exposées à des sols chimiquement agressifs a été étudié à l'aide d'un code de calcul numérique appelé STADIUM. Ce modèle permet de décrire le transport couplé de l'eau et des ions dans des matériaux poreux non-saturés en prenant en considération l'influence des réactions chimiques. Les résultats des simultations de la dégradation du béton après huit ans d'exposition à des ions chlore, sulfate et magnésium. Les observations ont été réalisées par microscopie électronique à balayage. Des analyses par dispersion des rayons X ont également été effectuées. Les données démontrent clairement que le modèle perment de prédire avec précision le comportement du béton soumis à différents types d'agression chimique.

---

---

Editorial Note Laval University (Canada) is a RILEM Titular Member. Prof. J. Marchand was awarded the 2000 Robert L'Hermite Medal. He is Editor in Chief for Concrete Science and Engineering and Associate Editor for Materials and Structures. He participates in RILEM TC 186-ISA ‘Internal Sulfate attack’.     

Analytical results for the plectonemic response of supercoiled DNA

The DNA molecule is modeled as an elastic rod with bending and twisting rigidities, subjected to external tension and twist applied at one end, the other end being clamped. We study the plectonemic equilibrium of such a rod, taking into account the impenetrability constraint. Numerical solutions of this boundary value problem have previously shown that purely elastic models can reproduce the supercoiling response of the DNA molecule. Using a variational approach, we derive analytical formulae for the elastic response of the filament, and extend former numerical results.     

Primary afferent depolarizations of sensory origin within contact-sensitive mechanoreceptive afferents of a crayfish leg

Recordings from the central branches of single identified dactyl sensory afferent (DSA) neurons in a crayfish in vitro preparation were performed to study modifications of the sensory message occurring before the first central synapse. These afferents comprised hairs and force-sensitive mechanoreceptors with phasic and phasotonic response characteristics in the terminal segment (dactyl) of the crayfish leg. More than one afferent spike size was often observed in intracellular recordings from these afferents, thus indicating the presence of electrical coupling between the central processes of DSA fibers. Additionally, in identified DSA fibers with large spike sizes, primary afferent depolarizations (PADs) of up to 15 mV were observed, which sometimes triggered antidromic spikes in the afferent. Nevertheless, PADs were clearly inhibitory, because they shunted the afferent spikes. They exhibited the following properties. First, each PAD was preceded by an afferent spike from a neighboring hair, indicating that the PADs had a sensory rather than central origin. Second, PADs could follow high frequencies of afferent discharges without failure, a property suggestive of monosynaptic connections, but because PAD latencies varied by +/-0.5 ms it is more likely that they were mediated by a disynaptic pathway. Third, although PADs were evoked in an extremely reliable manner, their amplitude varied in a quantal manner. Most unitary PADs were the result of the release of < 12 quanta, the mean quantal content lying between 4 and 5; quantal size was large, approximately 1 mV. Fourth, PADs showed facilitation in some fibers, whereas in others they became much smaller when occurring at brief intervals. We suggest that PADs may be an efficient and parsimonious way to limit sensory inflow in space and time, allowing the crayfish to identify precisely both weak and strong mechanical stimuli.     

Effect of Surface Characteristics on Compressive Stress and Leakage Rate in Gasketed Flanged Joints

The effect of surface characteristics on compressive stress and leakage rate in gasketed flanged joints is discussed qualitatively and quantitatively based on experimental verifications. The sensitivity of the sealing phenomenon to the sealing surface characteristics, gas pressure and stress level is presented. Sealing surfaces produced with grinding, turning and milling procedures of different roughness values were the subject of the tests with three types of gasket, namely, PTFE (polytetrafluoroethylene), graphite, and spiral wound. The experimental results indicated that the roughness value Ra (average arithmetic height) has no effect on the sealing performance of the gasket, except for the ground type sealing surfaces. The platen (flange) surface forms were found to be the determining factor on the leakage rate and flow regime for gasketed flanged joints. It is shown that the surface characteristics have no effect on the leakage rate and on the gasket performance for the PTFE gasket at high stress levels. However, at low stress levels the rougher ground and milled sealing surfaces having radial channels on the surface produce larger leakage rates. The effect of surface characteristics, stress level, and gas pressure was more evident on the graphite and spiral wound gasket types, at both low and high stress levels. It is also shown that the leakage rate follows an exponential law as a factor of surface stress and gas pressure, for all sealing surface characteristics and gasket types. While there is little difference in the leakage rate for the PTFE gasket when the gasket stress level is increased by a factor of two, from S3 to S5, a substantial leakage rate reduction by a ratio of 17.5 times was observed for the graphite and spiral wound gaskets for most sealing surfaces. On the other hand, when increasing the helium gas pressure from 200 to 800 p.s.i., the leakage rate increased by 5 times for the PTFE, and up to10 times for the graphite and the spiral wound gaskets. It was determined that while molecular flow regimes can be achieved for the PTFE gasket for all sealing surfaces, the two other gasket types provided laminar flow under the same operating conditions.     

Oxidized Fullerene Derivatives Containing Hydroxyl, Nitro and Fluorine Groups

Oxidation of fullerene was performed with fuming nitric acid and a soluble orange compound was synthesized and identified as polyhydroxy-polynitro fullerene. The formation of fullerene derivatives containing oxygen and fluorine were attempted by different methods using F₂, HF aqueous solution and fuming nitric acid. Resulting compounds were generally characterized by X-ray diffraction and IR and NMR spectroscopy.