Bond graph modeling,design and experimental validation of a photovoltaic/fuel cell/ electrolyzer/battery hybrid power system

This work presents a complete bond graph modeling of a hybrid photovoltaic-fuel cell-electrolyzer-battery system. These are multi-physics models that will take into account the influence of temperature on the electrochemical parameters. A bond graph modeling of the electrical dynamics of each source will be introduced. The bond graph models were developed to highlight the multi-physics aspect describing the interaction between hydraulic, thermal, electrochemical, thermodynamic, and electrical fields. This will involve using the most generic modeling approach possible for managing the energy flows of the system while taking into account the viability of the system. Another point treated in this work is to propose. In this work, a new strategy for the power flow management of the studied system has been proposed. This strategy aims to improve the overall efficiency of the studied system by optimizing the decisions made when starting and stopping the fuel cell and the electrolyzer. It was verified that the simulation results of the proposed system, when compared to simulation results presented in the literature, that the hydrogen demand is increased by an average of 8%. The developed management algorithm allows reducing the fuel cell degradation by 87% and the electrolyzer degradation by 65%. As for the operating time of the electrolyzer, an increment of 65% was achieved, thus improving the quality of the produced hydrogen. The Fuel Cell's running time has been decreased by 59%. With the ambition to validate the models proposed and the associated commands, the development of this study gave rise to the creation of an experimental platform. Using this high-performance experimental platform, experimental tests were carried out and the results obtained are compared with those obtained by simulation under the same metrological conditions.     

A Measurement‐Based Approach for Designing Fixed‐Order Controllers for Unknown Closed‐Loop Architecture

This paper presents a new technique to design fixed‐structure controllers for linear unknown systems using a set of measurements. In model‐based approaches, the measured data are used to identify a model of the plant for which a suitable controller can be designed. Due to the fact that real processes cannot be described perfectly by mathematical models, designing controllers using such models to guarantee some desired closed‐loop performance is a challenging task. Hence, a possible alternative to model‐based methods is to directly utilize the measured data in the design process. We propose an approach to designing structured controllers using a set of closed‐loop frequency‐domain data. The principle of such an approach is based on computing the parameters of a fixed‐order controller for which the closed‐loop frequency response fits a desired frequency response that describes some desired performance indices. This problem is formulated as an error minimization problem, which can be solved to find suitable values of the controller parameters. The main feature of the proposed control methodology is that it can be applied to stable and unstable plants. Additionally, the design process depends on a pre‐selected controller structure, which allows for the selection of low‐order controllers. An application of the proposed method to a DC servomotor system is presented to experimentally validate and demonstrate its efficacy.     

The design of a collision avoidance system for use by Pilots operating on the airport ramp and in taxiway areas

Ground collisions have serious implications from both a safety and a commercial perspective. This paper reports on human computer interaction (HCI) research related to the advancement of a collision avoidance system, for use by Pilots operating on the airport ramp and in taxiway areas. Primarily, this paper focuses on the key findings of this research and the emerging HCI design solution.     

Blind spatial unmixing of multispectral images: New methods combining sparse component analysis,clustering and non-negativity constraints

Remote sensing has become an unavoidable tool for better managing our environment, generally by realizing maps of land cover using classification techniques. Traditional classification techniques assign only one class (e.g., water, soil, grass) to each pixel of remote sensing images. However, the area covered by one pixel contains more than one surface component and results in the mixture of these surface components. In such situations, classical classification is not acceptable for many major applications, such as environmental monitoring, agriculture, mineral exploration and mining, etc. Most methods proposed for treating this problem have been developed for hyperspectral images. On the contrary, there are very few automatic techniques suited to multispectral images. In this paper, we propose new unsupervised spatial methods (called 2D-Corr-NLS and 2D-Corr-NMF) in order to unmix each pixel of a multispectral image for better recognizing the surface components constituting the observed scene. These methods are related to the blind source separation (BSS) problem, and are based on sparse component analysis (SCA), clustering and non-negativity constraints. Our approach consists in first identifying the mixing matrix involved in this BSS problem, by using the first stage of a spatial correlation-based SCA method with very limited source sparsity constraints, combined with clustering. Non-negative least squares (NLS) or non-negative matrix factorization (NMF) methods are then used to extract spatial sources. An important advantage of our proposed methods is their applicability to the possibly globally underdetermined, but locally (over)determined BSS model in multispectral remote sensing images. Experiments based on realistic synthetic mixtures and real multispectral images collected by the Landsat ETM+ and the Formosat-2 sensors are performed to evaluate the performance of the proposed approach. We also show that our methods significantly outperform the sequential maximum angle convex cone (SMACC) method.     

Artificial intelligence implementation in the APS process diagnostic

Thermal spray process is a technique of coating manufacturing implementing a wide variety of materials and processes. This technique is characterized by up to 150 processing parameters influencing the coating properties. The control of the coating quality is needed through the consideration of a robust methodology that takes into account the parameter interdependencies, the process variability and offers the ability to quantify the processing parameter-process response relationships. The aim of this work is to introduce a new approach based on artificial intelligence responding to these requirements. A detailed procedure is presented considering an artificial neural network (ANN) structure which encodes implicitly the physical phenomena governing the process. The implementation of such a structure was coupled to experimental results of an optic sensor controlling the powder particle fusion state before the coating formation. The optimization steps were discussed and the predicted results were compared to the experimental ones allowing the identification of the control factors.     

Real-time wrist localization in color images based on corner analysis

Hand detection and gestures recognition have become very popular in recent human-computer interaction systems. Although several methods of hand detection have been proposed in the literature, they exist few methods that use the wrist as a factor of detection, others impose constraints on the length of the sleeves and on the orientation of the hand. In this work, we present a new two-stage algorithm of wrist localization designed for hand detection and gestures recognition systems. The first stage of the algorithm consists in separating the skin region containing the hand from the background, and in the second stage, the wrist is localized from the resulted skin mask. The main contribution of the proposed method is based on the analysis of corners along the contour of the skin masks to localize the wrist emplacement. Based on an evaluation on 437 color images with their ground-truth and three sets of skin masks, we compared our method with other efficient methods of literature and the results obtained were very satisfactory.     

A linear 60 GHz 65 nm-CMOS power amplifier realization and characterization for OFDM signal

A millimeter-wave Power Amplifier (PA) based on a 65nm CMOS technology from STMicroelectronics has been designed. The targeted feature is the unlicensed band around 60 GHz suitable for wireless personal area network application (WPAN). To optimize the linearity, the PA is designed under class A biasing to have an output compression point (OCP₁) close to its saturated Power (P _sat). S-parameters and large signal measurement results are demonstrated and compared with electromagnetic simulations. The PA offers a P _sat of 8.3 dBm, an OCP₁ of 6 dBm and a gain of 6.7 dB. The die area is 0.29 mm² with pads. Considering those results, one-tone simulations are not sufficient to characterize the linearity performances of the PA in its real conditions of use. Consequently, two-tone simulations are firstly performed. After, linearity figures of merit (FoM) are discussed applying an orthogonal frequency-division multiplexing (OFDM) modulated signal. The PA offers an adjacent channel power ratio (ACPR) of 15 dB and an error vector magnitude (EVM) of 20% at PA compression operating mode.     

Effect of Power Amplifier Nonlinearity on the Physical Layer Security of MIMO Systems

Wireless Personal Communications - This paper presents an analytical investigation on the effect of nonlinear high-power amplifiers on the physical layer security of multiple-input-multiple-output...     

Image-based truss recognition for density-based topology optimization approach

Structural and Multidisciplinary Optimization - Topology optimization is a tool that supports the creativity of structural-designers and is used in various industries, from automotive to...