gpuRIR: A python library for room impulse response simulation with GPU acceleration

Multimedia Tools and Applications - The Image Source Method (ISM) is one of the most employed techniques to calculate acoustic Room Impulse Responses (RIRs), however, its computational complexity...     

Experimental evaluation of geosynthetics as reinforcement for shotcrete

One of the commonly used stabilization systems for rock tunnels is shotcrete. This fine aggregate mortar is usually reinforced for improving its tensile and shear strength. In deep tunnels, its capacity to absorb energy has been recently considered for design purposes, as large displacements of the wall are expected. Two of the most used materials of reinforcement are steel welded-wire mesh and fibers (steel or polypropylene) in the shotcrete mix. This study presents the results and discussion of an experimental test program conducted to obtain the load-deformation curves of reinforced shotcrete, according to ASTM C 1550, using geosynthetics grids and geotextiles as alternative reinforcement materials. In addition, plain shotcrete and steel welded-wire mesh reinforced shotcrete specimens are also considered in the experimental program as benchmark cases. The experimental results are analyzed in terms of maximum strength and toughness. Results show that the use of geosynthetics as a reinforcement material is a promising alternative to obtain shotcrete with energy absorption capacity comparable with the most common reinforcement materials used.     

Changes in wine yeast storage carbohydrate levels during preadaptation,rehydration and low temperature fermentations

The metabolism of glycogen and trehalose was analysed in a wine yeast strain fermenting at 25 and 13 degrees C. Trehalose and glycogen degradation were completed during the lag phase of fermentation. Ammonia was taken up rapidly and once it had been reduced to negligible amounts, the synthesis of trehalose started. Glycogen followed a similar pattern. If trehalose synthesis was taken as a stress indicator, the fermentation at 13 degrees C could not be considered stressful because the maximum concentrations are similar at both temperatures. In industrial fermentations, and after a preadaptation in grape must for several hours at 18 degrees C, the lag phase was reduced significantly, and this may be why trehalose and glycogen were completely depleted at the beginning of the low temperature fermentation. Various preadaptation conditions were tested so that their influence on trehalose and glycogen degradation could be determined. The presence of fermentable carbon sources, such as glucose or fructose, triggered the mobilisation and use of trehalose. However, just increasing the osmotic pressure did not reduce the trehalose content. No such differences were observed in glycogen metabolism.     

Accuracy of BRT and Delvotest microbial inhibition tests as affected by composition of ewe's milk

The presence of drug residues in ewe's milk samples can be determined by microbial assays. The main limitation of these tests is the large number of false-positive results associated with them. False-positive results can be explained by the interaction of certain substances naturally existing in ewe's milk with the growth of the microorganism used in the test. In this study, milk chemical composition (fat, protein, lactose, total solids), somatic cell counts (SCCs), free fatty acid concentrations, and lactoperoxidase system components were determined in order to investigate their influence on the rate of false-positive results for the BRT and Delvotest microbiological inhibitor tests. Milk samples were obtained after morning milking of Manchega ewes at 15, 30, 45, 60, 75, 90, 105, 120, and 135 days after parturition. The animals did not receive any kind of treatment or medicated feed throughout the experiment. The false-positive rates for BRT and Delvotest were 3.75 and 2.4%, respectively. When the logistic regression model was applied, the percentages of total solids for positive samples were significantly different from those for negative samples (16.90 versus 18.42% for BRT, 16.05 versus 18.45% for Delvotest), while the SCC logarithmic transformation was significantly higher for the positive samples than for the negative samples (5.38 versus 5.11 log units for BRT, 5.32 versus 5.11 log units for Delvotest). Moreover, Delvotest-positive samples exhibited thiocyanate concentrations higher than those of Delvotest-negative samples (8.18 mg/liter versus 6.85 mg/liter). Further analyses are needed to confirm the possible presence of antimicrobial residues in this particular type of milk sample.     

A self contained Linux based data acquisition system for 2D detectors with delay line readout

This article describes a fast and self-contained data acquisition system for 2D gas-filled detectors with delay line readout. It allows the realization of time resolved experiments in the millisecond scale. The acquisition system comprises of an industrial PC running Linux, a commercial time-to-digital converter and an in-house developed histogramming PCI card. The PC provides a mass storage for images and a graphical user interface for system monitoring and control. The histogramming card builds images with a maximum count rate of 5 MHz limited by the time-to-digital converter. Histograms are transferred to the PC at 85 MB/s. This card also includes a time frame generator, a calibration channel unit and eight digital outputs for experiment control. The control software was developed for easy integration into a beamline, including scans. The system is fully operational at the Spanish beamline BM16 at the ESRF in France, the neutron beamlines Adam and Eva at the ILL in France, the Max Plank Institute in Stuttgart in Germany, the University of Copenhagen in Denmark and at the future ALBA synchrotron in Spain. Some representative collected images from synchrotron and neutron beamlines are presented.     

Phase equilibria of hydrates from ternary mixtures of methane + ethane + propane and methane + propane + carbon dioxide

Hydrate–liquid–vapour (HLV) equilibrium of aqueous clathrates formed from gas mixtures can be complex compared to hydrates formed with single guests. Typically, pressure and temperature are controlled to obtain these data, but for multicomponent systems, it is necessary to control/report more intensive variables, namely, composition. Metastability, manifested as impractically long experimental times, has been reported to be a challenge with some multicomponent systems. We present HLV equilibrium conditions of two ternary gas mixtures: methane + ethane + propane (90:7:3 molar ratio) and methane + propane + carbon dioxide (55:5:40 molar ratio). Conditions varied in the temperature range of 275–285 K and the pressure range of 1.24–4.75 MPa. Experimental standard uncertainties were on average 0.10 K and 0.005 MPa for methane + ethane + propane and 0.19 K and 0.005 MPa for methane + propane + carbon dioxide. Our technique allowed us to bypass the limitations reported in the literature and provided fast, reproducible HLV equilibria for gas-dominated systems.     

Metal Triflates Incorporated in Mesoporous Catalysts for Green Synthesis of Fine Chemicals

Strong Lewis acid SnTf-MCM-41 and SnTf-UVM-7 catalysts with unimodal and bimodal pore systems were prepared in a two-step synthesis in which the triflic acid (Tf) was incorporated into previously synthesized mesoporous tin-containing silicas. The Sn incorporation inside the pore walls was carried out through the Atrane method. The SnTf-UVM-7 catalysts were prepared by aggregating nanometric mesoporous particles defining a hierarchic textural-type additional pore system. Catalysts with different Si/Sn ratios in the range 21.8–50.8 for SnTf-MCM-41 and 18.4 for SnTf-UVM-7 were found to be efficient catalysts for the acylation of aromatics and heteroaromatics. Under microwave irradiation the reaction was possible even with acetic acid. The selectivity to the desired product (o-hydroxyacetophenone for phenol) or the unfavored three-substituted five ring heterocycles was dramatically increased under these conditions. The process is green, environmentally safe, and heterogeneous.     

Determination of bixin and norbixin in meat using liquid chromatography and photodiode array detection

The development of an analytical method that enables routine analysis of annatto dye, specifically bixin and norbixin, in meat tissue is described. Liquid-solid extraction was carried out using acetonitrile. Analysis was by HPLC with photodiode array detection using two fixed wavelengths (458 and 486 nm). The possibilities of ion trap mass spectrometry (MS) were also assessed. Method performance characteristics, according to Commission Decision 2002/657/EC, were determined, with recoveries between 99 and 102% and calibration curves being linear in the 0.5–10 mg kg^?1 range. The limit of quantification was 0.5 mg kg^?1.