Modelization of the whispering gallery mode in microgear resonators using the Floquet-Bloch formalism

In this paper, a two-dimensional (2-D) method describing the whispering gallery mode in a microgear resonator is presented. The microgear is a microdisk surrounded by a circular grating. The method, which is based on the Floquet-Bloch formalism, analytically describes the field within the disk and outside the grating. On the other hand, the field within the grating is calculated using a finite-difference scheme in polar coordinates. Matching the boundary conditions, it is possible to work in a forced oscillation regime or in a free oscillation regime (laser mode). The resonant wavelength and quality factor can then be deduced. Compared to the coupled mode theory and to 2-D finite-difference time-domain computations, the method is faster and more accurate. Moreover, a polarization effect of the microgear is demonstrated. The TE polarization experiences a Q-factor improvement contrary to TM polarization. Finally, microgear structures prove to be more efficient than micro flowers.     

Performance of a compact, hybrid optical evanescent-wave sensor for chemical and biological applications

We describe a hybrid evanescent-wave sensor component that we fabricated by using an integrated optical interferometer with a specially adapted photodetector array. The design of the interferometer is based on the use of tapered waveguides to obtain two intersecting collimated beams. Phase shifts can be measured with an angular precision of better than 10(-3) rad, which corresponds to a superstrate index change inferior of 10(-6) with our structure. The interest in the device as a chemical sensor is experimentally demonstrated. The same optical component could be used in a variety of other sensor applications, e.g., biological and immunological sensors.     

Integrated Optics for Astronomical Interferometry. III. Optical Validation of a Planar Optics Two-Telescope Beam Combiner

The optical characterization of a fiber-connected planar optics beam combiner dedicated to astronomical interferometry for two telescopes is presented. The beam combiner, fully integrated on a single 5 mm x 40 mm glass chip, is tested as the central part of an astronomical instrument. The single-mode waveguides are made by silver-ion-exchange technology upon glass substrates and provide spatial filtering, which improves the visibility measurement accuracy by selecting only the fundamental mode of the beams at the telescope focal plane. A global optical throughput of 43% is measured, and the sources of losses are identified and examined in detail. Solutions for improving this throughput are proposed. High and stable contrasts are obtained with a 1.55-mum laser diode (?96%) and with a white-light source (~92%) in the astronomical H filter (1.43 mum; 1.77 mum). The need for accurate control of differential instrumental polarization is demonstrated. In this context the intrinsic polarization-maintaining property of the planar optics component is characterized. This validation of the important potential uses of integrated planar optics should be valuable for future design of optical telescope arrays.     

Purification, characterization and amino acid sequencing of divergicin M35: a novel class IIa bacteriocin produced by Carnobacterium divergens M35

Carnobacterium divergens M35, isolated from a commercial sample of frozen smoked mussels, produces a new bacteriocin, divergicin M35, a class IIa bacteriocin. Divergicin M35 is sensitive to pronase-E, alpha-chymotrypsin and proteinase K, but not to trypsin and withstands thermal treatments up to 121 degrees C for 30 min. Divergicin M35 was extracted from the culture supernatant of C. divergens M35 using an SP-Sepharose cation-exchange column, desalted and purified on a C18 Sep-Pack column and further purified by reverse phase-high pressure liquid chromatography. This procedure allowed the recovery of 10% of the bacteriocin present in the culture supernatant with purity higher than 99%. Divergicin M35 had a molecular mass of 4518.75 Da as determined by mass spectrometry, a pI value of 8.3 and positive net charge (+3). The amino acid sequence of divergicin M35 was found to consist of 43 amino acid with four cysteine residues (Cys10, 15, 25, 43) and showed 80.5% homology with divercin V41 (80.5%) and 80.0% with bavaricin MN. Divergicin M35 showed powerful antilisterial activity, especially against Listeria monocytogenes and was also active against carnobacteria but not against strains of Lactococcus, Lactobacillus, Enterococcus, Bifidobacteria and Escherichia. Divergicin M35 production began in late exponential phase and reached a maximum activity of 65,000 AU/ml in early stationary phase. Initial broth pH, Tween 80 and acetate did not affect C. divergens M35 growth or divergicin production. This bacteriocin may be a potential tool for inhibiting L. monocytogenes in seafood products that do not usually undergo an adequate heat treatment.     

A case of meningioma appearing as a cyst with solid parietal nodule. Evaluation using computerized tomography and magnetic resonance

Bilateral sequential lung transplantation was complicated by pulmonary artery anastomotic stenosis and bilateral pulmonary thromboemboli. Pulmonary artery thrombus was eliminated by intrathrombotic but not by systemic administration of urokinase. The pulmonary emboli resulted in localized pulmonary infarctions, supporting the need for thrombolytic intervention to restore pulmonary perfusion in the absence of collateral bronchial blood flow after lung transplantation. Pulmonary artery stenosis was relieved by endovascular stenting, avoiding an early reoperative procedure. This case suggests that direct administration of thrombolytic agent may be superior to intravenous administration in the treatment of pulmonary thromboemboli. Pulmonary arterial anastomotic stenoses after lung transplantation can be relieved by endovascular procedures.     

Fabrication and test of an integrated optical magic T on a glasssubstrate

In this work, we demonstrate the first implementation of an integrated optical magic T. Such structure is designed to give, at the output, the sum and the difference of its two input optical signals using the multimode interference phenomena. The structure is fabricated using the ionic exchange technology on glass. The first obtained results verify the function of the magic T     

InP-based micromachined Mach-Zehnder interferometer stress sensors

 In the field of III–V-based compounds, new functionalities can be reached by integrating micromechanical structures with electro-optical functions, in order to fabricate Micro Opto Electro Mechanical Systems (MOEMS). A possible application is an InP-based integrated optical stress sensor. Such a system is based on a partly suspended waveguide that can be strained under the effect of an external stress. The photoelastic effect induces a phase shift that can be converted into an intensity shift of the signal if the device is configurated as a Mach-Zehnder interferometer. This system can be integrated monolithically with the optical source and the photodetector. The mechanical, photoelastic and optical properties of this structure has been simulated in order to configurate the alloy composition of the epitaxial layers and the geometry of the device. Micromachining processes have been developed in order to realize InP-based suspended microstructures by sacrificial layer etching and bulk micromachining. Preliminary results showed that the optical behaviour of the waveguides is close to the theoretical analysis. Characterisation of the complete interferometer is underway in our group. Received: 13 December 1996/Accepted: 18 December 1996     

Analyse théorique et caractérisation expérimentale ďune jonction Y intégrée utilisée comme capteur de déplacement

The coherent coupling of radiation modes in symmetric single-mode Y-junction excited by a single mode fiber is studied in this work. Using the bpm (beam propagation method) we find that the power splitting between the two outputs of the junction depends strongly on the fiber displacement with respect to the junction axis of symmetry. A GaAs/GaAlAs single mode junction is tested and the experimental measurements show a splitting ratio as high as 12 dB that could not be explained if the radiation field is neglected. The experimental results confirm the theoretical predictions that take into account the propagation of radiation modes in the structure. These results propose the structure to be used as an integrated optical displacement sensor with a sensitivity in the order of 5 dB/μm and a dynamic range within 4 to 5 μm.     

Acoustic, piezoelectric, and dielectric nonlinearities of AlN in coupled resonator filters for high RF power levels

Coupled resonator filters (CRFs) are the new generation of BAW filters recently designed for the front-end modules of mobile transmission systems. Looking for designers' requirements, CRF devices have been characterized and modeled. The model based on equivalent circuits relies on material constants such as stiffness and electro-coupling coefficients, and works only for linear-mode propagation. Because of their positions between antennas and power amplifiers, they often work under high RF power, inducing nonlinear response in the AlN piezoelectric layer. In this work, we analyze for the first time the nonlinear behavior of AlN material particularly for coupled BAW resonators. To characterize the nonlinear effects in CRFs, we measure the 1-dB gain compression point (P1dB) and the intercept point (IP(3)). Then, we develop a nonlinear model of CRFs using harmonic balance (HB) simulation in commercially available software. The HB environment allows fitting simulations to measurements in terms of P(1dB) and IP(3). We find that a high RF power induces nonlinear changes in the material constants' real parts: elastic stiffness c(33) (4.9%), piezoelectric e(33) (17.4%), and permittivity ?(33) (5.2%). These nonlinear variations of material constants describe the nonlinear behavior of CRF devices using the same deposit process for AlN material.     

Scanning near-field optical microscopy as a tool for the characterization of multimode interference devices

We report the scanning near-field optical microscopy (SNOM) characterization of a 4 x 4 multimode interference (MMI) device working at a wavelength of 1.55 microm and designed for astronomical signal recombination. A comprehensive analysis of the mapped propagating field is presented. We compare SNOM measurements with beam-propagation-method simulations and thus are able to determine the MMI structure's refractive-index contrast and show that the measured value is higher than the expected value. Further investigation allows us to demonstrate that good care must be taken with the refractive-index profile used in simulation when one deals with low-index contrast structures. We show evidence that a step-index contrast is not suitable for adequate simulation of our structure and present a model that permits good agreement between measured and simulated propagating fields.