Analysis of Combined Systems of Two Endoreversible Engines

A single endoreversible engine can operate as a cooler, a true heat engine, a heat pump, or a refrigerator. We investigate how many different modes of operation a combined system of two endoreversible engines may display. Special attention is paid to the independent combined system which neither consumes nor supplies power.     

A method for dynamic measurement of the resistance to dry heat exchange by footwear

Five different types of cold protective footwear have been tested with regard to their resistance to dry heat loss (i.e. the insulation) with a new electrically heated foot model. The model is able to simulate 'walking' movements in order to provide a more realistic simulation of wear conditions. Thermal insulation of shoes with and without a steel toe cap was the same. The insulating properties during simulated walking movements were 10-25% lower compared with static conditions. For two of the shoe models a significantly lower insulation value for the sole area was obtained when adding a weight of 30 kg. A significant difference could also be found between the insulation values of two different sizes of one of the models. Measurements with the standard method (EN 344) correlated well with the local insulation value of the sole part of the thermal foot. Correlation with the insulation value for the whole shoe was much less, variation was bigger and ranking in terms of cold protection differed between methods. The electrically heated foot model appears to provide a reproducible, accurate and more realistic method for measuring the insulation properties of shoes than EN 344.     

Prediction of fire classification for wood based products. A multivariate statistical approach based on the cone calorimeter

Wood has long traditions as a building material, and is often used in construction elements, and as interior and exterior surfaces in the Nordic countries. In most applications, there are reaction to fire requirements to products used as surfaces, e.g. in escape routes and larger public spaces. Most wood products will therefore have to be treated with fire retardant (FR) agents to fulfil the strict requirements to properties connected to heat release and flame spread. Unfortunately, FR agents usually also increase the smoke production, as they cause a more incomplete combustion of the wood. The wood product manufacturers seek to find the optimal amount of FR additives where both heat release and smoke production in the classifying test are within the requirements given in the building regulations. This paper describes models for prediction of the European reaction to fire classes of wood products. The models are based on multivariate statistical analysis, and use test results from the cone calorimeter test as input. The presented models are, with very good precision, able to predict which Euroclass and additional smoke class a wood based product would obtain if it were to be tested in the single burning item test. Copyright © 2006 John Wiley & Sons, Ltd.     

Differential kinetics and distribution of antibodies in serum and nasal and vaginal secretions after nasal and oral vaccination of humans

Although nasal vaccination has emerged as an interesting alternative to systemic or oral vaccination, knowledge is scarce about the immune responses after such immunization in humans. In the present study, we have compared the kinetics and organ distribution of the antibody responses after nasal and oral vaccination. We immunized female volunteers nasally or orally with cholera toxin B subunit (CTB) and determined the specific antibody levels in serum and nasal and vaginal secretions, as well as the number of circulating antibody-secreting cells, before immunization and 1, 2, 3, 6, and 26 weeks thereafter. Nasal vaccination induced 9-fold CTB-specific immunoglobulin A (IgA) and 56-fold specific IgG antibody increases in nasal secretions, whereas no significant IgA increase was seen after oral vaccination. Both oral and nasal vaccination resulted in 5- to 6-fold CTB-specific IgA and 20- to 30-fold specific IgG increases in vaginal secretions. Strong serum responses to CTB were also induced by both routes of vaccination. A notable difference between nasal and oral vaccination was that the nasal route elicited a specific antibody response with a later onset but of much longer duration than did the oral route. We conclude from this study that the nasal route is superior to the oral route for administering at least nonliving vaccines against infections in the upper respiratory tract, whereas either oral or nasal vaccination might be used for eliciting antibody responses in the female genital tract.     

Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Silencing DTX3L Inhibits the Progression of Cervical Carcinoma by Regulating PI3K/AKT/mTOR Signaling Pathway

Cervical carcinoma (CC) is the second most prevalent gynecologic cancer in females across the world. To obtain a better understanding of the mechanisms underlying the development of CC, high-resolution label-free mass spectrometry was performed on CC and adjacent normal tissues from eight patients. A total of 2631 proteins were identified, and 46 significant differently expressed proteins (DEPs) were found between CC and normal tissues (p < 0.01, fold change >10 or <0.1). Ingenuity pathway analysis revealed that the majority of the proteins were involved in the regulation of eIF4 and p70S6K signaling and mTOR signaling. Among 46 DEPs, Integrinβ6 (ITGB6), PPP1CB, TMPO, PTGES3 (P23) and DTX3L were significantly upregulated, while Desmin (DES) was significantly downregulated in CC tissues compared with the adjacent normal tissues. In in vivo and in vitro experiments, DTX3L knockdown suppressed CC cell proliferation, migration, invasion and xenograft tumorigenesis, and enhanced cell apoptosis. Combination of silencing DTX3L and cisplatin treatment induced higher apoptosis percentage compared to cisplatin treatment alone. Moreover, DTX3L silencing inhibited the PI3K/AKT/mTOR signal pathway. Thus, our results suggested DTX3L could regulate CC progression through the PI3K/AKT/mTOR signal pathway and is potentially a novel biomarker and therapeutic target for CC.     

Kinetic modeling of hemicellulose hydrolysis in the presence of homogeneous and heterogeneous catalysts

Kinetic models were developed for the hydrolysis of O‐acetyl‐galactoglucomannan (GGM), a hemicellulose appearing in coniferous trees. Homogeneous and heterogeneous acid catalysts hydrolyze GGM at about 90°C to the monomeric sugars galactose, glucose, and mannose. In the presence of homogeneous catalysts, such as HCl, H₂SO₄, oxalic acid, and trifluoroacetic acid, the hydrolysis process shows a regular kinetic behavior, while a prominent autocatalytic effect was observed in the presence of heterogeneous cation‐exchange catalysts, Amberlyst 15 and Smopex 101. The kinetic models proposed were based on the reactivities of the nonhydrolyzed sugar units and the increase of the rate constant (for heterogeneous catalysts) as the reaction progresses and the degree of polymerization decreases. General kinetic models were derived and special cases of them were considered in detail, by deriving analytical solutions for product distributions. The kinetic parameters, describing the autocatalytic effect were determined by nonlinear regression analysis. The kinetic model described very well the overall kinetics, as well as the product distribution in the hydrolysis of water soluble GGM by homogeneous and heterogeneous catalysts. The modelling principles developed in the work can be in principle applied to hydrolysis of similar hemicelluloses as well as starch and cellulose. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1066–1077, 2014     

Prediction of chromatographic retention and protein identification in liquid chromatography/mass spectrometry

Liquid chromatography coupled on- or off-line with mass spectrometry is rapidly advancing as a tool in proteomics capable of dealing with the inherent complexity in biology and complementing conventional approaches based on two-dimensional gel electrophoresis. Proteins can be identified by proteolytic digestion and peptide mass fingerprinting or by searching databases using short-sequence tags generated by tandem mass spectrometry. This paper shows that information on the chromatographic behavior of peptides can assist protein identification by peptide mass fingerprinting in liquid chromatography/mass spectrometry. This additional information is significant and already available at no extra experimental cost.     

Lipophilic Extractives in Populus × euramericana “Guariento” Stemwood and Bark

Abstract

The lipophilic extractives in stemwood and bark from three different heights of Populus × euramericana “Guariento” were analyzed. The bark samples, especially from 4 and 8 meters height, contained much more extractives than the stemwood samples. The lipophilic extractives identified by Gas Chromatography–Mass Spectroscopy (GC-MS) were composed of five component groups (i.e. triglycerides, steryl esters, free fatty acids, sterols, and free fatty alcohols both in the stemwood and bark). Besides ferulic acid esters, α-amyrin and its esters, 4-hydroxycinnamic acid esters of fatty alcohols were also identified in the stemwood and bark. Small amounts of alkanes and oligomeric or polymeric material with higher molar mass than triglycerides were present only in the bark. Glycerides, mainly triglycerides, were the largest component group of the lipophilic extractives. The high proportion of short-chain fatty acids released after alkaline hydrolysis are beneficial when removing pitch particles or fatty acid soaps by dispersing and washing during pulping and papermaking.