A critical heat flux model based on mass, energy, and momentum balance for upflow boiling at low qualities

A mechanistic modeling of critical heat flux (CHF) in upflow boiling at low qualities is performed. The developed model is based on a physical criterion of CHF occurrence and a mechanism limiting the thermal transport between a stagnant bubbly layer and bulk stream. The mechanism can be mathematically formulated by coupling the equation of limiting mixing mass flux, which is derived from momentum balance equations in two regions, with local mass and energy balance equations on the bubbly layer. The resulting form of the model is represented by a general and straightforward CHF formula involving two empirical constants related to the void fraction and the thickness of the bubbly layer. The predictions agree well with the extensive CHF data of water in uniformly heated tubes.     

茂名石化PE农用薄膜专用料的生产和开发

概述了我国农用薄膜现状与发展趋势，分析了存在的问题，对茂名石油化工公司的聚乙烯农用薄膜专用树脂的生产和开发提出了建议。     

Development of a thermal hydraulic analysis code for gas-cooled reactors with annular fuels

Gas-cooled reactors have been highlighted as a promising option for next generation reactor technology. A thermal hydraulic analysis code for gas-cooled reactors has been developed with a heat transfer model of a block element, which is solved implicitly with the helium energy equation. Validation was carried out through comparison with both experimental and analytical results. A computation module for annular fuel rods has been coupled to the code for comparative analyses of an annular fuel-based block element. At normal operation, the annular fuel shows 80 °C lower peak temperature than the solid fuel for the same power in Japan's high temperature engineering test reactor (HTTR), even though the pressure drop is higher in the annular fuel.     

Classification and prediction of the critical heat flux using fuzzy theory and artificial neural networks

A new method to predict the critical heat flux (CHF) is proposed, based on the fuzzy clustering and artificial neural network. The fuzzy clustering classifies the experimental CHF data into a few data clusters (data groups) according to the data characteristics. After classification of the experimental data, the characteristics of the resulting clusters are discussed with emphasis on the distribution of the experimental conditions and physical mechanism. The CHF data in each group are trained in an artificial neural network to predict the CHF. The artificial neural network adjusts the weight so as to minimize the prediction error within the corresponding cluster. Application of the proposed method to the KAIST CHF data bank shows good prediction capability of the CHF, better than other existing methods.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

A self-organizing fuzzy control of weld pool size in GMA welding processes

In arc welding processes, because of the complexity and nonlinearity of heat transfer phenomena, it is often difficult to design an effective control system based upon an exact mathematical model. In this paper, a self-organizing fuzzy control method is proposed to obtain a uniform weld quality by regulation of the surface temperature at a desired level. The proposed control system is designed to comprise a combined structure of the fuzzy SOC with conventional PD control for improving the system's stability. The control experiments show that the proposed controller guarantees a uniform weld quality for various welding conditions.     

本钢烧结矿冷却及其余热回收的试验研究

从烧结矿冷却并回收其余热的角度出发，介绍了利用烧结机尾落矿空间，采用喷吹空气装置对烧结矿进行冷却的小型模拟试验，从测出的结果来看，有可能成为一种新的烧结矿冷却方式。     

Melt filtration of recycled PVC

The separation of PVC from contaminants is one of the most important steps in recycling PVC. Earlier works have shown that one can separate PVC from other polymers by using the X-ray fluorescence technique. However, in many cases, even after careful separation, there is a remaining impurity level of about 0.1% due to the limitations of the separation processes. In many applications, impurities, particularly nonmeltables, cause defects in the PVC matrix and must be removed for best performance and appearance. Melt filtration appears to be the best technique to remove the nonmeltable impurities.     

Outcome of transplantation for standard-risk leukaemia with grafts depleted of lymphocytes after conditioning with an intensified regimen

One hundred and eighty-one consecutive patients with standard-risk leukaemia were transplanted with HLA-identical sibling grafts depleted of lymphocytes using counter-flow centrifugation. In 116 patients, standard conditioning was intensified by the addition of anthracyclines. Multivariate analysis revealed significantly more acute GVHD > or = grade 2 and a trend towards more chronic GVHD in patients conditioned with the addition of anthracyclines. For all patients the risk for chronic GVHD, but not for acute GVHD increased with a higher number of T cells in the graft. The projected 5-year probability of relapse was significantly lower in the group of patients conditioned with anthracyclines; 26% versus 52% (P = 0.015). In multivariate analysis the addition of anthracyclines to the conditioning regimen was the only significant factor contributing to a lower probability of relapse. The projected 5-year probability of leukaemia-free survival [LFS] in the patients conditioned with and without the addition of anthracyclines was 56% and 36%, respectively (P = 0.004). In multivariate analysis the addition of anthracyclines to the conditioning regimen correlated significantly with a lower number of mixed chimaeras in patients at 6 and 12 months after BMT. Mixed chimaerism at 6 months after transplantation did not significantly correlate with a higher incidence of relapse in further follow-up. In contrast, mixed chimaerism at 12 months after BMT was significantly associated with higher relapse rate. We conclude that the addition of anthracyclines to the conditioning regimen improves outcome of BMT using T-cell-depleted grafts.     

Synthesis and characterization of novel aromatic condensation polymers containing rigid benzoxazole pendent groups

A new aromatic diamine monomer containing benzoxazole substituents was prepared by a multistep synthesis starting from 1,4‐dibromo‐2,5‐difluorobenzene. The diamine was polymerized with commercial aromatic dianhydride or dicarboxylic acid chloride monomers to provide several different poly(amic acid)s and polyamides with their inherent viscosities in the range of 0.24–0.46 dL/g. Thermal properties of these polymers including thermal imidization of poly(amic acid)s into polyimides were investigated by using FTIR, DSC, and TGA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 178–185, 2004