Optically pumped rubidium as a frequency standard at 196 THz

The performance of 196.0-THz (1529-nm) DFB lasers frequency-locked to absorption lines of a rubidium vapor optically pumped at 384.2 THz (780.2 nm) is studied. The absorption profiles of the pumped vapor are measured under various conditions and compared with theoretical predictions. A bright resonance resulting from the cascade of two cycling transitions is characterized both experimentally and theoretically. The measured frequency stability of a DFB laser frequency-locked to this line reaches a level of 2×10^-10 for an averaging time of 100 s when compared to a similar laser locked to an acetylene line     

Priority organic pollutants in the urban water cycle (Toulouse, France)

Application of the European Water Framework Directive requires Member States to have better understanding of the quality of surface waters in order to improve knowledge of priority pollutants. Xenobiotics in urban receiving waters are an emerging concern. This study proposes a screening campaign of nine molecular species of xenobiotics in a separated sewer system. Five sites were investigated over one year in Toulouse (France) using quantitative monitoring. For each sample, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, nonylphenols, diethelhexylphthalate, linear alkylbenzene sulphonates, methyl tert-butylether, total hydrocarbons, estradiol and ethinylestradiol were analysed. Ground, rain and roof collected water concentrations are similar to treated wastewater levels. Run-off water was the most polluted of the five types investigated, discharged into the aquatic environment. The wastewater treatment plant reduced xenobiotic concentrations by 66% before discharge into the environment. Regarding environmental quality standards, observed concentrations in waters were in compliance with standards. The results show that xenobiotic concentrations are variable over time and space in all urban water compartments.     

Using a Visual Attention Model to Improve Gaze Tracking Systems in Interactive 3D Applications

This paper introduces the use of a visual attention model to improve the accuracy of gaze tracking systems. Visual attention models simulate the selective attention part of the human visual system. For instance, in a bottom‐up approach, a saliency map is defined for the image and gives an attention weight to every pixel of the image as a function of its colour, edge or intensity. Our algorithm uses an uncertainty window, defined by the gaze tracker accuracy, and located around the gaze point given by the tracker. Then, using a visual attention model, it searches for the most salient points, or objects, located inside this uncertainty window, and determines a novel, and hopefully, better gaze point. This combination of a gaze tracker together with a visual attention model is considered as the main contribution of the paper. We demonstrate the promising results of our method by presenting two experiments conducted in two different contexts: (1) a free exploration of a visually rich 3D virtual environment without a specific task, and (2) a video game based on gaze tracking involving a selection task. Our approach can be used to improve real‐time gaze tracking systems in many interactive 3D applications such as video games or virtual reality applications. The use of a visual attention model can be adapted to any gaze tracker and the visual attention model can also be adapted to the application in which it is used.     

Effect of Fe on Microstructure and Properties of 8xxx Aluminum Conductor Alloys

The effect of Fe contents (0.3-0.7 wt.%) on the microstructure, electrical conductivity, mechanical and creep properties of 8xxx aluminum conductor alloys was investigated. Results revealed that the as-cast microstructure of 8xxx alloys was consisted of equiaxed α-Al grains and secondary Fe-rich intermetallics distributed in the interdendritic region. The extruded microstructure showed partially recrystallized structure for 0.3% Fe alloy but only dynamically recovered structures for 0.5 and 0.7% Fe alloys. With increasing Fe contents, the ultimate tensile strength and yield strength were remarkably improved, while the electrical conductivity was slightly decreased. Moreover, the creep resistance was greatly improved, which is attributed to the larger volume fraction of fine intermetallic particles and smaller subgrain size in the higher Fe-containing alloys. The creep threshold stress was found to increase from 24.6 to 33.9 MPa with increasing Fe contents from 0.3 to 0.7%, respectively. The true stress exponent values were close to 3 for all three experimental alloys, indicating that the creep mechanism of 8xxx alloys was controlled by dislocation glide.     

Structural Consequences of the 1,2,3-Triazole as an Amide Bioisostere in Analogues of the Cystic Fibrosis Drugs VX-809 and VX-770

Although the 1,2,3-triazole is a commonly used amide bioisostere in medicinal chemistry, the structural implications of this replacement have not been fully studied. Employing X-ray crystallography and computational studies, we report the spatial and electronic consequences of replacing an amide with the triazole in analogues of cystic fibrosis drugs in the VX-770 and VX-809 series. Crystallographic analyses quantify subtle differences in the relative positions and conformational preferences of the R¹ and R² substituents attached to the amide and triazole bioisosteres. Computational studies derived from the X-ray data highlight the improved hydrogen bonding donor and acceptor capabilities of the amide in comparison to the triazole. This analysis of the spatial and electronic differences between the amide and 1,2,3-triazole will inform medicinal chemists as they consider using the triazole as an amide bioisostere.     

Facial animation retargeting and control based on a human appearance space

Expressive facial animations are essential to enhance the realism and the credibility of virtual characters. Parameter‐based animation methods offer a precise control over facial configurations while performance‐based animation benefits from the naturalness of captured human motion. In this paper, we propose an animation system that gathers the advantages of both approaches. By analyzing a database of facial motion, we create the human appearance space. The appearance space provides a coherent and continuous parameterization of human facial movements, while encapsulating the coherence of real facial deformations. We present a method to optimally construct an analogous appearance face for a synthetic character. The link between both appearance spaces makes it possible to retarget facial animation on a synthetic face from a video source. Moreover, the topological characteristics of the appearance space allow us to detect the principal variation patterns of a face and automatically reorganize them on a low‐dimensional control space. The control space acts as an interactive user‐interface to manipulate the facial expressions of any synthetic face. This interface makes it simple and intuitive to generate still facial configurations for keyframe animation, as well as complete temporal sequences of facial movements. The resulting animations combine the flexibility of a parameter‐based system and the realism of real human motion. Copyright © 2010 John Wiley & Sons, Ltd.     

Estimation of the distribution of the maximum theoretical intake for ten additives in France.

Three European directives imply for all member states an evaluation of food additives intakes. This paper describes the French approach, using a step-by-step procedure to evaluate, at a national level, the consumption of 10 food additives or groups of additives (E100, curcumin; E160b, annatto; E200-203, sorbic acid and salts; E210-213, benzoic acid and salts; E220-224, 226-228, sulphites; E249-250, nitrites; E297, fumaric acid; E473-474, sucrose esters and sucroglycerides; E491-492, stearoyl lactates; E952, cyclamic acid). The results are reassuring for the general population, except for sulphites.