Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

High‐intensity sweeteners in espresso coffee: ideal and equivalent sweetness and time–intensity analysis

The efficient substitution of sucrose by a sweetener in beverages requires the application of some sensory techniques. First, one must determine the concentrations of the sweeteners under study, equivalent in sweetness to the ideal sucrose concentration. In addition, it is fundamental to determine which is most similar to sucrose. The objectives of this study were to determine the ideal sweetness for espresso coffee and the equivalent concentrations in sweetness of different sweeteners, as well as characterise the time–intensity profile of each sweetener in relation to sweetness. The sweeteners evaluated were sucralose, aspartame, neotame, a cyclamate/saccharin mixture (2:1) and stevia. The sucrose concentration considered ideal by consumers was 12.5% (w/v), and the equivalent concentrations of the sweeteners were 0.0159% for sucralose, 0.0549% for aspartame, 0.0016% for neotame, 0.0359% for the cyclamate/saccharin mixture and 0.0998% for stevia. The time–intensity analysis indicated that possibly the sweeteners neotame, aspartame and sucralose would be the best substitutes for sucrose.     

Consumption of solutions containing sodium chloride is enhanced in female oxytocin-deficient mice.

Intact and ovariectomized oxytocin (OT)-deficient (OT-/-) and wild-type (OT+/+) mice were tested for consumption of 0.5 M NaCl solution or tap water in a 2-bottle choice test. During 3 days of acclimation, voluntary ingestion of NaCl was equal between genotypes. After overnight fluid deprivation, intact OT-/- mice ingested 2 times more NaCl solution than OT+/+ mice in the 6th hr, but not the 1 st hr, after reintroduction of fluid. Ovariectomized mice consumed less than intact mice after overnight fluid deprivation. When a 0.2 M NaCl solution was administered for 6 days in ovariectomized mice, OT-/- mice voluntarily consumed greater amounts than OT+/+ mice. After overnight fluid deprivation, consumption by OT-/- mice was 3 times that of OT+/+ mice at 1 hr and 2-fold greater after 6 hr. Enhanced intake of NaCl-containing solutions in female OT-/- mice suggests that central OT may be an important inhibitor of sodium consumption. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Local function approximation in evolutionary algorithms for the optimization of costly functions

We develop an approach for the optimization of continuous costly functions that uses a space-filling experimental design and local function approximation to reduce the number of function evaluations in an evolutionary algorithm. Our approach is to estimate the objective function value of an offspring by fitting a function approximation model over the k nearest previously evaluated points, where k=(d+1)(d+2)/2 and d is the dimension of the problem. The estimated function values are used to screen offspring to identify the most promising ones for function evaluation. To fit function approximation models, a symmetric Latin hypercube design (SLHD) is used to determine initial points for function evaluation. We compared the performance of an evolution strategy (ES) with local quadratic approximation, an ES with local cubic radial basis function (RBF) interpolation, an ES whose initial parent population comes from an SLHD, and a conventional ES. These algorithms were applied to a twelve-dimensional (12-D) groundwater bioremediation problem involving a complex nonlinear finite-element simulation model. The performances of these algorithms were also compared on the Dixon-Szego test functions and on the ten-dimensional (10-D) Rastrigin and Ackley test functions. All comparisons involve analysis of variance (ANOVA) and the computation of simultaneous confidence intervals. The results indicate that ES algorithms with local approximation were significantly better than conventional ES algorithms and ES algorithms initialized by SLHDs on all Dixon-Szego test functions except for Goldstein-Price. However, for the more difficult 10-D and 12-D functions, only the cubic RBF approach was successful in improving the performance of an ES. Moreover, the results also suggest that the cubic RBF approach is superior to the quadratic approximation approach on all test functions and the difference in performance is statistically significant for all test functions with dimension d/spl ges/4.     

Regional characteristics and the decision to innovate in a developing country: A multilevel analysis of Ecuadorian firms

This is the first study that uses multilevel modelling to analyse regional influence on the decision to invest in innovation activities of firms in a single developing country, Ecuador. Our results indicate that the decision to invest in R&D and in other innovation activities are conditioned by the region in which the firm is located. Regional loan volume, orientation towards knowledge exploitation and intra-regional-sectorial R&D spillovers are positively associated with both types of innovation activities, while regional levels of co-operation and inter-regional R&D spillovers are only positively associated with the probability of investing in other innovation activities.     

The effect of co-encapsulation of Lactobacillus rhamnosus GG ATCC 53103 with inulin on alginate/chitosan matrix: the viability in fermented soy blend and simulated digestive system

This research verified the ability of Lactobacillus rhamnosus encapsulated with inulin to tolerate the simulated digestive system and their viability in a soy blend. Probiotic encapsulated in alginate-chitosan matrix without inulin presented a better encapsulation efficiency (80.92%) than encapsulation with inulin (57.39%). On the 28th day, the count of probiotics decreased by 3.42 and 1.99 logarithmic cycles of free and encapsulated cells without inulin, respectively. In contrast, the microorganisms encapsulated with inulin showed an increase of 1.26 logs CFU g⁻¹. During gastrointestinal simulation, cell counts decreased by 0.78, 1.55 and 1.95 CFU g⁻¹ logs for encapsulated cells without inulin, free and encapsulated with inulin, respectively. Sensory panellists liked the fermented soy blend with encapsulated lactobacilli, and this result shows the possibility to create new probiotic foods of plant origin. Therefore, the alginate/chitosan matrix can be considered adequate for the encapsulation of L. rhamnosus. The inulin reduces the encapsulation efficiency and increases the cell loss in gastrointestinal simulation. Considering cellular losses, the best option for preparing a fermented soy blend is to use L. rhamnosus encapsulated without inulin.     

Biochemical characterisation and application of lipases produced by Aspergillus sp. on solid‐state fermentation using three substrates

Lipase from Aspergillus sp. obtained by solid‐state fermentation (SSF) on wheat bran (LWB), soybean bran (LSB) and soybean bran combined with sugarcane bagasse (LSBBC) were 67.5, 58 and 57.3 U of crude lipase per gram substrate, respectively. The optimum pH of activity and stability of the LWB was between 8 and 9, and the optimum temperature of activity and stability was 50 °C and up to 60 °C, respectively. The LSB and LSBBC showed two peaks of optimum pH (4 and 6) and optimal values of temperature and stability at 50 °C. The LSB was stable in the pH range of 6–7, while LSBBC in the range of pH 4–7. All the enzymes show activities on p‐nitrophenyl esters (butyrate, laurate and palmitate). LWB stood out either on the hydrolysis of sunflower oil, presenting 66.1% of the activity over commercial lipase and on the esterification of oleic acid and ethanol, surpassing the activities of the commercial lipases studied. The thin layer chromatography showed that LWB and LSB have produced ethyl esters from corn oil, while LWB produced it from sunflower oil.     

Production of fungal lipases using wheat bran and soybean bran and incorporation of sugarcane bagasse as a co-substrate in solid-state fermentation

Fungal strains were screened for lipase producing activities and 10 strains were classified as good producers. Aspergillus sp., Fusarium sp., and Penicillium sp. exhibited the highest activities when fermented in wheat bran (WB) and soybean bran (SB). No fungal growth was observed using sugarcane bagasse (CB). An experimental design was applied to incorporate CB into the fermentation process for lipase production by Aspergillus sp. and Penicillium sp., and to evaluate the best moisture content for the substrate. Strains studied achieved maximum lipase activities with 25% CB combined with 75% WB or SB at 40% moisture content. The highest lipase activities were observed for WB and SB, and for SB combined with CB using Aspergillus sp. Fermentation of 96 h was the optimum period for enzyme production.