Production of hydrogen over bimetallic Pt–Ni/δ-Al2O3: I. Indirect partial oxidation of propane

Indirect partial oxidation (IPOX) of propane was studied over bimetallic 0.2 wt.% Pt–15 wt.% Ni/δ-Al₂O₃ catalyst in the 623–743 K temperature range. The unreduced and reduced forms of the catalyst were characterized by ESEM–EDAX and X-ray diffraction (XRD). In the IPOX tests, the effects of steam to carbon ratio (S/C), carbon to oxygen ratio (C/O₂) and residence time (W/F (g_cat h/mol HC)) on the hydrogen production activity, selectivity and product distribution were studied in detail. The effect of temperature program applied (increasing from 623 to 743 K, ITP; decreasing from 743 to 623 K, DTP) during reaction was also tested. The results showed that the Pt–Ni bimetallic system has superior performance characteristics compared to the monometallic catalysts reported in literature. The reason is thought to be the utilization of the catalyst particles as micro heat exchangers during IPOX; the heat generated by Pt sites during exothermic total oxidation (TOX) being readily transferred through the catalyst particles acting as micro heat exchangers to the Ni sites, which promote endothermic steam reforming (SR). The optimal conditions were found as S/C = 3, C/O₂ = 2.70 and W/F = 0.51 g_cat h/mol HC for IPOX of propane on the basis of high hydrogen productivity and selectivity between 623 and 748 K for the experimental conditions tested. The thermo-neutral points obtained showed the sustainability of reaction in terms of energy.     

Evaluation of a two-temperature control structure for a two-reactant/two-product type of reactive distillation column

Several different control structures have been proposed for reactive distillation columns. The appropriate control structure depends on the flowsheet and on the type of reactions occurring in the column. If two reactants are involved and if it is desirable to operate the process without any excess of reactant, it is necessary to manage the fresh feed streams so that the stoichiometry is exactly balanced. A composition analyzer that measures an internal composition in the column is often required. However, if two products are produced, it is possible to avoid the use of an analyzer by using two temperatures in the column to adjust the two feed streams. This type of structure was proposed by Roat et al. [Roat, S., Downs. J., Vogel, E., Doss, J., 1986. Integration of rigorous dynamic modeling and control system synthesis for distillation columns. In: Chemical Process Control—CPC III. Elsevier, Amsterdam.] for the ideal reaction A+B↔C+D in one of the earliest papers dealing with reactive distillation control.The purpose of this paper is to explore the effectiveness of this two-temperature control structure for various column designs (number of reactive stages) to quantify the impact of design on controllability. We also discuss the issues of the selection of the trays whose temperatures are to be controlled and the tuning of the two interacting temperature controllers. Disturbances in production rate and fresh feed compositions are made to examine the rangeability of this control structure. Both an ideal reaction system and the methyl acetate system are studied. One of the main conclusions is that the locations of the temperature control trays should be made such that the two temperature controllers both have direct action (an increase in temperature increases feed), which requires negative openloop process gains for both loops.     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

On the qualitative behaviors of solutions of third order nonlinear differential equations

We present some new results about oscillation and asymptotic behavior of solutions of third order nonlinear differential equations of the form

(r₂(t)(r₁(t)y^′)^′)^′+p(t)y^′+q(t)f(y(g(t)))=0.     

Extending the information delivery manual approach to identify information requirements for performance analysis of HVAC systems

Heating, Ventilation and Air-Conditioning (HVAC) systems account for more than 15% of the total energy consumption in the US. In order to improve the energy efficiency of HVAC systems, researchers have developed hundreds of algorithms to automatically analyze their performance. However, the complex information, such as configurations of HVAC systems, layouts and materials of building elements and dynamic data from the control systems, required by these algorithms inhibits the process of deploying them in real-world facilities. To address this challenge, we envision a framework that automatically integrates the required information items and provides them to the performance analysis algorithms for HVAC systems. This paper presents an approach to identify and document the information requirements from the publications that describe these algorithms. We extend the Information Delivery Manual (IDM) approach so that the identified information requirements can be mapped to multiple information sources that use various formats and schemas. This paper presents the extensions to the IDM approach and the results of using it to identify information requirements for performance analysis algorithms of HVAC systems.     

The electrical and dielectric characterization of the Co/ZnO-Rods/p-Si heterostructure depending on the frequency

Journal of Materials Science: Materials in Electronics - Zinc oxide (ZnO) rods film was fabricated by homemade and simple spray pyrolysis technique on a p-type silicon (Si) substrate, and the film...     

Different approaches to synthesize carnosine selective imprinted polymers

Selective recognition of proteins by synthetic molecularly imprinted polymers is one of the interesting topics in biosciences. Carnosine (β-alanyl-l-histidine) and related histidine containing peptides are distributed in a wide range of tissues in vertebrate organisms. These peptides have been extensively studied because of their important physiological properties besides their metal chelation property. In this study, preparation of carnosine specific imprinted polymers (MIPs) for the recognition of imidazole containing peptides with and without copper ion is reported. Carnosine and copper–carnosine complex were employed as template molecules where 4-vinylpyridine and ethylenglycol dimethacrylate were chosen as monomer and crosslinker, respectively. The selectivity and binding studies of copper–carnosine imprinted polymer showed high selectivity toward both carnosine (template peptide) and the cupric ion. The selectivity of copper–carnosine imprinted polymer was 65% and carnosine imprinted polymer was approximately 40%. These results indicate that specific recognition of carnosine is depending on the basis of metal coordination     

Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride

Effect of potassium carbonate addition on the carbothermic formation of hexagonal boron nitride (hBN) was investigated by keeping the K₂CO₃ added B₂O₃+C mixtures in nitrogen atmosphere at 1400 °C for 40–160 min. K₂CO₃ amount was varied in the range of 10–60 wt% of the B₂O₃+C mixture. Products were subjected to XRD and quantitative analyses, SEM and TEM observations, and particle size measurement. Amount of hBN increased considerably with K₂CO₃ addition; also particle size and crystallinity improved. Catalytic role of K₂CO₃ was suggested as forming a potassium borate melt in which hBN particles form, in addition to carbothermic formation reaction. Effect of K₂CO₃ on increasing the hBN amount decreased when it was used over 40%. This was attributed to the rapid evaporation of the formed potassium borate liquid.