Experimental set-up for time resolved small angle X-ray scattering studies of nanoparticles formation using a free-jet micromixer

Recently, we have designed, fabricated and tested a free-jet micromixer for time resolved small angle X-ray scattering (SAXS) studies of nanoparticles formation in the <100 μs time range. The microjet has a diameter of 25 μm and a time of first accessible measurement of 75 μs has been obtained. This result can still be improved. In this communication, we present a method to estimate whether a given chemical or biological reaction can be investigated with the micromixer, and to optimize the beam size for the measurement at the chosen SAXS beamline. Moreover, we describe a system based on stereoscopic imaging which allows the alignment of the jet with the X-ray beam with a precision of 20 μm. The proposed experimental procedures have been successfully employed to observe the formation of calcium carbonate (CaCO₃) nanoparticles from the reaction of sodium carbonate (Na₂CO₃) and calcium chloride (CaCl₂). The induction time has been estimated in the order of 200 μs and the determined radius of the particles is about 14 nm.     

Infrared microspectroscopy of live cells in microfluidic devices (MD-IRMS): toward a powerful label-free cell-based assay

Until nowadays most infrared microspectroscopy (IRMS) experiments on biological specimens (i.e., tissues or cells) have been routinely carried out on fixed or dried samples in order to circumvent water absorption problems. In this paper, we demonstrate the possibility to widen the range of in-vitro IRMS experiments to vibrational analysis of live cellular samples, thanks to the development of novel biocompatible IR-visible transparent microfluidic devices (MD). In order to highlight the biological relevance of IRMS in MD (MD-IRMS), we performed a systematic exploration of the biochemical alterations induced by different fixation protocols, ethanol 70% and formaldehyde solution 4%, as well as air-drying on U937 leukemic monocytes by comparing their IR vibrational features with the live U937 counterpart. Both fixation and air-drying procedures affected lipid composition and order as well as protein structure at a different extent while they both induced structural alterations in nucleic acids. Therefore, only IRMS of live cells can provide reliable information on both DNA and RNA structure and on their cellular dynamic. In summary, we show that MD-IRMS of live cells is feasible, reliable, and biologically relevant to be recognized as a label-free cell-based assay.     

Fail-Safe Circuits for Nuclear Protective Systems

The article describes a new set of fail-safe logic blocks particularly suited to safety systems. The input information is normally +5V; in case of alarm, the input drops to 0V. Fundamental blocks (AND, OR, NOT, etc.) are pulse-modulated, so as to achieve 0V output voltage in case of failure. More complex logic function can be synthesized and redundancy can be employed in order to avoid erroneous action.     

A hybrid plasmonic-photonic nanodevice for label-free detection of a few molecules

Noble metal nanowaveguides supporting plasmon polariton modes are able to localize the optical fields at nanometer level for high sensitivity biochemical sensing devices. Here we report on the design and fabrication of a novel photonic-plasmonic device which demonstrates label-free detection capabilities on single inorganic nanoparticles and on monolayers of organic compounds. In any case, we determine the Raman scattering signal enhancement and the device detection limits that reach a number of molecules between 10 and 250. The device can be straightforwardly integrated in a scanning probe apparatus with the possibility to match topographic and label-free spectroscopic information in a wide range of geometries.     

Electrical measurement of cross-sectional position of particles flowing through a microchannel

The first high-throughput system for the electrical detection of cross-sectional position and velocity of individual particles flowing through a rectangular microchannel is presented. Lateral position (along channel width) and vertical position (along channel height) are measured using two different sets of coplanar electrodes. In particular, the ratio of travel times measured with electrodes generating a current flow transverse or oblique with respect to particle trajectory yields lateral position. The relative prominence and transit time of a bipolar double-Gaussian signal obtained with a suited electrode configuration, respectively, supply vertical position and velocity. The operating principle is presented by means of finite element numerical simulations. The method is experimentally validated by comparing the electrical estimates of position and velocity of polystyrene beads with optical estimates obtained by processing high-speed images. The system is used to observe bead focusing at different particle Reynolds numbers. This system, providing a fully electrical characterization of single-particle motion, represents a powerful tool, e.g. to understand fluid motion at the microscale, in particle separation studies, or to assess the performance of particle focusing devices. Moreover, it can be simultaneously used to perform single-cell impedance spectroscopy, thus achieving an unprecedented multiparamteric characterization.     

Site‐Controlled Single‐Photon Emitters Fabricated by Near‐Field Illumination

Many of the most advanced applications of semiconductor quantum dots (QDs) in quantum information technology require a fine control of the QDs' position and confinement potential, which cannot be achieved with conventional growth techniques. Here, a novel and versatile approach for the fabrication of site‐controlled QDs is presented. Hydrogen incorporation in GaAsN results in the formation of N–2H and N–2H–H complexes, which neutralize all the effects of N on GaAs, including the N‐induced large reduction of the bandgap energy. Starting from a fully hydrogenated GaAs/GaAsN:H/GaAs quantum well, the N? H bonds located within the light spot generated by a scanning near‐field optical microscope tip are broken, thus obtaining site‐controlled GaAsN QDs surrounded by a barrier of GaAsN:H (laterally) and GaAs (above and below). By adjusting the laser power density and exposure time, the optical properties of the QDs can be finely controlled and optimized, tuning the quantum confinement energy over more than 100 meV and resulting in the observation of single‐photon emission from both the exciton and biexciton recombinations. This novel fabrication technique reaches a position accuracy <100 nm and it can easily be applied to the realization of more complex nanostructures.     

Controlling the Cassie-to-Wenzel Transition: an Easy Route towards the Realization of Tridimensional Arrays of Biological Objects

Nano-Micro Letters - In this paper we provide evidence that the Cassie-to-Wenzel transition, despite its detrimental effects on the wetting properties of superhydrophobic surfaces, can be exploited...     

Manganese-induced growth of GaAs nanowires

GaAs nanowires have been grown on SiO2 and GaAs by molecular beam epitaxy using manganese as growth catalyst. Transmission electron microscopy shows that the wires have a wurtzite-type lattice and that alpha-Mn particles are found at the free end of the wires. X-ray absorption fine structure measurements reveal the presence of a significant fraction of Mn-As bonds, suggesting Mn diffusion and incorporation during wire growth. Transport measurements indicate that the wires are p-type, as expected from doping of GaAs with Mn.