Effects of the Anti-Tumorigenic Agent AT101 on Human Glioblastoma Cells in the Microenvironmental Glioma Stem Cell Niche

Glioblastoma (GBM) is a barely treatable disease due to its profound chemoresistance. A distinct inter- and intratumoral heterogeneity reflected by specialized microenvironmental niches and different tumor cell subpopulations allows GBMs to evade therapy regimens. Thus, there is an urgent need to develop alternative treatment strategies. A promising candidate for the treatment of GBMs is AT101, the R(-) enantiomer of gossypol. The present study evaluates the effects of AT101, alone or in combination with temozolomide (TMZ), in a microenvironmental glioma stem cell niche model of two GBM cell lines (U251MG and U87MG). AT101 was found to induce strong cytotoxic effects on U251MG and U87MG stem-like cells in comparison to the respective native cells. Moreover, a higher sensitivity against treatment with AT101 was observed upon incubation of native cells with a stem-like cell-conditioned medium. This higher sensitivity was reflected by a specific inhibitory influence on the p-p42/44 signaling pathway. Further, the expression of CXCR7 and the interleukin-6 receptor was significantly regulated upon these stimulatory conditions. Since tumor stem-like cells are known to mediate the development of tumor recurrences and were observed to strongly respond to the AT101 treatment, this might represent a promising approach to prevent the development of GBM recurrences.     

Telephone booster sessions for optimizing smoking cessation for patients in rehabilitation centers.

Smokers with smoking-related diseases who are hospitalized in rehabilitation centers should be offered smoking cessation. This is the first study evaluating whether telephone booster sessions after intensive inpatient treatment are an effective strategy. The present study was conducted in 13 rehabilitation centers for somatic disorders as a prospective multicenter study with a randomized treatment-control group design. We compared abstinence rates after hospital discharge from treatment that included a group smoking cessation program with (treatment group) and without telephone booster sessions (control group). Data from 290 smokers were analyzed. After 6 and 12 months the treatment group achieved abstinence rates twice as high as those of the control group. Men profited more from telephone booster sessions than did women. Results indicated that telephone booster sessions were highly effective (even) after an inherently intensive group program during a hospital stay. Further research should focus on the special needs of women receiving telephone counseling.     

Wide-band symmetrical analog multiplier IC for coherentoptical-fiber receivers operating up to 10 Gb/s

A versatile analog four-quadrant multiplier IC with large bandwidth (DC to 6 GHz and 10 Gb/s) and large dynamic range is presented. It was mainly developed for differential-phase-shift-keying (DPSK) phase demodulator and polarization diversity receivers in coherent optical-fiber transmission systems. The circuit consumes 450 mW and only needs a single power supply of -5 V. The circuit principle used allows exact symmetry with respect to both linear inputs, which reduced multiplication errors. In the intended application, especially, the time jitter and the offset voltage of the output pulse patterns are reduced to negligible values. The IC was realized in a 1.25-μm double-polysilicon bipolar technology     

Presence of pressure ulcer prevention methods used among patients considered at risk versus those considered not at risk

PURPOSE: This study examined pressure ulcer-prevention strategies available for patients considered at risk versus those considered not at risk. DESIGN: The study used a prospective, longitudinal design. SETTING AND SUBJECTS: Six hundred ninety-four patients from units of five acute care hospitals, a rehabilitation facility, and two nurses' home care caseloads participated in the investigation. INSTRUMENTS: Data-collection instruments included the Braden Scale for risk assessment, demographic information, and the Pressure Ulcer-Prevention Strategies tool, which assessed for the presence of 16 pressure ulcer-prevention strategies. METHODS: All patients admitted to a participating unit during a 2-month period were followed up until discharge. Depending on the site, patients were assessed for the presence of pressure ulcer-prevention strategies one to three times per week. RESULTS: Patients in the at-risk group versus those in the not-at-risk group were more likely (p < 0.01) to have the head of the bed in a low position, a pressure-reducing bed surface, pressure ulcer prevention charted, a positioning wedge, incontinence cleanser and ointment, heel protection, a prevention care plan, a trapeze, and a posted turning schedule. The at-risk group had significantly (p < 0.01) more prevention strategies present than did the not-at-risk group. However, the percentage of patients placed on a pressure ulcer-prevention program was low for both groups. CONCLUSIONS: Pressure ulcer prevention was evident for the at-risk group, but at a low rate. Institutions must continue to explore this critical area affecting patient outcomes.     

Semiconductor laser amplifier as optical switching gate

The properties of a semiconductor laser amplifier as optical switching gate are investigated. Particular attention is paid to gain, contrast ratio, and switching time of the device. These properties are studied experimentally and theoretically with respect to the injection current, optical input power, and cavity resonances. The experimental arrangements and the theoretical method are described. As an example of the various applications of semiconductor laser amplifier gates, packet switching experiments with self-routing, employing cascaded switching gates, are reported. In a theoretical analysis the restrictions that the properties of semiconductor laser amplifier gates impose on a larger switching system consisting of many such gates are investigated     

Hopping on Even Ground and Up Stairs with a Single Articulated Leg

This paper presents a method for generating gaits for a one-legged articulated hopping robot. A static optimization procedure produces the initial joint velocities for the flight phase, using the principle of conservation of angular momentum and assuming (nearly) passive flight. Two novel objective functions for this static optimization enable one to choose different gaits by simply changing a few parameters. A dynamic optimization procedure yields a solution for the flight trajectory that minimizes control effort. The stance phase (when the foot is touching the ground) becomes a standard two point boundary value problem, also solved with a dynamic optimization procedure. During the stance phase, the physical joint limitations, ground reaction forces, and the trajectory of the zero-moment point all constrain the solution. After these single-phase optimizations, a complete-cycle optimization procedure, incorporating both flight and stance phases, further reduces the control effort and balances the motion phases. In simulation, the leg hops on even ground and up stairs, exhibiting energy-efficient and intuitively satisfying gaits.     

Multi-Stage Phase-Segregation of Mixed Halide Perovskites under Illumination: A Quantitative Comparison of Experimental Observations and Thermodynamic Models

Photo- and charge-carrier-induced ion migration is a major challenge when utilizing metal halide perovskite semiconductors for optoelectronic applications. For mixed iodide/bromide perovskites, the compositional instability due to light- or electrical bias induced phase-segregation restricts the exploitation of the entire bandgap range. Previous experimental and theoretical work suggests that excited states or charge carriers trigger the process, but the exact mechanism is still under debate. To identify the mechanism and cause of light-induced phase-segregation phenomena, the full compositional range of methylammonium lead bromide/iodide samples are investigated, MAPb(Br_xI_1-x)₃ with x = 0…1, by simultaneous in situ X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy during illumination. The quantitative comparison of composition-dependent in situ XRD and PL shows that at excitation densities of 1 sun, only the initial stage of photo-segregation is rationalized with the previously established thermodynamic models. However, a progression of the phase segregation is observed that is rationalized by considering long-lived accumulative photo-induced material alterations. It is suggested that (additional) photo-induced defects, possibly halide vacancies and interstitials, need to be considered to fully rationalize light-induced phase segregation and anticipate the findings to provide crucial insight for the development of more sophisticated models.     

Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate

In medical technology, implants are used to improve the quality of patients’ lives. The development of materials with adapted properties can further increase the benefit of implants. If implants are only needed temporarily, biodegradable materials are beneficial. In this context, iron-based materials are promising due to their biocompatibility and mechanical properties, but the degradation rate needs to be accelerated. Apart from alloying, the creation of noble phases to cause anodic dissolution of the iron-based matrix is promising. Due to its high electrochemical potential, immiscibility with iron, biocompatibility, and antibacterial properties, silver is suited for the creation of such phases. A suitable technology for processing immiscible material combinations is powder-bed-based procedure like laser beam melting. This procedure offers short exposure times to high temperatures and therefore a limited time for diffusion of alloying elements. As the silver phases remain after the dissolution of the iron matrix, a modification is needed to ensure their degradability. Following this strategy, pure iron with 5 wt% of a degradable silver–calcium–lanthanum alloy is processed via laser beam melting. Investigation of the microstructure yields achievement of the intended microstructure and long-term degradation tests indicates an impact on the degradation, but no increased degradation rate.     

Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites

By increasing the density of interfaces in NiAl–CrMo in situ composites, the mechanical properties can be significantly improved compared to conventionally cast material. The refined microstructure is achieved by manufacturing through electron beam powder bed fusion (PBF-EB). By varying the process parameters, an equiaxed or columnar cell morphology can be obtained, exhibiting a plate-like or an interconnected network of the (Cr,Mo) reinforcement phase which is embedded in a NiAl matrix. The microstructure of the different cell morphologies is investigated in detail using scanning electron microscope, transmission electron microscopy, and atom probe tomography. For both morphologies, the mechanical properties at elevated temperatures are analyzed by compression and creep experiments parallel and perpendicular to the building direction. In comparison to cast NiAl and NiAl–(Cr, Mo), the yield strength of the PBF-EB fabricated specimens is significantly improved at temperatures up to 1,027 °C. While the columnar morphology exhibits the best improved mechanical properties at high temperatures, the equiaxial morphology shows nearly ideal isotropic mechanical behavior, which is a substantial advantage over directionally solidified material.