Surface wave modes of printed circuits on ferrite substrates

Surface waves due to a current source on a grounded ferrite slab are investigated. Electromagnetic fields of the structure are in terms of a continuous plane wave spectrum. The spectrum of each field component is obtained numerically through the exponential-matrix method. The surface waves of the structure are extracted from the continuous spectrum by using the residue theorem and the method of steepest descent. Two types of surface waves are found and their properties are described. The surface wave modes found include dynamic surface wave modes which are closely related to the surface waves of a grounded dielectric slab, and magnetostatic surface wave modes which are related to the solution of Laplace's equation for the magnetic potential     

Use of GafChromic film to diagnose laser generated proton beams

A calibration of three types of GafChromic radiochromic film (HS, MD-55, and HD-810) was carried out on the Crocker Nuclear Laboratory's 76 in. cyclotron at UC Davis over doses ranging from 0.001 to 15 kGy. The film was digitized with a scanning microdensitometer with which it was scanned twice with two different filters to increase the film's effective dynamic range. We demonstrate how this calibrated film can be used to measure the spectrum and total energy of a laser generated proton beam. This technique was applied to an experiment on the 10 J, 100 fs Callisto laser at Lawrence Livermore National Laboratory. The resulting proton spectrum was compared to that obtained by simultaneous measurement of Ti nuclear activation; the two methods give the same proton beam slope temperature and agree in number of protons to within 27%.     

Extending the Similarity‐Attraction Effect: The Effects of When‐Similarity in Computer‐Mediated Communication

The feeling of connectedness experienced in computer‐mediated relationships can be explained by the similarity‐attraction effect (SAE). Though SAE is well established in psychology, the effects of some types of similarity have not yet been explored. In 2 studies, we demonstrate similarity‐attraction based on the timing of activities—“when‐similarity.” We describe a novel experimental paradigm for manifesting when‐similarity while controlling for the activities being performed (what‐similarity). Study 1 (N = 24) shows when‐similarity attraction in the evaluation of connectedness with others. Study 2 (N = 42) identifies an interaction between who‐similarity—similarity in personal backgrounds—and when‐similarity. Both studies show that real‐time computer‐mediated interaction can lead to greater feelings of connectedness between people when there is an opportunity to discover when‐similarity.     

Steel Microstructure Effect on Mechanical Properties and Corrosion Behavior of High Strength Low Carbon Steel

Different thermomechanical treatments were applied to a high strength low carbon steel with a novel chemical composition. As a result, three different microstructures were produced with dissimilar mechanical and corrosion properties. Subsequently, a tempering heat treatment was applied to redistribute the phases in the steel. Microstructure A with 56 pct martensite and 32 pct bainite presented high strength but medium ductility; microstructure C with 95 pct ferrite and 3 pct martensite/austenite resulted in low strength and high ductility, and finally microstructure B with 98 pct bainite and 2 pct martensite/austenite resulted in high strength and ductility. Alternatively the corrosion behavior obtained by polarization curves was characterized in 0.1 M H₂SO₄, 3 M H₂SO₄, 3.5 wt pct NaCl, and NS4 solutions resulting in similar magnitudes, while the corrosion behavior acquired by electrochemical impedance spectroscopy had slightly differences in 3 M H₂SO₄.     

Asthmatic exacerbations and environmental pollen concentration in La Comarca Lagunera (Mexico)

In order to determine the correlation between the concentration of environmental pollen and the frequency of asthmatic exacerbations in La Comarca Lagunera (México), a study in a cohort of a 104 diagnosed patients suffering allergic asthma was carried out monitoring monthly from July '93 to July '95 in order to register the existence of asthmatic exacerbations. Environmental samples were taken weekly during the same period of time through a PST high volume collector (Andersen Samplers Inc). The above mentioned samples were processed under acetolysis technics and the pollen grain count under light microscopy. Linear correlation measures were made between the rates of asthmatic exacerbations and the concentration of pollen grain in m3 of air by means of a statistical computer program SAS. There was a 1469 persons/month follow up ('X 15.5) and the correlation between the rates of asthmatic exacerbations and the concentration of environmental pollen was relevant (r = 0.63, r2 = 0.39, p < 0.01). The correlation increased (r = 0.70, r2 = 0.49 and p < 0.01) when the asthmatic exacerbations associated to infectious disease in the upper respiratory system were restricted. The conclusion reached is that the concentration of environment pollen has influence in the development of asthmatic exacerbations in patients with allergic asthma.     

Lithium fuel cells:: I. Lithium/poly(organophosphazene) membrane anodes in KOH and seawater

The main goal of our research project is to design safe, high energy and power density lithium/water systems. We explored the feasibility of substituting the natural bilayer (formed on the lithium surface when lithium is in contact with water), for a thin polymeric film. By substituting the natural bilayer film we hope to reduce the parasitic reactions occurring at the lithium/water interface, thus yielding an increase in the anodic efficiency. We investigated the effect of placing or casting a thin, (lithium/ion-conducting) polymer layer on the lithium metal surface. This paper is part one in a series of two papers. Paper I presents the results obtained with a lithium/polymer system, where the polymer was a monolayer of a polyphosphazene with 90% trifluoromethylphenoxy and 10% lithium carboxyphenoxy side groups (Polymer 4), or a multilayer film formed of one layer of poly[bis(methoxyethoxyethoxy)phosphazene] (MEEP) and one to three layers of Polymer 4 containing from 0 to 75 wt.% of lithium triflate salts. Paper II presents results obtained when the polymer layers were prepared using a polymer with equal amounts of methoxyethoxyethoxy and phenoxy side groups containing from 0 to 75 wt.% of lithium triflate salts. Phosphazene membranes have been designed and tailored to allow lithium ion conduction and prevent water migration to the surface of lithium metal. The phosphazene membranes enhance the safety of an aqueous lithium cell by inhibiting (or reducing) the reaction of lithium with water that evolves hydrogen at the anode. Original tests of lithium/phosphazene systems led to unpredictable open circuit voltages (OCVs). When the adhesion of the membrane to the lithium metal was improved, the OCV stabilized. The OCVs for the half-cell of lithium polymer aqueous electrolytes varies between −3.1 and −2.8 V_SCE, depending on the membrane. The current densities for this polymer system are in the range of 10⁻⁶-10⁻³ A/cm². The Columbic anodic efficiency is assumed to be near 100%—as hydrogen evolution is not measurable. Some of the polymeric membranes developed pinholes with use. Layered systems have also been designed to avoid the development of pinholes over time. In this paper, we present the results obtained by using polyphosphazenes with a 9:1 ratio of trifluoromethylphenoxy and p-carboxyphenoxy side groups and the lithium salt of the carboxylate function. Poly(organophosphazene) membranes with a single layer and a multilayer structure were tested in 8 M KOH or synthetic seawater for up to 5 days.     

Empirical assessment of the self-medication hypothesis among dually diagnosed inpatients

The aim of this study was to empirically determine the expected effects of drugs of abuse on the psychiatric symptoms of individuals dependent on alcohol and other drugs to assess the validity of the self-medication hypothesis, defined as motivation of patients to seek a specific drug for relief of a particular set of symptoms. Eight-three inpatients in a large metropolitan hospital with an axis I diagnosis of one drug dependence and an axis II diagnosis of personality disorder completed the Hopkins Symptom Checklist-Revised (HSCL-90-R) and the Neuropsychological Impairment Scale (NIS). They also reported the effect of their drug of choice on each of the symptoms included in both tests. Heroin addicts reported that heroin improved some of their psychiatric symptoms and all of their cognitive dysfunctions. Both cocaine and alcohol users reported that their drug of choice worsened their psychiatric and cognitive symptoms. No relationship was found between frequency or severity of symptoms and drug choice. We concluded that attempts at self-medication may have occurred among heroin addicts, but were unlikely among alcoholics and cocaine addicts. We found no evidence in support of the self-medication hypothesis as a necessary reinforcer of continued drug use.     

Comparative performance evaluation of hot spot contention betweenMIN-based and ring-based shared-memory architectures

Hot spot contention on a network-based shared-memory architecture occurs when a large number of processors try to access a globally shared variable across the network. While multistage interconnection network (MIN) and hierarchical ring (HR) structures are two important bases on which to build large scale shared-memory multiprocessors, the different interconnection networks and cache/memory systems of the two architectures respond very differently to network bottleneck situations. In this paper, we present a comparative performance evaluation of hot spot effects on the MIN-based and HR-based shared-memory architectures. Both nonblocking MIN-based and HR-based architectures are classified, and analytical models are described for understanding network differences and for evaluating hot spot performance on both architectures. The analytical comparisons indicate that HR-based architectures have the potential to handle various contentions caused by hot spots more efficiently than MIN-based architectures. Intensive performance measurements on hot spots have been conducted on the BBN TC2000 (MIN-based) and the KSR1 (HR-based) machines. Performance experiments were also conducted on the practical experience of hot spots with respect to synchronization lock algorithms. The experimental results are consistent with the analytical models, and present practical observations and an evaluation of hot spots on the two types of architectures