Functional Diversity,Absorptive Capability and Product Success: The Moderating Role of Project Complexity in New Product Development Teams

Absorptive capability appears to be an appealing concept in the technology and innovation management literature. Though absorptive capability attracts researchers from a variety of disciplines, team‐level empirical research on it is scant. In this study, we operationalized team absorptive capability as a multidimensional construct involving knowledge acquisition, assimilation and exploitation. This study also explores the moderating effect of project complexity between team absorptive capability and new product success. In studying the data from 239 new product development projects using partial least squares structural equation modelling, we found that team functional diversity is a significant determinant of team absorptive capability. Moreover, regarding the relationships between team absorptive capability and new product success, we uncovered that (i) new product success is dependent on the ability to understand the acquired knowledge, and (ii) the teams appear to be more cautious in putting the assimilated knowledge into practice to the extent that project complexity increases.     

Robust estimation in flat fading channels under bounded channel uncertainties

We investigate channel equalization problem for time-varying flat fading channels under bounded channel uncertainties. We analyze three robust methods to estimate an unknown signal transmitted through a time-varying flat fading channel. These methods are based on minimizing certain mean-square error criteria that incorporate the channel uncertainties into their problem formulations instead of directly using the inaccurate channel information that is available. We present closed-form solutions to the channel equalization problems for each method and for both zero mean and nonzero mean signals. We illustrate the performances of the equalization methods through simulations.     

Latent heat energy storage characteristics of building composites of bentonite clay and pumice sand with different organic PCMs

In the present work, six new kinds of building composite PCMs (BCPCMs), PS/octadecane, BC/octadecane, PS/CA–MA, BC/CA–MA, PS/PEG1000, and BC/PEG1000 composites, were prepared by using vacuum impregnation method. The maximum percent of PCM in the composites was assigned to be 12, 13, 18, 23, 30, and 42 wt%, respectively. The form‐stable BCPCMs were characterized using SEM, FT‐IR, DSC, and TG analysis techniques. The characterization results showed the existence of homogenous dispersion of the PCM into the PBM matrixes. The DSC measurements indicated that the melting temperatures of the form‐stable BCPCMs are in the range of 20–33°C while they have latent heats of melting in the range of about 28–55 J/g. These results make them promising BCPCMs for low temperature‐passive TES applications in buildings. Thermal cycling test indicated that the prepared BCPCMs have good thermal reliability and chemical stability. TG analysis proved that the prepared BCPCMs have good thermal durability. In addition, the thermal conductivity of BCPCMs was enhanced considerably by addition of expanded graphite (EG). The improvement in thermal conductivity of the BCPCMs caused appreciably reduction in their melting times. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) walled thermochromic microcapsules and their application to cotton fabrics

This study focused on fabrication of the thermochromic microcapsules and their application to the cotton fabric. In this study, thermochromic systems composed of crystal violet lactone, bisphenol A, and 1-tetradecanol were prepared and microencapsulated by emulsion polymerization method in poly(methyl methacrylate-co-ethylene glycol dimethacrylate-co-glycidyl methacrylate) wall. The microcapsules were analyzed by Fourier transform infrared spectroscopy, scanning electron microscope, transmission electron microscope, differential scanning calorimetry, and thermogravimetric analysis. Their thermoregulating property was tested by T-history test. The results revealed that microcapsules with smooth surfaces, core–shell structured, and spherical shape were successfully produced. The latent heat storage capacity of the microcapsules decreased from 202 J g⁻¹ to 167 J g⁻¹ when their shell/core ratio changed from 0.5/1 to 2/1. Microcapsules were adequately had sufficient thermal resistance to the temperatures they will encounter during their application to textile products and their usage. According to the UV–visible spectroscopy analysis and color measurements, the microcapsules exhibited reversible color change from blue to colorless and vice versa. Besides, the microcapsule impregnated fabric was able to absorb latent heat energy of 21.79 J g⁻¹ at around 35 °C and had cooling effect. According to the colorimetric parameters, the fabric was at blue color at room temperature and became colorless when heated to the temperature above the melting point of thermochromic system. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48815.     

Hydrogen transfer during co-liquefaction of Elbistan lignite and biomass: liquid product characterization approach

In this study, Elbistan lignite (EL) and manure were liquefied under catalytic conditions in an inert atmosphere. Red mud, tetralin, and distilled water were used as a catalyst and solvent, respectively. The liquefaction studies were carried out under catalytic conditions in the catalyst concentration of 9%, solvent/solid ratio of 3/1, reaction time of 60 min, waste/lignite ratio of 1/3, and at temperature of 400°C. Stirring speed and initial nitrogen pressure were kept constant at 400 rpm and 20 bar, respectively. At the end of liquefaction process, the soluble liquefaction products were separated by successive solvent extraction to preasphaltene, asphaltene, and oils. Oil products characterized by H-NMR to be able to differ hydrogen transfer from manure to EL surface. To obtain the hydrogen transfer way, liquefaction experiments conducted under inert atmosphere which does not related to hydrogen reaction, other above experimental conditions were kept same but only solvent type changed. The reason of using distilled water instead of tetraline is tetraline known as hydrogen donor but not water. Because water behaves supercritical conditions during the liquefaction stage. EL liquefied alone while using tetraline however EL liquefied with manure with using distilled water as a solvent. The obtained oil products form both experiments characterized by H-NMR. The radical groups diffraction and range values are not changed significantly shows that manure behaved as an hydrogen donor. So, EL with manure is the one great option to reduce cost of hydrogen source for direct coal liquefaction plant.     

Synthesis and thermal properties of poly(styrene-co-ally alcohol)-graft-stearic acid copolymers as novel solid–solid PCMs for thermal energy storage

A series of poly(styrene-co-allyalcohol)-graft-stearic acid copolymers were synthesized as novel polymeric solid–solid phase change materials (SSPCMs). The graft copolymerization reactions between poly(styrene-co-allyalcohol) and stearoyl chloride were verified by Fourier transform infrared (FT-IR) and Proton Nuclear Magnetic Resonance (¹H NMR) spectroscopy techniques. The crystal morphology of the SSPCMs was investigated using polarized optical microscopy (POM) technique. Thermal energy storage properties of the synthesized SSPCMs were measured using differential scanning calorimetry (DSC) analysis. The POM results showed that the crystalline phase of the copolymers transformed to amorphous phase above their phase transition temperatures. Thermal energy storage properties of the synthesized SSPCMs were investigated by differential scanning calorimetry (DSC) and found that they had typical solid–solid phase transition temperatures in the range of 27–30 °C and high latent heat enthalpy between 34 and 74 J/g. Especially, the copolymer with the mole ratio of 1/1 (poly(styrene-co-allyalcohol)/stearoyl chloride) is the most attractive one due to the highest latent heat storage capacity among them. The results of DSC and FT-IR analysis indicated that the synthesized SSPCMs had good thermal reliability and chemical stability after 5000 thermal cycles. Thermogravimetric (TG) analysis results suggested that the synthesized SSPCMs had high thermal resistance. In addition, thermal conductivity measurements signified that the synthesized PCMs had higher thermal conductivity compared to that of poly(styrene-co-allyalcohol). The synthesized copolymers as novel SSPCMs have considerable potential for thermal energy storage applications such as solar space heating and cooling in buildings and greenhouses.     

Use of ozone in detoxification of aflatoxin B1 in red pepper

Red pepper (Capsicum annuum) is one of the most important agricultural products of Turkey. For public health and export requirements, red pepper must be produced free of hazardous contaminants. However, previous investigations showed that red pepper could be contaminated by aflatoxin above the limits that may be critical for health. In this study, use of the high oxidising power of ozone achieved detoxification of aflatoxin. Samples were subjected to ozonation at various ozone concentrations (16, 33, 66 mg/l) and exposure times (7.5, 15, 30, 60 min). In summary, the reductions of content of aflatoxin B₁ in flaked and chopped red peppers were 80% and 93% after exposures to 33 mg/l ozone and 66 mg/l ozone for 60 min, respectively.     

Recent advances in the preparation of functionalized polysulfones

This review summarizes the studies related to chemical functionalization of polysulfones used in many different applications such as membranes with special functions, nanocomposites, biofilm formation, fuel cells etc. reported in recent years from the literature since 2000. Various strategies have been applied for the functionalization of polysulfones. One strategy is to add desired functionality into starting monomers in the solution containing the main components of commercial polysulfones, the aromatic dihalide sulfone and bisphenol monomers, or to functionalize the related monomers before the condensation. Another approach is to form difunctional polysulfone oligomers. Then, functional groups can be utilized to react with monomers or other polymers to obtain functional polymers or block copolymers. The most applied method is post‐modification of commercially available polysulfones by incorporation of functional groups to their aromatic groups and their use in the formation of graft polymers or polysulfone‐based networks. © 2013 Society of Chemical Industry