Knowledge-Based Virtual Modeling and Simulation of Manufacturing Processes for Industry 4.0

Abstract

Industry 4.0 aims at providing a digital representation of a production landscape, but the challenges in building, maintaining, optimizing, and evolving digital models in inter-organizational production chains have not been identified yet in a systematic manner. In this paper, various Industry 4.0 research and technical challenges are addressed, and their present scenario is discussed. Moreover, in this article, the novel concept of developing experience-based virtual models of engineering entities, process, and the factory is presented. These models of production units, processes, and procedures are accomplished by virtual engineering object (VEO), virtual engineering process (VEP), and virtual engineering factory (VEF), using the knowledge representation technique of Decisional DNA. This blend of the virtual and physical domains permits monitoring of systems and analysis of data to foresee problems before they occur, develop new opportunities, prevent downtime, and even plan for the future by using simulations. Furthermore, the proposed virtual model concept not only has the capability of Query Processing and Data Integration for Industrial Data but also real-time visualization of data stream processing.     

Polyetherimide-LaNi5 composite films for hydrogen storage applications

This study investigates the preparation of polyetherimide (PEI) – LaNi₅ composites films for hydrogen storage. Prior to the polymer addition, LaNi₅ was ball-milled at different conditions (250, 350, and 450 RPM) and annealed at 500 °C for 1 h under vacuum. The composites were produced with BM-LaNi₅-350 (PEI/LaNi₅-350) and annealed BM-LaNi₅-350 (PEI/LaNi₅-350-TT). Membranes were successfully produced through solvent casting assisted by an ultrasonic bath. The particles dispersion and the film morphology did not change after hydrogenation cycles. In the H₂ sorption experiments at 43 °C and 20 bar, the films stored H₂ without incubation time; both samples reached a capacity of ~0.6 wt%. The H₂ sorption kinetics of PEI/LaNi₅-350 was comparable to that of BM-LaNi₅-350, whereas PEI/LaNi₅-350-TT presented significantly slower kinetics. LaNi₅ oxidation was hindered by PEI, showing that it can be explored to improve metal hydrides air resistance. The results demonstrated that PEI films filled with LaNi₅ are promising materials for hydrogen storage.     

Visceral Obesity and Its Shared Role in Cancer and Cardiovascular Disease: A Scoping Review of the Pathophysiology and Pharmacological Treatments

The association between obesity, cancer and cardiovascular disease (CVD) has been demonstrated in animal and epidemiological studies. However, the specific role of visceral obesity on cancer and CVD remains unclear. Visceral adipose tissue (VAT) is a complex and metabolically active tissue, that can produce different adipokines and hormones, responsible for endocrine-metabolic comorbidities. This review explores the potential mechanisms related to VAT that may also be involved in cancer and CVD. In addition, we discuss the shared pharmacological treatments which may reduce the risk of both diseases. This review highlights that chronic inflammation, molecular aspects, metabolic syndrome, secretion of hormones and adiponectin associated to VAT may have synergistic effects and should be further studied in relation to cancer and CVD. Reductions in abdominal and visceral adiposity improve insulin sensitivity, lipid profile and cytokines, which consequently reduce the risk of CVD and some cancers. Several medications have shown to reduce visceral and/or subcutaneous fat. Further research is needed to investigate the pathophysiological mechanisms by which visceral obesity may cause both cancer and CVD. The role of visceral fat in cancer and CVD is an important area to advance. Public health policies to increase public awareness about VAT’s role and ways to manage or prevent it are needed.     

Evaluating acrosome reaction steps with brightfield and differential interference contrast microscopy techniques.

Acrosomal integrity of bovine spermatozoa was evaluated using naphthol yellow S-erythrosine B stain with bright-field microscopy, .2% glutaraldehyde fixation with Nomarski optics, and live wet smears with Nomarski optics to compare the evaluation techniques. Four ejaculates per two Holstein bulls were enriched through a Percoll gradient, capacitated with heparin, and acrosome-reacted with lysophosphatidylcholine to prepare spermatozoa for in vitro fertilization. Spermatozoa samples were taken after each preparatory step, and percentage of intact acrosomes was evaluated with the stain, .2% glutaraldehyde, and live wet smear. Acrosomal integrity decreased with each preparatory step across all techniques. The decrease in integrity from heparin to lysophosphatidylcholine indicated that all methods detected the acrosome reaction. Technique means across preparation steps showed no differences. Correlations between microscopy techniques were high. The live wet smear used no fixation methods. Both the naphthol yellow S-erythrosine B stain and the .2% glutaraldehyde techniques employed fixation steps that may have introduced artifacts that could influence the data. The live wet smear evaluated by Nomarski optics allowed a comparable evaluation of the acrosome-reacted bovine spermatozoa. Comparing brightfield with differential interference contrast microscopy for detecting the acrosome reaction in bovine spermatozoa showed that both methods were equally accurate.     

Electrochemical improvement of low-temperature petroleum cokes by chemical oxidation with H2O2 for their use as anodes in lithium ion batteries

The electrochemical performance of non-graphitized petroleum cokes has been improved by mild oxidation using hydrogen peroxide, a procedure used for the first time in these materials. For this purpose, various carbonisation temperatures and H₂O₂ treatments were tested. For low sulfur content cokes, the aqueous oxidative treatment significantly increases the capacity values above 372 mAh/g during the first cycles. In contrast, cokes with a sulfur content of ca. 5%, did not shown a real improvement. The former results have been interpreted in terms of an effective oxidation of the particles surface, which removes unorganized carbon, where lithium can be irreversibly trapped. Moreover, a stable and less resistive passivating layer grows during the first discharge of lithium, as revealed by impedance spectroscopy. Therefore, chemical procedures, as mild oxidation, open an interesting field of research for the improvement of disordered carbons as anode materials in lithium ion batteries.     

The minimum dosage of praziquantel in the treatment of Taenia saginata, 1986-1993

Patients who have a unicornuate uterus with a noncommunicating rudimentary horn that contains an endometrial cavity are at risk for endometriosis and obstetric complications. As in this case, resection of the rudimentary horn can be performed laparoscopically without increased risk to the patient and with some potential benefit.     

Carbon monoxide and water vapor contamination of compressed breathing air for firefighters and divers

Compressed breathing air, used in self-contained breathing apparatus (SCBA) by firefighters and other categories of workers as well as by recreational and commercial divers, is prepared with the aid of high-pressure compressors operating in the range of 5000 psig. There have been reports of unexplained deaths of SCUBA divers and anecdotal accounts of decreased time to exhaustion in firefighters using SCBAs. Compressed breathing air has been found to contain elevated levels of carbon monoxide (CO) and water vapor that are consistent with carboxyhemoglobin (COHb) poisoning and freezing of the user's regulator on the breathing apparatus. The Coburn-Forster-Kane equation (CFK equation) was used to estimate COHb levels at rest and at maximum exercise when exposed to different levels of CO in contaminated breathing air. The results demonstrated that, at maximum exercise, the COHb ranged from 6.0 to 17% with the use of 1 to 4 SCBA cylinders contaminated by 250 ppm CO. Standard operating procedures have been developed at the Montreal Fire Department to minimize the risk of compressed breathing air contamination. Results of the quality analysis/quality control program indicate that implementation of these procedures has improved the quality of the compressed breathing air. Recommendations are made for improvement of the air testing procedures mandated by the Canadian CAN3 180.1-M85 Standard on Compressed Breathing Air and Systems.     

Evaluating a graphical notation for modelling software development methodologies

This work aims at evaluating a graphical notation for modelling software (and other kinds of) development methodologies, thus demonstrating how useful the graphical aspects can be for sharing knowledge between the people responsible for documenting information and those responsible for understanding and putting it into practice. We acknowledge the importance of having a common set of symbols that can be used to create, use and disseminate information for a larger audience than is possible today with a variety of alternatives and lack of a common ground. Using a cognitive dimensions framework, we make a standard evaluation of the elements and diagrams of the notation proposed to support the ISO/IEC 24744 methodology metamodel standard, considering the trade-offs between different dimensions. We suggest improvements to this existing notation based on this analysis, in the context of improving communication between creators and users of methodologies.