The synthesis of pixelated metamaterial cross polarizer using binary wind driven optimization algorithm

Microsystem Technologies - In this paper synthesis of two wideband Metamaterial Cross Polarizer (MCPs) is proposed. The synthesis of proposed MCPs is done by using Binary Wind Driven Optimization...     

An automated software reliability prediction system for safety critical software

Software reliability is one of the most important software quality indicators. It is concerned with the probability that the software can execute without any unintended behavior in a given environment. In previous research we developed the Reliability Prediction System (RePS) methodology to predict the reliability of safety critical software such as those used in the nuclear industry. A RePS methodology relates the software engineering measures to software reliability using various models, and it was found that RePS’s using Extended Finite State Machine (EFSM) models and fault data collected through various software engineering measures possess the most satisfying prediction capability. In this research the EFSM-based RePS methodology is improved and implemented into a tool called Automated Reliability Prediction System (ARPS). The features of the ARPS tool are introduced with a simple case study. An experiment using human subjects was also conducted to evaluate the usability of the tool, and the results demonstrate that the ARPS tool can indeed help the analyst apply the EFSM-based RePS methodology with less number of errors and lower error criticality.     

Structural and Luminescence Studies on Barium Sodium Borosilicate Glasses Containing Uranium Oxides

Barium sodium borosilicate glasses containing different amounts of uranium oxides were prepared by conventional melt quench method and investigated for their structural aspects by ²⁹Si and ¹¹B MAS NMR technique combined with steady‐state luminescence and lifetime measurements. Based on MAS NMR studies, it is confirmed that uranium ions act as network modifier up to 15 wt% and beyond which a separate uranium containing phase is formed. From the luminescence studies, it is inferred that uranyl species is in a highly distorted environment. For more than 15 wt% uranium oxide incorporation, weaker U–O–U linkages are formed at the expense stronger U–O–Si/B linkages, as suggested by the excited state lifetime value of the uranyl species as well as red shift in emission peak maximum. For glass samples containing more than 25 wt% uranium oxides, crystalline barium uranium silicate gets phase separated from glass matrix as confirmed by XRD studies.     

Effect of pH on the detailed chemical nature and metal-carbonate species in as synthesized zirconia alumina composites

Zirconia was deposition precipitated on γ-alumina in pH range 7-10 from zirconium oxy-nitrate and soda ash. Zirconium formed its hydroxycarbonate as deduced from ICP-EOS, CHN, and TGA-MS. Higher pH favored formation of carbonate species of zirconium over its hydroxide. TGA-MS indicated formation of three different types of carbonate species. FTIR results corroborated this. Monodentate metal carbonate was observed irrespective of pH of preparation. In addition, bridged bidentate species formed at pH ≤ 8 which changed to chelating bidentate at pH > 8. XRD indicated that all the samples formed tetragonal-zirconia upon calcination irrespective of pH of preparation. Higher pH resulted in smaller crystallites of t-ZrO₂. Changes in chemical moiety with pH reflected on acidity and the deactivation rate for 2-methyl-3-butyn-2-ol which decreased by two orders of magnitude in samples prepared at higher pH. Surface area and pore volume benefited from deposition precipitation. SEM-EDAX showed reasonable distribution of zirconia over γ-Al₂O₃.     

Environmental over enthusiasm

India needs large dams for water storage, hydropower and flood control. It also needs long-distance inter-basin water transfers. However, India has a complex and strict environmental regulatory system which ignores a developing economy's needs and peoples' aspirations and is often impractical. This is used by activists to thwart infrastructure building, and, when faced with development slowdown, the government tries to thwart the laws they themselves have made. India's food, water and energy security, economic, and poverty-alleviation plans are in jeopardy unless environmental regulators realize that the regulations are being misused and that environmental over-enthusiasm is benefiting neither development nor the environment.     

Reduction of hexavalent chromium by Bacillus sp. isolated from chromite mine soils and characterization of reduced product

BACKGROUND: The reduction of highly mobile and toxic hexavalent chromium by bacterial strains is considered to be a viable alternative to reduce Cr(VI) contamination, in soils and water bodies, emanating from the overburden dumps of chromite ores and mine drainage. The present study reports the isolation of Cr(VI) resistant bacterial strains from an Indian chromite mine soil and their potential use in reduction of hexavalent chromium. RESULTS: Among the isolates, a bacterial strain (CSB‐4) was identified as Bacillus sp. based on standard biochemical tests and partial 16SrRNA gene sequencing, which was tolerant to as high as 2000 mg L^?1 Cr(VI) concentration. The strain was capable of reducing Cr(VI) to Cr(III) in different growth media. Under the optimized conditions pH ～7.0, 100 mg L^?1 Cr(VI), 35 °C temperature and stirring speed 100 rpm, CSB‐4 reduced more than 90% of Cr(VI) in 144 h. The time course reduction data fitted well an exponential rate equation yielding rate constants in the range 3.22 × 10^?2 to 6.5 × 10^?3 h^?1 for Cr(VI) concentration of 10–500 mg L^?1. The activation energy derived from temperature dependence rate constants between 25 and 35 °C was found to be 99 kJ mol^?1. The characterization of reduced product associated with bacterial cells by SEM‐EDS, FT‐IR and XRD was also reported. CONCLUSION: Reasonably high tolerance and reduction ability of indigenous Bacillus sp. (CSB‐4) for Cr(VI) under a wide range of experimental conditions show promise for its possible use in reclamation of chromite ore mine areas including soils and water bodies. Copyright © 2010 Society of Chemical Industry     

Dynamic Spectrum Access with QoS and Interference Temperature Constraints

Spectrum is one of the most precious radio resources. With the increasing demand for wireless communication, efficiently using the spectrum resource has become an essential issue. With the Federal Communications Commission's (FCC) spectrum policy reform, secondary spectrum sharing has gained increasing interest. One of the policy reforms introduces the concept of an interference temperature - the total allowable interference in a spectral band. This means that secondary users can use different transmit powers as long as the sum of these power is less than the interference threshold. In this paper, we study two problems in secondary spectrum access with minimum signal to interference noise ratio (quality of service (QoS)) guarantee under an interference temperature constraint. First, when all the secondary links can be supported, a nonlinear optimization problem with the objective to maximize the total transmitting rate of the secondary users is formulated. The nonlinear optimization is solved efficiently using geometric programming techniques. The second problem we address is, when not all the secondary links can be supported with their QoS requirement, it is desirable to have the spectrum access opportunity proportional to the user priority if they belong to different priority classes. In this context, we formulate an operator problem which takes the priority issues into consideration. To solve this problem, first, we propose a centralized reduced complexity search algorithm to find the optimal solution. Then, in order to solve this problem distributively, we define a secondary spectrum sharing potential game. The Nash equilibria of this potential game are investigated. The efficiency of the Nash equilibria solutions are characterized. It is shown that distributed sequential play and an algorithm based on stochastic learning attain the equilibrium solutions. Finally, the performances are examined through simulations     

Majorisations for the eigenvectors of graph-adjacency matrices

We develop majorisation results that characterise changes in eigenvector components of a graph's adjacency matrix when its topology is changed. Specifically, for general (weighted, directed) graphs, we characterise changes in dominant eigenvector components for single- and multi-row incrementations. We also show that topology changes can be tailored to set ratios between the components of the dominant eigenvector. For more limited graph classes (specifically, undirected, and reversibly-structured ones), majorisations for components of the subdominant and other eigenvectors upon graph modifications are also obtained.     

Effect of Dopants and Sintering Method on the Properties of Ceria-Based Electrolytes for IT-SOFCs Applications

Doped and co-doped ceria ceramics are used as electrolyte materials in solid oxide fuel cells. In this work, ceria-based oxides, Ce_0.90Gd_0.06Y_0.02M_0.02O_2?δ (M?=?Ca, Fe, La, and Sr) were prepared by conventional as well as microwave processing from the precursors prepared by the mixed oxide method. The consolidated calcined powders in pellet form were sintered in microwave energy at 1400°C for 20 min and in an electric furnace of IR radiation at 1400°C for 6 h. The x-ray diffraction analysis confirmed that all the compositions were crystallized into a cubic fluorite structure. Surface morphology of the sintered products was studied using scanning electron microscopy and the microhardness was investigated using the Vickers hardness test. The comparative results analysis shows that the microwave-sintered samples have uniform grain growth, higher density and higher microhardness than the corresponding conventionally sintered products. The microwave-sintered sample of composition Ce_0.90Gd_0.06Y_0.02Sr_0.02O_2?δ was found to have the highest microhardness among the four compositions due to its high density and smallest grain size.     

Influence of pentavalent dopant addition to polarization and bioactivity of hydroxyapatite

Influence of pentavalent tantalum doping in bulk hydroxyapatite (HAp) ceramics has been investigated for polarizability and bioactivity. Phase analysis from X-ray diffraction measurement indicates that increasing dopant concentration decreased the amount of HAp phase and increased β-TCP and/or α-TCP phases during sintering at 1250 °C in a muffle furnace. Results from thermally stimulated depolarization current (TSDC) measurements showed that doping hindered charge storage ability in HAp ceramics, and doped samples stored fewer charge compared to pure HAp. However, doping enhanced wettability of HAp samples, which was improved further due to polarization. In vitro human osteoblast cell–material interaction study revealed an increase in bioactivity due to dopant addition and polarization compared to pure HAp. This increase in bioactivity was attributed to the increase in wettability due to surface charge and dopant addition.