More investigations of leakage and nonleakage conductor-backedcoplanar waveguide

Through rigorous full-wave analysis, the effective dielectric constant, normalized attenuation constant, characteristic impedance, and radiation pattern of two types of conductor-backed coplanar waveguides are obtained. The analytic results show that the leakage effect is not only controlled by the thickness and dielectric constant of the substrate but also by the slot width. The leakage power transforms to a radiation space wave and a surface wave, the transverse electric field diagrams in the substrate and the far-zone radiation pattern verify the leakage phenomenon. The first structure has the maximum radiation intensity in the endfire direction, while the second one which has more leaky waves radiates into the air, is better served as a radiating device. For both structures under the nonleakage condition, the characteristic impedance is sensitive to the change of the strip width but not the slot width. Using these properties, the nonleaky and leaky circuits can exist on the same circuit board by choosing appropriate circuit dimensions     

Self-Consistent Effects on the Starting Current of Gyrotron Oscillators

Self-consistent effects on the starting current of gyrotron oscillators are examined. Field profiles in the open cavity are shown to be sensitive to the interaction dynamics. This can either significantly raise or lower the oscillation threshold, particularly for the low-Q modes. The transition from resonant-mode oscillations at the low magnetic field to backward-wave oscillations at the high magnetic field is demonstrated.     

Dynamic Bending Strains in Planar Trusses with Pinned or Rigid Joints

The method of reverberation ray matrix is applied to analyze the dynamic behavior of structural members in trusses with pinned joints subjected to suddenly applied force. The results are compared with those in planar trusses with rigid joints. Detailed calculations are made with two types of trusses, a small laboratory model made of slender aluminum bars, and a hypothetical real size Pratt truss made of structural steel. It is found that the maximum dynamic bending strains in the members of both types of trusses are very large, comparable with the dynamic axial strains in the same member. The magnitudes of bending strains in the pinned truss differs little from those in the truss with rigid joints for both types of trusses. Such a large dynamic bending strain in a structure member, which is contradictory to the static behavior of the same truss, could be caused by the inertial force of the mass in structural members of the truss.     

Stochastic choice of basis functions in adaptive functionapproximation and the functional-link net

A theoretical justification for the random vector version of the functional-link (RVFL) net is presented in this paper, based on a general approach to adaptive function approximation. The approach consists of formulating a limit-integral representation of the function to be approximated and subsequently evaluating that integral with the Monte-Carlo method. Two main results are: (1) the RVFL is a universal approximator for continuous functions on bounded finite dimensional sets, and (2) the RVFL is an efficient universal approximator with the rate of approximation error convergence to zero of order O(C/ radicaln), where n is number of basis functions and with C independent of n. Similar results are also obtained for neural nets with hidden nodes implemented as products of univariate functions or radial basis functions. Some possible ways of enhancing the accuracy of multivariate function approximations are discussed.     

Isotope effect and tTc suppression in d-wave superconductors

We have studied the isotope effect on the superconducting transition temperatureT _c ofd-wave pairing instabilities due to antiferromagnetic spin fluctuation exchange. We found that models with conventional coupling toharmonic phonon degrees of freedom and reasonable limits on coupling strength and phonon spectra, give values for the isotope exponent which are at least one order of magnitude smaller than typical observed values of in the cuprates. Models with coupling to non-linear tunneling modes in a stronglyanharmonic multi-well lattice potential and realistic coupling strengths have effectively larger isotopic mass dependences andmay therefore account for the observed magnitudes of.This work was supported by the National Science Foundation (Grant DMR-8913878 and DMR-9215123) and by the University of Georgia Office of the Vice President for Research. Computing support from UCNS, University of Georgia, and NCSA, University of Illinois, is gratefully acknowledged.     

A simple spatial integration scheme for solving Cauchy problems of non-linear evolution equations

In this study, we address a new and simple non-iterative method to solve Cauchy problems of non-linear evolution equations without initial data. To start with, these ill-posed problems are analysed by utilizing a semi-discretization numerical scheme. Then, the resulting ordinary differential equations at the discretized times are numerically integrated towards the spatial direction by the group-preserving scheme (GPS). After that, we apply a two-stage GPS to integrate the semi-discretized equations. We reveal that the accuracy and stability of the new approach is very good from several numerical experiments even under a large random noisy effect and a very large time span.     

M-estimator with asymmetric influence function for estimating the Burr type III parameters with outliers

The Burr type III distribution allows for a wider region for the skewness and kurtosis plane, which covers several distributions including the log-logistic, and the Weibull and Burr type XII distributions. However, outliers may occur in the data set. The robust regression method such as an M-estimator with symmetric influence function has been successfully used to diminish the effect of outliers on statistical inference. However, when the data distribution is asymmetric, these methods yield biased estimators. We present an M-estimator with asymmetric influence function (AM-estimator) based on the quantile function of the Burr type III distribution to estimate the parameters for complete data with outliers. The simulation results show that the M-estimator with asymmetric influence function generally outperforms the maximum likelihood and traditional M-estimator methods in terms of the bias and root mean square errors. One real example is used to demonstrate the performance of our proposed method.     

On the performance of multicarrier DS-CDMA with imperfect power control and variable spreading factors

Multicarrier direct-sequence code-division multiple access (MC-DS-CDMA) becomes an attractive technique for the future fourth-generation (4G) wireless system because it can flexibly adapt transmission rates by changing both time and frequency spreading factors and possesses many physical-layer advantages in dispersive fading channels. However, power control errors (PCE) and the complete multiple access interference (MAI) from all the intersubcarriers may significantly degrade the performance of the MC-DS-CDMA system. In this paper, we propose an analytical method to evaluate the joint effects of the PCE and the complete MAI on the multirate MC-DS-CDMA system. From analysis and simulation, we obtain some important insights into the performance issues of the MC-DS-CDMA system. First, the effect of PCE can exacerbate the impact of the complete MAI on the MC-DS-CDMA system, or vice versa . For BER=10/sup -3/ in a considered case, the joint effect of the complete MAI and PCE further degrades the performance by 2.1 dB compared with the sum of the degradation from the complete MAI and the PCE individually. Second, increasing frequency or time-domain spreading gain can improve the performance of the MC-DS-CDMA system, but the system also becomes more sensitive to power control errors. Third, a larger PCE can possibly make the frequency-domain diversity diminish faster than the gain obtained from the time-domain spreading although an MC-DS-CDMA system with a larger frequency-domain spreading gain (M) is usually better than that with a larger time-domain spreading gain (G/sub o/). In our example, for the standard deviation of PCE (/spl sigma//sub e/) equal to 0 dB, the BERs with (M,G/sub o/)= (4, 16) and (16, 4) are 9.3/spl times/10/sup -4/ and 3.7/spl times/10/sup -5/, respectively, while for /spl sigma//sub e/=4 dB, the BER performances of the two cases are all in the order of 10/sup -3/.     

The dynamic characteristics of taper seals

Abstract

The dynamic characteristics of taper seal has been investigated. The approach is similar to Black's analysis; the stiffness and damping coefficients are derived. The results showed that the taper seals presented more stable characteristics comparing with plain seals. The practical application of this theory is increasingly used in industry.     

Corrosion-Fatigue Behavior of Aluminum Alloy 5083-H131 Sensitized at 448?K (175?°C)

The fatigue crack growth behavior of aluminum alloy 5083-H131 has been systematically studied as a function of degree of sensitization for aging at 448?K (175?°C). Fatigue crack growth rates were measured at load ratios of 0.1 and 0.85, in vacuum, air, and a corrosive aqueous environment containing 1?pct NaCl with dilute inhibitor. Sensitization does not affect the fatigue crack growth behavior of Al 5083-H131 significantly in vacuum or air, at low- or high-load ratio. For high-load ratio, in the 1?pct NaCl+inhibitor solution, the threshold drops by nearly 50?pct during the first 200?hours of aging, then it degrades more slowly for longer aging times up to 2000?hours. The change in aging behavior at approximately 200?hours seems to be correlated with the transition from partial coverage of the grain boundaries by ?? Al₃Mg₂ phase, to continuous full ?? coverage. ASTM G-67 mass loss levels below approximately 30?mg/cm² do not exhibit degraded corrosion-fatigue properties for R?=?0.85, but degradation of the threshold is rapid for higher mass loss levels.