Random poly(ε‐caprolactone‐L‐alanine) by direct melt copolymerization

A series of random polyesteramides (PEAs) with a range of molar composition from 90/10 to 50/50 were synthesized by direct melt polycondensation of ε‐caprolactone and l ‐alanine. Their structure was fully characterized by Fourier transform IR and NMR spectroscopy. The resulting copolymers are completely amorphous with the exception of PEA‐90/10 which possesses a semicrystalline structure. These PEAs present increasing glass transition temperatures at increasing l ‐alanine contents and exhibit fairly good thermal stability with 10% mass loss temperatures reaching 315 °C. © 2020 Society of Industrial Chemistry     

Calcium carbonate and ammonium polyphosphate flame retardant additives formulated to protect ethylene vinyl acetate copolymer against fire: Hydrated or carbonated calcium?

In this study, the effect of the chemical nature of different calcium (Ca)-based minerals as flame retardant additives in combination with ammonium polyphosphate (APP), in 1:1 proportions, on the flame retardancy behavior and performance of ethylene vinyl acetate copolymer was discussed. Combining APP with partly and completely hydrated calcium oxide led to superior flame-retardant function detected in mass loss calorimeter measurements with respect to the corresponding system containing carbonated calcium. This privileged character was attributed to the higher reactivity of hydrated Ca-based fillers toward APP in comparison with Ca carbonate, which induced the formation of an intumescent residue. The difference between reactivity potential of hydrated and dry Ca was demonstrated by the newly formed thermally stable species, and further evidenced by thermogravimetric analysis performed on APP/fillers blends. Moreover, the presence of more crystalline domains in the Ca/phosphorus-based compounds was evidenced by XRD analysis of the mass loss calorimeter test residues. The results of this work highlight the role of blend additive systems on the performance of flame retardancy of polymer materials.     

A memetic algorithm for the multi-compartment vehicle routing problem with stochastic demands

The multi-compartment vehicle routing problem (MC-VRP) consists of designing transportation routes to satisfy the demands of a set of customers for several products that, because of incompatibility constraints, must be loaded in independent vehicle compartments. Despite its wide practical applicability the MC-VRP has not received much attention in the literature, and the few existing methods assume perfect knowledge of the customer demands, regardless of their stochastic nature. This paper extends the MC-VRP by introducing uncertainty on what it is known as the MC-VRP with stochastic demands (MC-VRPSD). The MC-VRPSD is modeled as a stochastic program with recourse and solved by means of a memetic algorithm. The proposed memetic algorithm couples genetic operators and local search procedures proven to be effective on deterministic routing problems with a novel individual evaluation and reparation strategy that accounts for the stochastic nature of the problem. The algorithm was tested on instances of up to 484 customers, and its results were compared to those obtained by a savings-based heuristic and a memetic algorithm (MA/SCS) for the MC-VRP that uses a spare capacity strategy to handle demand fluctuations. In addition to effectively solve the MC-VRPSD, the proposed MA/SCS also improved 14 best known solutions in a 40-problem testbed for the MC-VRP.     

Experimental tracking of silica dispersion into silicone polymer

This work deals with the experimental tracking of a dispersion of very fine silica particles in PDMS using a new, easily implemented methodology. The dispersion experiments are carried out in an 8-l capacity mixer equipped with a torquemeter. Using a Couette analogy, the torque-rotational speed data can be converted into process viscosity-effective shear rate data. Simultaneously, the Particle Size Distribution (PSD) evolution is followed through Laser Light Scattering measurements on diluted samples. The PSD evolution allowed us to interpret the dispersion process in terms of different mechanisms, such as breaking-up and erosion of aggregates, as well as, in some cases, re-agglomeration (or flocculation) of particles.     

Mechanical Properties and Microstructure of a Metakaolin-Based Inorganic Polymer Mortar Reinforced with Quartz Sand

Silicon - The synthesis, mechanical behaviour, and microstructure of metakaolin-based geopolymer mortar reinforced with quartz sand are presented in this investigation. Fine sand (quartz sand)...     

Tribological behavior of composites fabricated by reactive SPS sintering in Ti-Si-C system

In this study, wear and friction behavior of two based-composites from the Ti-Si-C system, (40 wt% TiC; 28 wt% Ti₅Si₃; 17 wt% Ti₃SiC₂) and (18 wt% TiC; 26 wt% Ti₅Si₃; 41 wt% Ti₃SiC₂) reinforced by 15 wt% of large size SiC (100-150 µm) particles were investigated. The four-phase composites exhibited approximatively the same friction coefficient (µ ~ 0.9) under high loads (10 N and 7 N). The composite with high Ti₃SiC₂ showed higher wear rate values by one order of magnitude. However, under 1 N, the composite with high TiC content showed a higher running-in period and a lower steady state µ value (0.37 after 1000 m sliding distance). Scanning electron microscopy, Energy Dispersive X-Ray and Raman spectroscopy analysis of the worn surfaces of the two composites revealed that oxidation was the dominant wear mechanism. The oxidation process and the removal kinetics of the oxides during sliding controlled the tribological behavior of the composites. The influence of processing variables on microstructures development and wear mechanisms of the composites is discussed.     

Aging and inhibition processes: The case of metaphor treatment.

The inhibitory deficit hypothesis has often been cited as a possible explanation for cognitive changes related to age. The aim of this study was to develop a new procedure for evaluating effortful inhibition on the basis of the comprehension of metaphors. Our experiment was carried out on younger and older adults, in whom we also measured inhibitory capacity, working memory, and processing speed. The results show that older participants required a longer time and made more frequent errors in rejecting metaphors versus literally false statements. The interference effect was predicted by the psychometric tests designed to evaluate inhibition. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Vancomycin dimerization and chiral recognition studied by high-performance liquid chromatography

The retention and separation of D,L-dansylvaline enantiomers (used as test solutes) were investigated using silica gel as stationary phase and vancomycin as chiral mobile-phase additive. A retention model was developed to describe the mechanistic aspects of the interaction between solute and vancomycin in the chromatographic system. It considered the formation of vancomycin dimers both "free" in the mobile phase and adsorbed on silica. By fitting the model equation to experimental data, it appeared clearly that the approach taking into account the vancomycin dimerization described accurately the retention behavior of the compounds. The examination of the model equation parameters showed that the glycopeptide dimerization increased the enantioselectivity by a factor of approximately 3.7. This study demonstrated the preponderant role of the vancomycin dimerization on the chiral recognition process of D,L-dansylvaline. Also, an additional analysis on a vancomycin chiral stationary phase indicated that the addition of vancomycin in the mobile phase promoted a greater enantioselectivity mediated by the formation of dimers in the stationary phase.     

Choice of B-splines with free parameters in the flexible discriminant analysis context

Flexible discriminant analysis (FDA) is a general methodology which aims at providing tools for multigroup non linear classification. It consists in a nonparametric version of discriminant analysis by replacing linear regression by any nonparametric regression method. A new option for FDA, consisting in a nonparametric regression method based on B-spline functions, will be introduced. The relevance of the transformation (hence the discrimination) depends on the parameters defining the spline functions: degree, number and location of the knots for each continuous variable. This method called FDA-FKBS (Free Knot B-Splines) allows to determine all these parameters without the necessity of many prior parameters. It is inspired by Reversible Jumps Monte Carlo Markov Chains but the objective function is different and the Bayesian aspect is put aside.     

As(V) retention and As(III) simultaneous oxidation and removal on a MnO2-loaded polystyrene resin

Based on KMnO4 oxidative capacity, a polystyrene matrix loaded with manganese dioxide was synthesized from an anionic commercial resin in chloride form. This medium, called R-MnO2, was tested for As(V) retention and for As(III) simultaneous oxidation and removal. Equilibrium was reached in 2 h and isotherms showed that R-MnO2 maximal capacities towards As(III) and As(V) are, respectively, 0.7 and 0.3 mmol/g. Various mechanisms were involved in As(III) retention: oxidation of H3AsO3(0) by MnO2(s) leading to the formation of HAsO4(2)- and Mn2+, fixation of As(V) formed on the resin beads and precipitation of Mn3(AsO4)2 with Mn2+ released. Successive arsenic desorption and retention steps were performed and showed that the quantity desorbed was low compared to the quantity removed during the first stage of the process. A second removal step, carried out under the same conditions as the first one, proved that the matrix second-removal capacity was weak. This solid sorbent, although not reusable, can be considered in field application as arsenic retention is really strong.